Results for
BUZON PEDESTAL INTERNATIONAL S.A
Belgium
U-E10 The U-E10 leveller is a 1 mm clover-shaped shim. Placed on the Buzon pedestal, it stabilises the paver, provides additional acoustic values, and because it can be split, it compensates for variations in paver thickness.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
PB-TABS-3MM PB-TABS-3MM, 3 mm thick and 17 mm high, is fixed by pressure on the BUZON pedestals from the PB range. The spacer tabs regulate the spacing between the pavers, ensures alignment, and free water drainage. The format (3 mm x 17 mm), is intended more particularly for the laying of thick ceramic pavers (minimum 20 mm). Several layers available.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
PB-KIT-5 The PB-KIT-5 support for joists is fixed in place by pressing on the BUZON pedestals from the PB range. It effectively secures the joist to the pedestal, for wooden or composite decking.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
PB-END The Buzon PB-END Finishing Kit wraps the edge of the space created beneath the deck installed on pedestals from the PB range. Two blades with claws encircle the 20 mm-thick plinth.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
DPH-TABS-3MM-H17 DPH-TABS-3MM-H17, 3 mm thick and 17 mm high, is fixed by pressure on the BUZON pedestals from the DPH range. The spacer tabs regulate the spacing between the pavers, ensures alignment, and free water drainage. The format (3 mm x 17 mm), is intended more particularly for the laying of thick ceramic pavers (minimum 20 mm). Several layers available
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
DPH-END The Buzon DPH-END Finishing Kit wraps the edge of the space created beneath the deck installed on pedestals from the DPH range. Two blades with claws encircle the 20 mm-thick plinth.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
BC-TAB-C-2MM-H17 The circular spacer tabs, BC-TAB-C-2MM-H17, 2 mm thick and 17 mm high, are fixed by pressure on the BUZON pedestals of the BC range. The spacer tabs regulate the spacing between the pavers, ensure alignment, and free water drainage. These are circular and adapt perfectly to all forms of paver and allow the installation of terraces with geometric patterns. The format (2 mm x 17 mm), especially for the laying of thick pavers (minimum 20 mm) with standard dimensions (minimum 40 cm). Different layers available.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
BC-KIT-1 The BC-KIT-1 support for joists is fixed in place using our plug-in system on the BUZON pedestals from the BC range with slope corrector. Adjustable in width, it firmly holds the joists supporting the deck boards.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
BC-KIT-2 The BC-KIT-2 support for joists is fixed in place using our plug-in system on the BUZON pedestals from the BC range. Adjustable in width, it firmly holds the joists supporting the deck boards.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
U-PH5 The U-PH5 slope corrector is an adjustable unit to be placed under the base of BUZON pedestals. It controls slopes measured with the U-KIT-SL80 spirit level. A horizontal or inclined terrace can be obtained upon request. Advantages: → The Locking key, fixed in the center of the slope corrector, makes it possible to maintain the adjustment of the value of the slope. → The Key foot allows to keep the orientation of the U-PH5 when adjusting the height of the pedestal.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
U-KIT-SL80 The BUZON U-KIT-SL80 bubble level is the essential tool if using the Buzon slope correction system. It measures the value and direction of the slope in any location where a Buzon pedestal will be located This information is essential for the use of our correction systems and slope control.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
U-Wall New The U-Wall is an accessory that can be attached to all ranges of Buzon® Pedestal. It creates a uniform 5 mm (or greater) gap between the paver and the wall, enabling water flow which protects the terrace in the case of heavy rainfall, snow ... Advantages: → With its flexible tile retainers, the U-WALL can be installed on terraces of any shape: angular, curved etc, which makes installation easier and more efficient. → The U-WALL can be fixed to the pedestal with screws to keep the paving in position It is also adjustable on top of the pedestal, which allows for an optimal gap depending on the configuration of the terrace.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
DPH-KIT-3 The DPH-KIT-3 support for joists is fixed in place using our plug-in system on the BUZON pedestals from the DPH range. It firmly holds the joists supporting the deck boards.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
U-PAD-6MM The U-PAD-6MM protective pad is made of recycled rubber. The 200 x 200 x 6 mm format, when placed under the pedestal, protects the roof if required. It can also be used to raise the pedestal by 6mm, and it provides an additional comfort.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
U-Edge New The U-EDGE is an adaptable edge support that can be used with all ranges of Buzon® pedestals. Due to its design it creates a quick and easy solution to complete the installation at the edge of a terrace. It can be used with any size of spacer tab and all shapes of paving. The U-Edge is an accessory allowing installation of small cuts of paving (from 2 cm upwards) around the perimeter. The small cuts are supported by the U-Edge, which can be screwed in place on the head of the pedestal providing a solid solution. Advantages: →The U-Edge creates a space between the paving slab and wall keeping an even gap and enabling water flow which protects the terrace in the case of heavy rainfall, snow etc. → With its flexible tile retainers, the U-Edge can be installed on terraces of any shape: angular, curved etc. which makes installation easier and more efficient. →It is also possible to remove the tile retainers to adapt the U-Edge to work with all types of terrace layout.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
BC-TAB-R-2MM-H17 The rectangular spacer tabs, BC-TAB-R-2MM-H17, 2 mm thick and 17 mm high, are fixed by pressure on the BUZON pedestals of the BC range. The spacer tabs regulate the spacing between the pavers, ensure alignment, and free water drainage. The format (2 mm x 17 mm), especially for the laying of thick pavers (minimum 20 mm) with standard dimensions (minimum 40 cm). Several layers available.
Request for a quoteBUZON PEDESTAL INTERNATIONAL S.A
Belgium
DPH-KIT-5 New The DPH-KIT-5 joist cradle attaches to the head of the DPH range of pedestals. It firmly secures the joist to the pedestal for the installation of timber or composite terraces. Advantages: → It can be used with various sizes of joist in both timber and composite. The kit can accommodate joists with a minimum depth of 30 mm and a maximum width of 90 mm. → The DPH-KIT-5 rotates to allow adjustment of the joist to the required direction once the pedestal has been adjusted to the correct height. The DPH-Kit 5 is compatible with all of the DPH range and the PB-0-S18.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RITTAL
Belgium
The socket strips are available in various country-specific varitants with different functional elements. Special attention has been devoted to practical, universal fastening: Variable attachment facilities have been created with an angle bracket which may be inserted in four positions. Hence, for example, the 482 mm long socket strip may optionally be mounted on 482.6 mm (19") mounting angles, the 482.6 mm (19") mounting frame, on the enclosure frame, or in the rear section of the wall-mounted distributor. Without additional mounting accessories, the socket strip may be inserted into all sections with a 25 mm hole pattern. This makes selection much easier, as well as providing additional flexibility and saving on warehousing. Provision has also been made for cable routing of the infeed, and when mounting in the 482.6 mm (19") section there is adequate space to route the infeed between the socket strip and the profile rail without kinks.
Request for a quoteResults for
Universal - Import exportNumber of results
21 ProductsCompany type
Category