INNOVACERA Alumina Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy needed by hot air fans and ignition blowers.Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Alumina Ceramic Heater Specification: > Voltage: 120V/230V > Power: 160W, 180W, 210W, 225W, 230W, 240W, 255W > Tube Size: OD10.5 × ID6.5 × L90 mm > Supporting Socket: NO.4/NO.5/NO.6/NO.29 > Lead wire: 300mm/400mm/500mm/900mm (Customized is accept) > Range of temperature: 800~1100 °C Ceramic igniter technology benefits: * A fraction of the energy consumption compared to element heater. * Long-lasting (non-aging). * Time to ignition 60~90 seconds. * Tested to 100,000 cycles. * Easy to install and retrofit. * 800~1100°C at steady-state temperature. * Impervious to oxidation and corrosion.
China
INNOVACERA® Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Specification: Voltage: 120V/230V Power: 160 W, 180 W, 210 W, 225 W, 230 W, 240 W, 255 W Tube Size: OD10.5 × ID6.5 × L90 mm Supporting Socket: NO.4/NO.5/NO.6/NO.29 Lead wire: 300mm/400mm/500mm/900mm (Customized is accept) Range of temperature: 800~1100 °C Ceramic igniter technology benefits: A fraction of the energy consumption compared to conventional cartridge or element heater. Long-lasting (non-aging). Time to ignition 60~90 seconds. Tested to 100,000 cycles. Easy to install and retrofit. 800~1100°C at steady-state temperature. Impervious to oxidation and corrosion.
Request for a quoteChina
INNOVACERA® Ceramic hot surface igniters for pellet boilers only need approx. 1/10 of the energy of that needed by hot air fans and ignition blowers. Their ignition capacity lies between 120 and 350 W. Depending on the positioning of the ignition element in the boiler, the ignition time of approx. 60 seconds is extremely short. This also means minimal emissions. Specification: Voltage: 120V / 230V Power: 300W / 350W Tube Size: OD11.5 × ID6.5 × L108 mm Supporting Socket: NO.43 Lead wire: 300mm / 400mm / 500mm / 900mm (Customized is accept) Range of temperature: 800~1100 °C Applications: Kerosene fan heater Wood pellet, wood chips stove or boiler Small scale biomass industrial furnace ignition Incense burner
Request for a quoteChina
Product Specification: Application: Used for 936 soldering station Voltage: 24VAC Heating Resistance: 3.0±0.3Ω (23℃±2℃) Dimension: L60*φ3.8mm Electrode: Welding 4 nickel wires on the surface
Request for a quoteChina
Black Coating Type 220V 230V 240V Alumina Pellet Ceramic Igniter Alumina Ceramic Hor Surface Igniter can reach a permanent working temperature above 1000℃;Since air can through and around inside and outside of the heater tube. Heat can be transferred from both inside and outside of ther heater element. Igniting wood chips, firewood, coal bricks or other biomass fuel. > Dimension: 106*11.5mm (Or Customized) > Voltage: 230V > Power: 270W - 315W > Lead wire: 300mm / 400mm / 500mm / 900mm (Customized is accept) > Range of temperature: 800~1000°C > Electrode: Welding leads on the electrode FEATURES: 1、Black coating type 2、300W+5%-10% 3、60-90 seconds ignition time 4、Available in 120V 220V-240V 5、ROHS/REACH certification 6、Many design available 7、Customized welcome
Request for a quote