Results for
SDT ULTRASOUND SOLUTIONS
Belgium
Find Air Leaks. Decrease Energy Consumption. Maximize Uptime. Compressed air is the most versatile and therefore widely used resource in industry. Using atmospheric pressure to transfer energy during industrial processes, compressed air can be found powering air tools like drills and hammers, hydraulic air cylinders for automation in manufacturing processes and much more. Compressed air is also used to power air brakes on mobile fleets and trains. Air Compressor Expenses It is so commonly found in industry it is often referred to as the fourth utility to electricity, water and gas. Of the four, compressed air consumes the most energy. Air compressor systems can differ very greatly in size, output and cost. What remains constant, is the initial investment in a compressor system is only 25% of the expenses associated with it, over its lifetime. The other 75% of the costs go to energy used to compress the air.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Peace of mind and reassurance for the operator Tightness Testing on Underground Storage Tanks and other Air Tight Compartments The ability to test for tightness with an ultrasound detector is extremely powerful and versatile. It is the only way to ensure that underground storage tanks are air tight. But that isn’t all that ultrasonic tightness testing can be used on. There are many things that need to be air tight. Like the engine or cabin of a car, large shipping containers or the bearing housing in a paper production plant. When somethings tightness integrity deteriorates one or two things can happen. Things can leak out, or things can get in. And whenever possible, it is advantageous to avoid either of these from happening. Fuel Leaking From Underground Storage Tanks Damage the Environment and Waste Valuable Resources Overtime the tightness integrity of underground storage tanks or other air tight compartments can deteriorate.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Non-rotating asset components seldom receive the routine surveillance they need Hydraulic systems represent another way industry converts electricity to mechanical energy. A pump, normally powered by an electric motor, moves hydraulic fluid through a system. The system is typically made up of a reservoir to hold the hydraulic fluid, high pressure lines to carry the fluid, control valves that ensure the fluid is sent where needed, relief valves for safety, and cylinders to produce mechanical energy. The pump and motor receive attention while the balance of the system is run-to-failure. Ultrasound testing could change this lackadaisical approach; especially considering its versatility, ease of use, and applicability to most hydraulic defects. External and Internal Leaks External leaks can often be found by visual inspection. Some external leaks, like a ruptured hose or fitting, are easy to spot. Simply follow the trail of spilled oil. Others are not so obvious.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
SDT ULTRAChecker is an ultrasound solution designed to use the full range of both airborne and structure-borne 2nd generation ultrasound sensors. Versatile The SDT ULTRAChecker covers all airborne and structure-borne ultrasound applications. Connect any SDT 2nd generation ultrasound sensor. ULTRAChecker delivers end-to-end reliability through the 8 application pillars of ultrasound. Simple ULTRAChecker is the easiest to use detector we’ve ever created. Every push on its simple, 4-button keypad is displayed on its clear, colour display. Increase or decrease signal amplification while maintaining safe listening levels through volume-controlled headphones. Affordable Air leaks, over-greased bearings, failed steam traps, electrical faults, passing valves, the ULTRAChecker finds them all. Built with SDT quality, it’s offered at a price that will leave you speechless.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Safely Inspect Electrical Systems with Ultrasound Electrical failures pose a tremendous safety threat and have the ability to shut down operations entirely Industrial plants require a lot of power to operate, and much like the machinery required for production, their electrical systems can also fail. The Importance of Maintaining your Electrical Systems The implications of a total electrical system failure are far more severe than that of an ordinary mechanical failure. They have the potential to damage equipment, cut power flow and cause downtime for days, seriously injure or kill workers in the immediate vicinity and even impact the surrounding areas power grid. Faults in electrical systems can be detected at their earliest stages with regular ultrasound inspection and therefor prevented far before anything catastrophic happens.