Results for
SDT ULTRASOUND SOLUTIONS
Belgium
Find Air Leaks. Decrease Energy Consumption. Maximize Uptime. Compressed air is the most versatile and therefore widely used resource in industry. Using atmospheric pressure to transfer energy during industrial processes, compressed air can be found powering air tools like drills and hammers, hydraulic air cylinders for automation in manufacturing processes and much more. Compressed air is also used to power air brakes on mobile fleets and trains. Air Compressor Expenses It is so commonly found in industry it is often referred to as the fourth utility to electricity, water and gas. Of the four, compressed air consumes the most energy. Air compressor systems can differ very greatly in size, output and cost. What remains constant, is the initial investment in a compressor system is only 25% of the expenses associated with it, over its lifetime. The other 75% of the costs go to energy used to compress the air.
Request for a quoteEUROPEM
Belgium
Air assisted flares enable the smokeless combustion of low pressure waste gases. Air (or Gas) assisted flares can be used when no steam is available on site. Air assisted flares use forced draft Air or Gas to create turbulence ensuring that sufficient primary combustion air is supplied to the flame. The amount of air and hence the size of the tip and riser depend on the degree of smokeless operation required and the maximum flow for smokeless operation. Key features Proprietary design to maximize the mixing of waste gas and air streams and to create turbulence in the combustion zone. Variable speed fans, to supply the optimal amount of Air (Gas) Use of wind deflectors if required, to prevent flame impingement Flame holders around the periphery of the flare tip to ensure stable operation. Use of high grade alloys to enhance lifetime of the flare tip. The use of combustion/mixing air to cool the flare tip and thus enhance its lifetime Key advantages Smokeless operation under a wide range of operating conditions Smokeless flaring of high molecular weight gases Air cooling of the flare tip, resulting in longer lifetime and lower operation and maintenance costs Reduced radiant heat for a given capacity Applications Upstream oil & gas sector Chemical and petrochemical industries including refineries Tank farms and terminals Pipeline transport LNG and NG terminals and compressor stations
Request for a quoteEUROPEM
Belgium
A SRU incinerator is an oxidation-reduction reactor for the recovery of elemental Sulphur from H2S rich waste gases. The first stage of the so called Claus process, is the complete free flame oxidisation of typically 1/3 of the H2S to SO2 in a reaction furnace (H2S + 1½ O SO2 + H2O). The SO2 and the then remaining H2S undergo the Claus reaction both in the reaction furnace and in a series of catalytic reactors (2 H2S + SO2 3S + 2 H2O) resulting in the overall chemical reaction H2S + ½ O H2 + S. Key Features One combustion chamber with mixing wall Part of the waste containing H2S is injected through the burner, the remainder before the mixing wall. The burner is a robust Multifuel design suitable for the combined combustion of different waste gas and gaseous or liquid support fuel streams. The mixing wall ensure the waste and combustion gases combine and also ensures a uniform temperature profile to improve the overall efficiency of the reaction. Key Advantages - Sulphur recovery – Ultra-low NOx combustion possible – Complete oxidisation of all hydrocarbons – No CO formation – Complete odour destruction – Destruction efficiency over 99.99% – For waste air/gas streams containing a high percentage of H2S
Request for a quoteEUROPEM
Belgium
The Tulip Vortex burner was developed specifically for (temperature controlled) combustors for the treatment of lean waste gases and vapours. It employs the same design philosophy as the Ultra-low NOx Tulip Vortex burners but is designed for the combustion of lean waste gases, whilst minimizing support fuel requirements. The burner creates an intense gas recirculation zone near the burner to ensure that waste gas, flue gas and combustion air are mixed. The resulting moderate flame temperature minimizes NOx formation. The homogeneous temperature profile and swirl result in complete oxidation and low CO emissions.
Request for a quoteEUROPEM
Belgium
Most of the Europem incinerators are equipped with waste heat recovery systems. Europem has supplied a wide range of waste heat recovery installations including steam boilers, thermal oil boilers, gas-liquid heat exchangers, gas-gas heat exchangers, bath heaters and air heaters. All waste heat recovery installations are tailored to the needs of the client and the optimal design of the overall installation. Our range of waste heat recovery systems include: -Fired tube boilers with or without economizer. Single pass and multi-pass systems can be supplied Boilers can be equipped with an on-line cleaning system to allow operation with dust-loaded (flue) gases Boilers up to 30 MW capacity can be supplied with pressures ranging from 10 to 22 bar. - Single pass and multi-pass systems can be supplied -Water tube boiler boilers with or without economizer Superheated or saturated steam Horizontal or vertical boiler arrangements Bundles in refractory lined casing or with membrane walls Capacities up to 40 MWth with pressures ranging from 15 to 65 bar. – Thermal oil boilers – Bath heat exchangers – Air – flue gas tube and shell heat exchangers – Flue gas – liquid tube and shell heat exchangers – Air heaters Heat exchangers can be manufactured in carbon steel or high grade alloys e.g. Duplex, Hasteloy, Inconel, AISI 316, AISI 304.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EUROPEM
Belgium
Ground flares can be either natural draft or forced draft, with or without temperature control and can be equipped with a single burner or with multiple burner arrangements: EP-PF Pipe Flare EP-EAS External Assist Steam EP-IAS Internal Assists Steam EP-EAS/IAS External/Internal Assist Steam EP-AA Air Assist EP-GA Gas Assist EP-CAA Compressed Air Assist EP-HP-PF High Pressure Pipe Flare EP-HP-MAS High Pressure Multi Arm Sonic EP-MP Multi Point EP-BP Burn Pit Special tailor made Flare Tips can be offered for specific applications. Europem Venturi Flame Shield (VFS) Europem has developed the proprietary Venturi Flame Shield giving double protection against flame lick. The VFS also pushes air up towards tip exit, leading to an enhanced and more stable combustion process. The VFS can be integrated into most Europem Flare Tips but is particularly suitable for H2S flares, ammonia flares, hydrocarbon flares and lean waste gas flares.
