Universal - Import export

Machining

Manufacturer of metal shop fitting shelving systems and displays

HANSAPLAST UNIVERSAL - 1 M x 6 CM

U-E10 The U-E10 leveller is a 1 mm clover-shaped shim. Placed on the Buzon pedestal, it stabilises the paver, provides additional acoustic values, and because it can be split, it compensates for variations in paver thickness.

PB-TABS-3MM PB-TABS-3MM, 3 mm thick and 17 mm high, is fixed by pressure on the BUZON pedestals from the PB range. The spacer tabs regulate the spacing between the pavers, ensures alignment, and free water drainage. The format (3 mm x 17 mm), is intended more particularly for the laying of thick ceramic pavers (minimum 20 mm). Several layers available.

PB-KIT-5 The PB-KIT-5 support for joists is fixed in place by pressing on the BUZON pedestals from the PB range. It effectively secures the joist to the pedestal, for wooden or composite decking.

PB-END The Buzon PB-END Finishing Kit wraps the edge of the space created beneath the deck installed on pedestals from the PB range. Two blades with claws encircle the 20 mm-thick plinth.

DPH-TABS-3MM-H17 DPH-TABS-3MM-H17, 3 mm thick and 17 mm high, is fixed by pressure on the BUZON pedestals from the DPH range. The spacer tabs regulate the spacing between the pavers, ensures alignment, and free water drainage. The format (3 mm x 17 mm), is intended more particularly for the laying of thick ceramic pavers (minimum 20 mm). Several layers available

DPH-END The Buzon DPH-END Finishing Kit wraps the edge of the space created beneath the deck installed on pedestals from the DPH range. Two blades with claws encircle the 20 mm-thick plinth.

BC-TAB-C-2MM-H17 The circular spacer tabs, BC-TAB-C-2MM-H17, 2 mm thick and 17 mm high, are fixed by pressure on the BUZON pedestals of the BC range. The spacer tabs regulate the spacing between the pavers, ensure alignment, and free water drainage. These are circular and adapt perfectly to all forms of paver and allow the installation of terraces with geometric patterns. The format (2 mm x 17 mm), especially for the laying of thick pavers (minimum 20 mm) with standard dimensions (minimum 40 cm). Different layers available.

BC-KIT-1 The BC-KIT-1 support for joists is fixed in place using our plug-in system on the BUZON pedestals from the BC range with slope corrector. Adjustable in width, it firmly holds the joists supporting the deck boards.

BC-KIT-2 The BC-KIT-2 support for joists is fixed in place using our plug-in system on the BUZON pedestals from the BC range. Adjustable in width, it firmly holds the joists supporting the deck boards.

U-PH5 The U-PH5 slope corrector is an adjustable unit to be placed under the base of BUZON pedestals. It controls slopes measured with the U-KIT-SL80 spirit level. A horizontal or inclined terrace can be obtained upon request. Advantages: → The Locking key, fixed in the center of the slope corrector, makes it possible to maintain the adjustment of the value of the slope. → The Key foot allows to keep the orientation of the U-PH5 when adjusting the height of the pedestal.

U-KIT-SL80 The BUZON U-KIT-SL80 bubble level is the essential tool if using the Buzon slope correction system. It measures the value and direction of the slope in any location where a Buzon pedestal will be located This information is essential for the use of our correction systems and slope control.

U-Wall New The U-Wall is an accessory that can be attached to all ranges of Buzon® Pedestal. It creates a uniform 5 mm (or greater) gap between the paver and the wall, enabling water flow which protects the terrace in the case of heavy rainfall, snow ... Advantages: → With its flexible tile retainers, the U-WALL can be installed on terraces of any shape: angular, curved etc, which makes installation easier and more efficient. → The U-WALL can be fixed to the pedestal with screws to keep the paving in position It is also adjustable on top of the pedestal, which allows for an optimal gap depending on the configuration of the terrace.

DPH-KIT-3 The DPH-KIT-3 support for joists is fixed in place using our plug-in system on the BUZON pedestals from the DPH range. It firmly holds the joists supporting the deck boards.

U-PAD-6MM The U-PAD-6MM protective pad is made of recycled rubber. The 200 x 200 x 6 mm format, when placed under the pedestal, protects the roof if required. It can also be used to raise the pedestal by 6mm, and it provides an additional comfort.

BC-TAB-R-2MM-H17 The rectangular spacer tabs, BC-TAB-R-2MM-H17, 2 mm thick and 17 mm high, are fixed by pressure on the BUZON pedestals of the BC range. The spacer tabs regulate the spacing between the pavers, ensure alignment, and free water drainage. The format (2 mm x 17 mm), especially for the laying of thick pavers (minimum 20 mm) with standard dimensions (minimum 40 cm). Several layers available.

DPH-KIT-5 New The DPH-KIT-5 joist cradle attaches to the head of the DPH range of pedestals. It firmly secures the joist to the pedestal for the installation of timber or composite terraces. Advantages: → It can be used with various sizes of joist in both timber and composite. The kit can accommodate joists with a minimum depth of 30 mm and a maximum width of 90 mm. → The DPH-KIT-5 rotates to allow adjustment of the joist to the required direction once the pedestal has been adjusted to the correct height. The DPH-Kit 5 is compatible with all of the DPH range and the PB-0-S18.

TECHNICAL SPRAYS TSP 110primer light grey 400ml TSP 120primer grey 400ml TSP 130primer dark grey 400ml TSP 140primer white 400ml

Highaccuracy universal load cells, easy to install. Overload protection in tension and compression (only for 2712A and 2712C) o Compact design Also available as standard reference load cells according to ISO 376 (classes "1", ''0,5'' and ''00'' see specific data sheet 2712ISO)

Accuracy universal load cells, easy to install.

Universal tension and compression load cells for industrial force measurement. Flat design o High stiffness and fatigue resistant o Highly resistant to transverse forces Complete range of mounting accessories available Material stainless steel (2960)**, anodised aluminium alloy (2962), alloy steel (2965)

UNIVERSAL GEAR 80W90 is suitable for all mechanical gear boxes and differentials which require the extreme pressure performances API GL4 or GL5 SAE 80W90. ADVANTAGES: Good anti-wear and extreme pressure properties. Compatibility with non ferrous metals. Good anti-corrosion and anti-foaming properties. Thermal stability and large resistance to oxidation. Multifunctional.

white frame / nitril - sterilizable 130°C Suited for use in FOOD Industry - sterilizable 130°C ! Art. 164518: 45cm Art. 165515: 55cm Art. 167519: 75cm