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Keep Your Steam Clean, Safe And Energy-Efficient Steam is an essential resource is many industrial processes. As a result most facilities have a vast network of piping, valves, flanges and steam traps. Within these systems there exists constant flow and turbulence. As pure steam travels from your boilers to their point of use, some cooling is inevitable. The result is accumulated condensate and gases. Steam traps purge this waste and keep your system pure. A fully-functional steam trap opens, closes or modulates automatically. It discharges condensate once formed, unless the heat from the condensate can be used. It is energy-efficient and does not waste quality steam. It removes impurities from the live steam, and maintains purity and efficiency throughout the system. Steam Trap Failure Causes Losses to Product Quality, Safety and Energy Loss Steam traps are necessary for the overall efficiency of heat energy transfer.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Extend your inspection capabilities with ultrasound sensors and Improve Leak Detection And Tightness Testing
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
The Flexible Sensor is designed to make airborne ultrasound detection as easy as possible. This sensor is mounted to the end of a flexible, metal tube. Compatible with both the SDT270 and the SDT200, the Flexible Sensor bends, allowing you to shape the tube to fit your needs.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Reducing your energy costs is a difficult challenge faced by many industries in today’s economy. But, it doesn’t have to be. Undetected air or steam leaks, bearing failures and electrical panel faults cost you real money. There’s a way to cut these extra expenses from your energy bill. Preserve the health of your assets with the SDT200 ultrasound detector. Hear air leaks, trend and monitor the condition of your bearings, safely inspect electrical panels and schedule repairs on your own terms, long before they shut you down – all with ultrasound technology.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Downtime is a constant threat to your assets It’s a fact: All machines can fail. You need a solution that helps predict those failures early. Schedule your maintenance tasks on your terms. Let SDT help you take back control of your assets. Whether it’s in the form of equipment failures, unplanned production downtime or costly, last-minute repairs, you need a device that helps you maximize uptime, minimize costs and maintain control of your assets. The SDT270 ultrasound detector provides greater insight into the health of your assets. It helps you control energy costs, predict failures, improve product quality and increase overall production uptime. With your SDT ultrasound solution, you have the ability to predict and prevent failures before they occur. Stop relying on the reactive, fire-fighting maintenance measures of the past and start a proactive approach.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Detect, Trend, and Analyze Ultrasound and Vibration. Detect, trend, and analyze asset health by viewing the ultrasound and vibration time signal and spectrum directly on the SDT340. A reliable asset delivers its engineered value when it is most needed. And while the responsibility for reliability belongs to everyone, it is the maintenance team who is called upon first, when things go wrong. For this reason, the SDT340 connects maintenance to reliability in ways we never imagined possible. Manage the results and organize your condition monitoring strategy by uploading them to the Ultranalysis® Suite 3 software (UAS3). Control any combination of assets and tasks thanks to its flexibility. SDT340 keeps inspectors connected to their assets. Live timewave and spectral views allow inspectors to perform in-the-field diagnosis and analysis, a job previously performed in the office.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
ULTRASense is a compact, airborne ultrasound sensor that connects directly to specific SDT instruments via a direct coupled LEMO7 input. It’s primary design and function is to detect sources of airborne ultrasound including positive and negative pressure leaks, electrical partial discharge, mechanical defects in belt drives, chain drives, and direct coupled shafts. ULTRASense detects signals generated by T-Sonic1 and T-Sonic9 ultrasound transmitters and is therefore applicable to tightness inspections.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
