Cast iron motors - Import export

"Slip ring motors are often used in applications where the maximum transient torque must be greater than a conventional cage induction motor, such as quarries. SLIP RING MOTORS (OUR CODE: MB) - Three-phase wound rotor motors - Standard cast iron housing - Stored in IP55 protection and on request in IP23 - Stored in 230/400V from 22kW to 315kW , 400/690V to 560kW - Operating in 50/60hz - Other special voltages or insulation class H on request - Form B3-B5-V1- B35-V15 - Stored in S1 service or S3 service (6 starts per hour) - On request, we can supply motors for lifting applications with 1 or 2 cylindrical or conical axes - Standard motors equipped with PTC sensors - Equipped with roller bearings for belt drive - Electrolytic starters are stocked to start these motors"

"Cast iron motors are an ideal solution for our customers who want motors that can withstand harsh/aggressive environments. STANDARD CAST IRON MOTORS (OUR CODE: MF): - Three-phase motors with cast iron housing - IP55 protection - Class F insulation - Class B heating - Legs molded in the casing - Stored in 230/400V - 400/690V or 500V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE3/IE4 (tomorrow IE5) - In 8 poles, we have IE1 and IE3 since there are no standards yet in force above 375kW - and up to 1,400kW - Form B3-B5-V1-B14-B35-V15-B34 - Standard motors with PTC sensors from size 132 upwards - Standard motors in size 315-355 equipped with NU bearing in 4-6-8 poles speed - Standard motors in size 355X-400-450-500-560 equipped with NU bearing in speed 4-6-8 poles as well as PTC+PT100 winding - PT100 bearings and heating resistor 1 x 230V ...

Submersible degreasing aerator The AEROSPEED is a submersible degreasing aerator that produces microbubbles which in turn causes grease to float onto the liquid surface. The unit is easy and simple to operate and install. Robust IP68 cast iron motor, coated with epoxy and equipped with a temperature control sensor Motor specially adapted to the constraints of operating a submerged degreasing aerator according to Europelec standards Stainless steel suction tube Stainless steel frame specially designed to optimize the hydraulic flow Stainless steel propeller specifically designed to ensure simultaneous mixing and suction of air.

"We offer multi-position cast iron motors to provide more flexible mounting solutions to customers. MULTI-POSITION CAST IRON MOTORS (OUR CODE: MF*HU) - Three-phase motors with cast iron housing - IP55 protection - Class F insulation - Heating class B - Multi-position with repositionable feet from size 160 to size 280 - Currently stocked in 2-4-6 poles - IE3/IE4 efficiency - All other options of the classic cage motors remain applicable"

"The high voltage motors can be made of cast iron or welded steel (lighter solution). HIGH VOLTAGE MOTORS WITH CAGE: - Three-phase motors with cast iron cage - High voltage motors between 3 and 13.8kV - Power from 160kW to 10MW - IP55 or IP23 protection - Efficiency IE3/IE4 (tomorrow IE5) - Standard or custom sizes are available for sale - 2-4-6 poles stocked motors up to 1,2MW, IC411 cooling - Customized motors according to your specifications or to replace an existing motor will be delivered to you - Cooling mode IC411-IC416-IC511-IC611-IC616-ICW81 - Ball or sleeve bearings"

"The world is changing and companies are under increasing pressure from environmental policies. An international standard was established in 2008 and updated in 2014 to classify the international energy efficiency (IE) of low-voltage three-phase induction motors. This is the IEC/EN 60034-30.1 standard. It reinforces the balance of international efficiency regulations. At Focquet, we have more and more IE4 motors to meet the needs of our environmentally conscious customers. We continue to invest heavily in this type of motor. STANDARD CAST IRON IE4 MOTORS: - Three-phase motors with cast iron housing - IP55 protection - Class F insulation - Heating class B - Stored in 230/400V - 400/690V or 500V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE4 - Form B3-B5-V1-B14-B35-V15-B34 - Standard motors equipped with PTC sensors from size 132 onwards - ...

