Buffers - Import export

The preferred field of application for the (gas) hydraulic industrial buffer (COMPENSER®) of the S-series is in the medium to heavy engineering industry sector. As a heavy duty shock absorber it is used in large crane systems (e.g. harbour crane, shipyard crane or container crane), metallurgical plants, rolling mills, loading systems or as end stop integrated in a rail buffer stop. Design & Function: The gas-filled inner tube 2 enters the outer tube 9. The damping medium flows from the pressure chamber 6 through the throttle orifices 8 of the metering tube 7 into the volume balance chamber 5. The separating piston 4 simultaneously moves in the direction of the impact cap 1 and compresses the nitrogen gas filling. In the gas space 3, the energy is stored which is required for the reset of the inner tube. When the inner tube 2 returns to the initial position, the separating piston 4 moves in the opposite direction and presses the damping medium back into the pressure chamber 6.

Gronemeyer Heliflex storage systems store general cargo that is up to 400 mm wide and 160 mm high. The products are transported on a plastic Heliflex chain. The chain is wound around two rotating towers in a spiral. The products are later re-fed into production by operating the system in reverse. The machine works according to the First In-Last Out principle. Technical data: —Chain width: up to 400 mm —Usable chain length: up to 1,000 m —Independent electrical control system Optional equipment: —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

The Gronemeyer FIFO spiral buffer stores general cargo and bulk goods. The products are transported on a plastic mat conveyor chain. The chain is wound around one or two rotating towers in a spiral. The design of the machine permits storing unpackaged food. The machine works according to the First In-First Out principle. Technical data: —Chain width: up to 1,400 mm —Usable chain length: up to 1,000 m —Independent electrical control system Optional equipment —Loading and unloading belts —Insulated module with air conditioning technology for perishable goods

The Texas Instruments OPA2188AIDR Instrumentation Amplifier is a wideband, high-performance amplifier ideal for medical and industrial applications. It features a high Common-Mode-Rejection-Ratio (CMRR) of 120 dB, a low input bias current of 850 pA, an input offset voltage of 25 uV, an operating supply current of 475 uA, and low input voltage noise density of 0.25 nV/sqrt Hz. It also has a wide range of operating temperatures, from -55° C to 125° C, and includes an internal PAs for optimal signal-to-noise ratio. The amplifier also includes a shutdown feature for easy power management. Features of the OPA2188AIDR include: • CMRR: 120 dB • Shutdown: No Shutdown • Input Bias Current: 850 pA • Input Offset Voltage: 25 uV • Operating Supply Current: 475 uA • RoHS Details • Input Voltage Noise Density: 0.25 nV/sqrt Hz • Number of Channels: 2 Channel The OPA2188AIDR can be used in a variety of applications including medical imaging

The FXMA2102UMX is an 8-channel, ultra-low power, voltage translator/buffer/repeater/isolator from ON Semiconductor. It is designed to provide a low-power, low-voltage solution for translating and buffering signals between two different voltage domains. It is ideal for applications such as automotive, industrial, and consumer electronics. Features: • 8-channel, ultra-low power, voltage translator/buffer/repeater/isolator • Low-power, low-voltage solution for translating and buffering signals between two different voltage domains • Supports up to 8V input voltage range • Low-power operation: <1µA typical • High-speed operation: up to 10MHz • High-impedance output: >1MΩ • High-impedance input: >1MΩ • High-voltage isolation: >2.5kV • ESD protection: >8kV Applications: • Automotive • Industrial • Consumer electronics • Battery-powered systems • Portable devices • Wearable devices • Medical devices

Screw on rubber impact buffers can also be used as equipment or machine feet.

Rubber buffers are widely-used construction elements for elastic mounting. They are used, among other things, as mountings for aggregates, motors, compressors, pumps and testing machinery.

The rubber buffers are widely-used construction elements for elastic mounting. They are used, among other things, as mountings for aggregates, motors, compressors, pumps and testing machinery.

Elastomer buffers are characterised by high load capacity, long service life and high economy due to being entirely maintenance-free. They also provide outstanding protection for persons and machines since the buffers do not rupture when overloaded. They are used to insulate and dampen air and structure-borne sound and offer progressive buffering characteristics with sustained excellent performance. They are also resistant to grease and oils and, in terms of performance and quality fulfil the requirements of the standard ISO 10069-1.