With the SDT340 or the ULTRAChecker, the AIRSense can be used for close and mid-range airborne ultrasound and is compatible with the precision indicator set as well as the Extended Distance Sensor. AIRSense is an optional accessory for both ultrasound devices. This new sensor adds a mid-range solution for airborne ultrasound detection for both the SDT340 and ULTRAChecker (FLEX2 for short range and ParaDish2 for long range with SDT340 only). The AIRSense detection range varies from 0-20 feet/0-6 meters and up to 50 feet/15 meters when the EDS cone is attached.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Raising Performance Standards with the CRYSOUND Acoustic Imager Experience next-level industrial inspections with the next generation of the CRYSOUND Acoustic Imager: leading the way in reliable technology for leak detection, real-time electrical discharge analysis, and thorough mechanical fault diagnosis. Precision at Its Best 200 MEMS Sensors The CRY8120 Series utilizes a 200-channel MEMS microphone array, providing unmatched accuracy in detecting gas leaks, electrical discharges, and mechanical faults from greater distances. See More with Thermal Integration Optional Thermal Camera Module Enhance your inspections with the attachable thermal camera module. Integrate infrared data with acoustic imaging for a comprehensive, multidimensional view of your inspection area. Tailored to Your Workflow Create custom templates and widgets, including PRPD spectrograms, time domain charts, and thermal images.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Unlock a new era of industrial maintenance with the CRYSOUND Acoustic Imager. Our portable condition monitoring solution is designed to deliver unparalleled accuracy and adaptability in detecting compressed air leaks and partial discharges in the most challenging environments. The CRY2624 is certified with an explosion-proof level II 3G Ex ic IIC T5 Gc rating. It’s your trusted companion in chemical plants housing hazardous flammable gases and areas with strict explosion protection requirements. Our ultrasound camera features 128 state-of-the-art MEMS sensors, ensuring ultra-sensitive detection of compressed air leaks. It covers distances of up to 120 meters and displays the exact defect distance on the camera screen. The CRYSOUND Range caters to all your needs, offering solutions from basic (CRY2620) to superior (CRY2623), including the ATEX-certified CRY2624. User-friendly with just two parameters for most tests, it supports camera mode, video mode, and on-site data recording.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
9 transducers Remote control Adjustable volume Uses 6 AA batteries
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
LUBExpert is a solution engineered to help grease bearings right. Strategy driven with artificial intelligence gathered from greasing tens of thousands of bearings, LUBExpert is a condition-based solution that thinks with you and thinks for you.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
SDT ULTRASOUND SOLUTIONS
Belgium
Why we Lubricate Bearings For 4000 years we have been lubricating our machinery and rotating assets to increase their efficiency, reliability and lifespan. Proper bearing lubrication minimizes the surface contact of machinery, reducing undesired friction, excessive heat, metal-on-metal contact and wear and tear. Lubrication not only protects ball and roller-element bearings from themselves by reducing friction but also from corrosion and the elements. Grease is the lubrication of choice within the industry, as it is easy to apply and it provides the bearing housing with a protective seal from the elements. For a procedure proven reliable for the past 4 millennia, it is surprising to hear so many premature bearing failures are lubrication-related. Improper lube selection, amount, intervals as well as lubricant contamination and degradation are to blame.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Detecting mechanical faults before they stop production Bearing and Machine Maintenance Industry runs on machinery. Bearings, pumps, electric motors, compressors, presses, gearboxes and much more. All of which can break unexpectedly, causing production to stop. When production stops your organization loses money. Few bearings make it to the end of their engineered lifecycle. This is due to poor workmanship, bad lubrication practices and neglect. Problems can even arise right after installation due poor installment of the machine. No two machines are the same. Across industry, machines operate under different loads, climates and conditions, making their maintenance requirements unpredictable. Many machines are still maintained on calendar based PM’s, while others are run-to-failure. Both strategies are wasteful.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Equipped with one directional ultrasonic transducer Uses 2 AA batteries Generates two commutating ultrasonic frequencies
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
SDT was the first to pioneer on ultrasound-based hatch cover weathertightness testing on board of ships back in the late 1980s. Together with MacGregor, Lloyds Register of Shipping and IMCS, SDT was able to put ultrasound testing of hatch covers on the world map and make it the preferred method for testing hatch covers by charterers, shippers, P&I insurers and stakeholders in the marine industry. Another first position for SDT is that further development of the tightness testing equipment resulted in SDT launching the world’s first Class type approved and bespoke SHERLOG product range in 2000. Ever since, the SDT SHERLOG equipment became a symbol of reliable and professional hatch cover testing. As no solution is complete without training, SDT & IMCS developed the first and only training course for ultrasound testing of hatch covers in line with the IACS UR Z17 criteria.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