"Aluminum motors offer a lighter solution to our customers, compared to a cast iron frame. STANDARD ALUMINUM MOTORS (OUR CODE: MA) - Three-phase motors with aluminum cage - IP55 protection - Class F insulation - Class B heating - Removable feet, which allows the terminal box to be turned to the desired side - Stored in 230/400V - 400/690V - Operating in 50/60hz - Other special voltages or insulation class H on request - Stored speed: 3000 rpm or 1500 rpm or 1000 rpm or 750 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B14-B35-V15-B34 - Motors from size 56 to 160 - These motors can be equipped with options such as special sensors like PTO or PT100 - IP56 option - Standard motors equipped with PTC sensors - These motors can be equipped with options such as special sensors, purge holes, heating resistors, umbrella covers, specific epoxy paint - C3M- C5M - Three-phase forced ventilation (code VF) or single-phase (code VFW).

"IP23 ventilated open motors (ODP) are an ideal solution for our customers who want compact and smaller motors than IP55 motors. In general, these motors have one less frame size. They are mainly used in clean environments (e.g. manufacturing of plastic bottles for soft drinks, cold compressors for food freezing, ...) STANDARD OPEN VENTILATED MOTORS (OUR CODE: MOV) - Three-phase motors with cast iron housing - IP23 protection - Insulation class F - Heating class B - Legs molded in the casing - Stored in 230/400V - 400/690V - Operating in 50/60hz - Cooling IC01 - Other special voltages or insulation class H on request - Stored speed : 3000 rpm or 1500 rpm or 1000 rpm - Efficiency IE3/IE4 (tomorrow IE5) - Form B3-B5-V1-B35-V15 - Standard motors equipped with PTC sensors for all motors - Motors are equipped with an isolated bearing for use with a variable speed drive. The PI will eliminate circulating currents in the rotor. - Provided with two ball bearings

"The world is changing and companies are under increasing pressure from environmental policies. An international standard was established in 2008 and updated in 2014 to classify the international energy efficiency (IE) of low-voltage three-phase induction motors. This is the IEC/EN 60034-30.1 standard. It reinforces the balance of international efficiency regulations. At Focquet, we have more and more IE4 motors to meet the needs of our environmentally conscious customers. We continue to invest heavily in this type of motor. OPEN VENTILATED MOTORS (OUR CODE: MOV) - Three-phase motors with cast iron cage - IP23 protection - Class F insulation - Heating class B - Legs molded in the casing - Stored in 230/400V - 400/690V - Operating in 50/60hz - Cooling IC01 - Other special voltages or insulation class H on request - Stored speed : 3000 rpm or 1500 rpm or 1000 rpm - Efficiency IE4 - Form B3-B5-V1-B35-V15 - Standard motors equipped with PTC sensors for all motors

"Focquet offers three-phase induction motors in cast iron or aluminum housings. The dimensions and power correspond to the values of a standard motor, but have been modified to allow braking applications. The disc brake is supplied with direct or three-phase alternating current by a rectifier located in the motor terminal block. Our solution is always a parking brake. Standard motor size and power rating, aluminum and cast iron chassis."

This forced ventilation series offers a wide voltage range of 400 to 575 Volt three-phase in IP 66 Made in Europe. Forced vent. - Motor optionally available in three versions. Mb 1F for standard forced ventilation with drive motor in aluminium, in IP66, insul. Class F. Mb 1G for all special versions, drive motor in cast iron, IP66. Special versions further available in insul. Class H, IP67, special voltage etc. Mb 1H with UL/CSA certified drive motor in aluminium, IP66, insul. Class F.

Dutch Scrap Recycling B.V. Is the leading trader in Iron, Aluminium, copper, plastic, rubber , Paper, copper cathode scraps in the Netherlands and Continues to Be a Family Business With Four Generations Working to Innovate the Recycling Industry.

Huan-Tai has been a supplier to the aluminum Industry for over 27 years providing dross pans and sow molds to almost every major aluminum producer in our industry. We supply Aluminum dross recycling unit ingot molds dross pans sow molds cooling slat cake black dross.

1, from 10kg- 15 tons 2, Materials: carbon steel, alloy steel, cast iron, cast steel, pig iron, grey iron, ductile cast iron and so on. 3, Has established efficient quality system and obtained international approvals ISO9001, TUV-PED, BV. 4, Produced by experienced technical staff. 5, Production capacity: more than 8,000MT per year. 6, Small orders accepted. 7, Perfect facilities. 8, Advanced machining equipment. 9, Material standards: GB,DIN,EN,NF,ISO,JIS,SS,BS,AISI,SAE,ASTM,UNS,ACI.