The KASAG curd mixer distinguishes itself through its consistent and gentle blending of different ingredients. It comprises a vessel, a co-axial mixing device and customized connections. The base as well as the jacket are cooled and provided with a densely welded insulation jacket. The KASAG curd mixer can be conveyed easily via pallet lifting systems. Buffer container with mixing device for soft cheese The KASAG buffer container for soft cheese has an anchor mixing device with scraper and a pump at the outlet.

Specification of this Liron FSN series high voltage thyristor buffer absorption capacitor film capacitor company Liron is a professional capacitor manufacturer focusing on snap-in, screw terminal, radial type aluminum electrolytic capacitors and film capacitors. Liron owns world-class production equipments which can offer 120,000,000 pcs production output per month for its distinguished clients worldwide. Liron superior capacitor can match low ESR, long lifetime, low resistance, low leak current, High working voltage and more different requirements. FSN series is a high voltage thyristor buffer absorption capacitor film capacitor that matches following SPEC. FSN series high voltage thyristor buffer absorption capacitor film capacitor is suitable for the circuit of high-voltage thyristor and all kinds of high voltage switch, plays a role in buffer absorption, Peak voltage clamp and so on.

In a fruit or vegetable processing line, storage is often required to feed the line, process the various categories of products and smooth out the flows between the different machines as well as in case of stoppage of the production line.Feed hoppers that depend on the Product Product transport mode or the container The production capacity of the line Buffer hoppers with adjustable feed system.

The vibration buffer for pedestal is an accessory allowing the reduction of vibrations and resonances that may be emitted when traveling on the surface of a paved terrace. The shock absorber wedge offers optimal sound insulation of the terrace on pedestal. Manufacturing Made in France, the RINNO PLOTS vibration buffer is made from recycled rubber. Conformity RINNO PLOTS brand "vibration buffer" accessory complies with standards in force DTU 43.1 and 51.4. The vibration buffer is placed directly on the head of the slab pedestal without fixing. Its shape is provided with 4 cutouts to allow the lugs of the slab pedestal to protrude. The shock absorber wedge is 3 mm thick and can also be used to compensate for small differences in height between the pedestals.

The LogTag Glycol Temperature Buffer is specially designed to monitor and control the temperature of vaccines during storage and transportation. The glycon buffer reflects the temperature in a vial of vaccine. With this product, you control that vaccines are not exposed to high or low temperature changes.

The COMPENSER® of the DC-series is an ideal hydraulic shock reducing element especially for the application field of storage technology (storage and retrieval machines). As a doubleacting buffer, this industrial shock absorber can be used in a spacesaving manner due to its design and can be actuated alternately from both sides. The constructive design and function corresponds to the C-Type. Furthermore, due to its low reset force, it can easily be pressed in at creep speed during operation. As optional equipment PU caps as inserts for the impact cap for the reduction of impact noise and a monitoring of the piston rod‘s position (by either magnetic or inductive sensors) are available. If only a slight increase of reset force of the piston rod over the entire stroke is desired, an additional external accumulator can be fitted to the cylinder to increase the gas volume of the gas spring. Hence the reset force decreases in retracted state.

The hydraulic industrial shock absorber of the C-series (COMPENSER®) is the ideal hydraulic buffer for storage and retrieval machines or smaller conveyor systems, crane systems, test stands etc. in light to medium mechanical engineering. Due to its short design, this hydraulic buffer (COMPENSER®) can be used in a spacesaving manner as limitation of the end position (as emergency end stop) in industrial applications. In addition, the low reset force allow operational pushin cycles at creep speed. Design & Function: The piston rod 2 enters the metering tube 3. The damping medium flows from the pressure chamber 6 through the throttle orifices 4 of the metering tube 3 into the volume balance chamber 5. The nitrogen gas between the outer tube 7 and the metering tube 3 is compressed and stores the energy required for the reset of the piston rod. When the piston rod 2 returns to the initial position, the damping medium flows back into the pressure chamber 6.