Request for a quoteEUROPEM
Belgium
Europem can supply complete flare systems as well as Flare Tips on their own for replacement or upgrade and refurbishment projects. The following standard Flare Tips are available: EP-PF Pipe Flare EP-EAS External Assist Steam EP-IAS Internal Assists Steam EP-EAS/IAS External/Internal Assist Steam EP-AA Air Assist EP-GA Gas Assist EP-CAA Compressed Air Assist EP-HP-PF High Pressure Pipe Flare EP-HP-MAS High Pressure Multi Arm Sonic EP-MP Multi Point EP-BP Burn Pit Special tailor made Flare Tips can be offered for specific applications. Europem Venturi Flame Shield (VFS) Europem has developed the proprietary Venturi Flame Shield giving double protection against flame lick. The VFS also pushes air up towards tip exit, leading to an enhanced and more stable combustion process. The VFS can be integrated into most Europem Flare Tips but is particularly suitable for H2S flares, ammonia flares, hydrocarbon flares and lean waste gas flares.
Request for a quoteEUROPEM
Belgium
Utility Flares (Pipe Flares) are the most basic flare design available, to provide a robust, reliable and flexible solution for the flaring of large volumes of low pressure waste gas when smokeless operation is either not required or can be achieved without an assisting medium (like steam, air or gas). Reliable operation at both full load and partial load is possible. Key features Flame holders fitted on the periphery of the flare tip ensure stable operation. These flame holders provide a zone of recirculated flue gases, which prevent flame lift off, from the flare tip. Wind deflectors to prevent flame impingement, which prevent a low pressure zone, downwind of the tip. Pilot burner arrangement to further stabilise the flame. Use of high grade alloys to enhance lifetime of the flare tip Use of dynamic seal to reduce purge gas requirements and prevent flash back. Key advantages Low investment and operational costs Low maintenance costs with the use of high grade alloys and the robust design. Reliable and stable flaring in a wide range of operating conditions Large turn-down ratio Applications Upstream oil & gas sector LNG terminals and NG compression stations Chemical and petrochemical industries including refineries Food processing industries Municipal solid waste treatment (biogas and landfill gas) plants Temperature controlled combustors and thermal oxidisers.
Request for a quoteCLIPPARD EUROPE SA
Belgium
EVP Series Proportional Valves The EVP series Proportional Control Valves combine the features of the existing EV series valve - long life, low power, and Clippard's reputation for high quality components - with the additional capability for proportional control. The EVP series valve provides air or gas flow control, and varies the output flow based on the current input to the solenoid. The consistent gain of this valve provides a high degree of control for many applications. Controllability and overall value are the main features of the EVP Proportional Valve series. The valve may be controlled using DC current, open or closed-loop control, and even PWM (Pulse Width Modulation) to cover a broad range of applications. Optional Valve Driver below. Read More about the EVP Series View Tips for Selecting the Right EVP Valve View Products • Flow proportional to input current • Fast response • Long life • Single moving part • Low friction and wear • Three connection styles • Two...
Request for a quoteCLIPPARD EUROPE SA
Belgium
An even smaller Mouse valve! When space is critical, the EM Series Valve provides the best solution. At just over an inch tall, and less than 3/4” in diameter, the EM Valve uses Clippard’s special “spider” design. This reliable and proven design for long life is housed in a miniature body, and incorporates wire leads out the top, allowing body rotation for close-center mounting. In addition, the valve features higher flow; combining fast shifting speed, extremely high cycle life with the design flexibility to make this valve a “small wonder” for demanding applications. This valve is perfect for air and/or gas control, pilot control, and any application where space is limited, but desired performance is not. Note: Simply tighten valves onto the manifold using a standard 1/8" Allen hex wrench.
Request for a quoteResults for
Air gas - Import exportNumber of results
11 ProductsCompany type
Category