The chemical composition data in the table for reference only. 2. The mechanical properties comes from the sample taken from round 1/4 diameter, rectangle & square from 1/4 diagonals. 3. Customized size and grade upon your request

Gray Iron EN-GJL-300

8% lighter than forged steel Machining allowance reduced by 30% 45% reduction in comprehensive cost Tool saving 45%-60% In 1999 Hengong independently developed the first continuous casting line. Compared with other materials, the continuous casting product has fine mic ro-matrix and high yield witho ut internal defect. Currently, Hengong is the major production base of continuous casting iron in Asia. Advantage against forged steel: 8% less weight, 30% less stock allowance, 45% less labor cost, 70% tooling cost.

Material: ASTM, JIS, DIN, BS, such as 65-45-12 Casting part and machined part We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

We focus on quality and consistency. Batch production are always consistent with sample. Our Quality assurance: 1. Non-destructive test (NDT): magnetic particle examination (MPE), ultrasonic examination (UE), liquid penetration examination (LPE), X ray. 2. Experienced inspector on dimensions, CMM dimension testing and other tools. 3. To maintain our reputation, we still have excellent return and claim policy even some rare defects. 4. Our prices are always competitive. 5. Spectrometers to assure the material.

Ductile iron EN-GJS-600-3

Ductile iron EN-GJS-500-7

Ductile iron EN-GJS-400-18

Graphite iron castings Gray iron casting iron pulley Huan-Tai specialize in investment castings, sand castings, die castings, gravity castings in material of carbon steel, alloy steel, cast iron, ductile iron, aluminum, bronze and custom material. Typical products include custom casting parts, trailer parts, agricultural gearbox, gear, gear shaft, CNC machining parts, train parts, wear resistant parts, crusher parts like liner plates, bowl liner, jaw plate, mantle, heavy castings, coal mining machinery parts and aluminum castings & bronze castings etc. We strive to provide the high quality castings with tight tolerance and try to avoid defects delivered to our customers. Our inspection: 1.Metal testing and analysis, mechanical properties, microstructure, spectrometer and furnace chemical composition analysis. 2.Non-destruction inspection: MPE, LPE, UE and RE 3.Dimension inspection: well experienced inspector team 4.Quality control 5.3rd party inspection

PARTS FOR INSTALLATION AND OPERATION ON HYDRAULIC NETWORKS cast iron universal coupling MAIN FEATURES - Body in ductile cast iron EN-GJS 400 - Blue epoxy anti-corrosion coating - Nominal pressure: 16 bar - For all types of pipe (PVC - PE - cast iron - steel) - Complies with standard EN 545 - A.C.S. certified product

A cast—iron paella frying pan with a diameter of 40 cm is a versatile kitchen tool, ideal for cooking various dishes. Resistant to high temperatures, it is ideal for frying, stewing and baking. Cast iron retains and distributes heat evenly, ensuring uniform cooking and giving dishes a rich taste. Sturdy and durable, the frying pan has a non-stick coating provided it is properly maintained, which makes it easy to operate. The aesthetic design allows you to use it not only on the stove, but also in the oven or serving dishes directly on the table.

A cast—iron paella frying pan with a diameter of 36,5 cm is a versatile kitchen tool, ideal for cooking various dishes. Resistant to high temperatures, it is ideal for frying, stewing and baking. Cast iron retains and distributes heat evenly, ensuring uniform cooking and giving dishes a rich taste. Sturdy and durable, the frying pan has a non-stick coating provided it is properly maintained, which makes it easy to operate. The aesthetic design allows you to use it not only on the stove, but also in the oven or serving dishes directly on the table.

Cast iron saj with a diameter of 40 cm is a versatile and durable cookware ideal for cooking over an open fire or in the oven. Due to the thick walls, the saj evenly distributes heat, which allows you to cook meat, fish, vegetables and other ingredients with minimal use of oil. The comfortable handles provide ease of handling, and the non-stick coating simplifies the washing process. The cast-iron saj will be a great addition to your kitchen arsenal, allowing you to enjoy delicious food outdoors or at home.