Housing 1.4308 stainless steel, from size 5 1.4301. Clamping arm 1.4301 stainless steel. Buffer natural rubber. Screw stainless steel A2. Version Housing and lever arm bright. Screw ISO 4017, grade 70, bright. Note Clamping element with integrated highly elastic, shaperetaining natural rubber buffer. Together with a chain tensioner set, sprocket set or a tension pulley, the clamping element makes a readytoinstall tensioning unit suitable for tensioning chain and belt drives. Suitable for both tensioning directions. The clamping elements are maintenancefree and tearoff resistant. The clamping element is fastened to the machine component through a bore. If necessary, a heavyduty dowel pin can be inserted in the positioning notch “P” for torque support.

Dr. Paul Lohmann® offers Sodium Succinate 6-hydrate as powder and solution in food/pharma and chem. pure grade. For biopharmaceutical applications, it is used as a pH buffer in cell culture media. For food applications, it is used as a flavoring agent. For industrial applications, it is used as a stabilizer for electroplating baths, as a nucleating polymer additive and as a crystallization modifier in gypsum production. CAS 6106-21-4 EINECS 205-778-7 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

Increased output for further processing Tool-free format change Quick adjustment to product formats Selectable direction of rotation

The light and mobile coil mat was designed for the storage of coils. It is convenient to use. Thus, makeshift storage can be set up rapidly and flexibly. Alternatively, existing storage can be expanded should bottlenecks arise.

Dr. Paul Lohmann® offers Tripotassium Citrate as powder, free flowing powder, fine powder, crystals in food/pharma/chem. pure grade as well as for food supplements. For pharmaceutical applications, it is used for the treatment of hypokalemia. For food applications, it is used as acid regulator. For industrial applications, it is used as pH buffer, complexer and conductivity enhancer for electrochemical processes. CAS 866-84-2 \ 6100-05-6 EINECS 212-755-5 Dr. Paul Lohmann® carries out product and application development in close cooperation with customers. This includes the adaptation of chemical and physical parameters such as bulk density, wettability, particle size, purity or pH-value.

The secutex buffer pad with hollow profiles and fabric insert act as an effective buffer. The hollow cavity absorbs collision energy and protects the load from damage. The secutex buffer pad comes with a standard yellow and black fabric insert.

This design by LEBENDämpfungstechnik GmbH acts as a hydraulic shock absorber in both, pulling and pushing direction. The energy dissipation of this kind of industrial shock absorber is performed in two ways Working principle As a purely hydraulic variant (TwinStroke®) – in push (compression) direction hydraulically reversible by means of damping medium – in pull (tension) direction hydraulically reversible by means of damping medium The TwinStroke® dampens push and pull forces without an additional functional element. A piston system transmits the push and pull forces gashydraulically to different gas and oil chambers. In this way, any load can be absorbed immediately without idle stroke, socalled “slack”, and with minimal wear. The TwinStroke® can absorb changing loads very well. The smaller size and lower weight is advantageous, as only one element is needed to absorb compression and tension forces.

The LIPP® Large Thermal Storage Tank is a customized solution to effectively store excessive heat from biogas plants, biomass heating plants, solar plants or other heat sources. The carbon steel tanks are fabricated on site with the patented automated LIPP® Welding Technology. The horizontal welding process enables the infinitely variable production of tanks up to 6,000 m³ volume with horizontal welding only. The largevolume, above ground storage tanks are fitted with all necessary safety and operation equipment. Additional, individual components according to client’s specification can be considered. The roof and wall insulation is individually adapted to local conditions. The LIPP® Thermal Storage Tanks operate at atmospheric pressure, at a temperature of up to 95° C and are suitable for use with heating water. Speciality No additional nitrogen system necessary.

Universal stainless steel exhaust system accessories. Everything you need to build your own exhaust system. Holder or lambda probe thread up to the exhaust spring, which are used for slip on exhaust systems.

High volume Single track conveyor belt

Shock reducing elements by LEBENDämpfungstechnik GmbH known as hydrostatic, viscoelastic or elastofluid shock absorbers with an integrated springdamper operating principle. Advantage Use in pulling and pushing direction Small design Very high preload of the shock absorber Individual reset force of the piston rod depending on the application Used as a buffer in Railway couplings Water locks / sluices … Illustrated hydrostatic buffer Damping of the pretensioned rope catch (tensioned catch rope) in front of a water lock

Alternative to the standard we also offer individual solutions: » other colours possible

Display accuracy max. 10 μm. Repeat accuracy max. ±0.01 mm. Lowest-power LCD. Reading distance ≤2 mm. Incremental measurement and reset function. Direct reference/offset value input. Hard-wired sensor.