The ParaDish2 works with the SDT270 and the SDT200. It makes long-distance ultrasonic detection possible, allowing you to hear ultrasound waves from more than 300 feet/91 meters away. It’s equipped with an optical viewfinder and integrated laser pointer.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
When you want precise ultrasound data for your permanent mounted machinery, pair the RS Threaded Sensor with your ultrasound solution.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
To accurately measure structure-borne ultrasound waves, choose the RS Needle Contact Sensor. Available in three lengths, the sensor helps you hear and collect data when monitoring bearings and equipment in your facility.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Online4US is a multi-channel online monitoring solution that combines both ultrasound and vibration sensors in 4 to 32 channel modular configurations. It answers a necessary demand to have advanced warning of critical asset failure in remote areas. Online4US is designed to provide Reliability teams with continuous feedback about the health of their factory’s most critical assets. It combines data from two of the most relevant asset condition monitoring disciplines (Ut/Vib) to provide advanced insight about potential machine failures. SDT envisioned a need to permanently monitor the condition of critical assets in inaccessible, dangerous, or remote areas. The versatility of Online4US lends its deployment for identifying early stage machine faults before they become catastrophic events. Online4US is designed to remotely identify these defects Bearing condition monitoring Low speed rotating machine defects On-condition acoustic lubrication
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
The LUBExpert ON-GUARD, our smartest lubrication solution, blends automation with precision, reliability, simplicity, and safety. It ensures long-lasting, trouble-free operation of your rotating assets by maintaining optimal lubrication, all through innovative ultrasound measurement technology. Reliability through Condition-Based Lubrication As much as 80% of bearing failures are attributed to poor lubrication practices. The LUBExpert ON-GUARD eliminates the guesswork from this crucial maintenance task by ultrasonically monitoring the friction levels of rotating equipment, and applying lubrication precisely as needed. Rely on data-driven decisions with the LUBExpert ON-GUARD. Move beyond time-based calculations and embrace a maintenance strategy where precision and accuracy are paramount. This failureless approach acts as a nutritionist for your machines, preventing problems through a personalized, autonomous, and data-driven plan, thereby fortifying operations reliability.
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
Poor greasing practices are a leading cause of bearing failure. Less than 40% of bearings will last long enough to deliver their engineered value and over or under lubrication is most often to blame. Many lube departments re-grease on a wasteful calendar-based schedule. This leads to over and under greased bearings that fail to deliver their engineered value. Grease reduces friction in bearings. Less friction means longer life. LUBExpert alerts you when friction levels increase, guides you during re-lubrication, and prevents over and under lubrication. LUBExpert is an ultrasound solution that helps you Grease Bearings Right. Use the right lubricant at the right location using the right intervals and the right quantities while receiving the right indication of a task well done including bearing status. The LUBExpert is a complete ultrasound solution to manage your acoustic lubrication program and ensure you GREASE BEARINGS RIGHT
Request for a quoteSDT ULTRASOUND SOLUTIONS
Belgium
CONMONSense delivers precise, repeatable data about the health of your assets and electrical systems also in the most challenging environment. Its resonant piezo element is optimized for ultrasound driven lubrication, mechanical fault detection, and monitoring the health of valves, steam, hydraulic systems and electrical defects. Ultrasound is a true measure of the FITness of your facility. Most assets produce FRICTION, IMPACTING, and TURBULENCE as defect indicators. CONMONSense hears these phenomena at their inception and delivers an analog signal response to your connected measurement system. With an output range from 4-20mA or from 0-10V, CONMONSense mounts permanently to any asset to provide continuous condition monitoring data. Avoid unplanned downtime and put the safety of your plant and colleagues first.
Request for a quoteResults for
Ultrasound - Import exportNumber of results
29 ProductsCountries
Company type