Automotive testing - Import export

Make informed decisions with our Test Dynamometer service. Our comprehensive data collection process gathers valuable insights from low-speed channels, fast channels, and a variety of sensors. With detailed analysis and reporting, we empower your engineering team to make data-driven decisions that drive innovation and success. Key Features: Comprehensive data collection from diverse sensor types Detailed analysis and reporting for actionable insights Customizable test scenarios to address specific requirements Expert support and guidance throughout the testing process

End-of-Line (EoL) testing devices play a crucial role in assessing product quality post-production. They are instrumental in detecting any visual, auditory, or operational issues that may arise during component installation and assembly, ensuring that only flawless products reach customers. Novosim's end-of-line testing systems cater to a diverse range of applications, including rotary systems (such as transmissions and axles), automotive component testing, noise and vibration level measurements, and specialized testing requirements. These sophisticated EoL testing systems are designed to operate automatically, leveraging a comprehensive array of sensors, data acquisition devices, and testing equipment. They enable the creation of customized test procedures, which are stored in a centralized database for easy access. These procedures can be tailored to different test conditions, accommodating variations in speed, duration, and other parameters.

We offer a large number of materials used by the automotive industry. We will be pleased to supply you with raw and painted metals as well as automotive quality glass with or without ceramic coating. Do you wish to customize your test specimens by having a serial number applied to them? Then please contact us directly by phone or mail. All the plastic grades used in the automotive industry are available in the form of injection molded test specimens. Aluminum 6016 (with a thickness of 1.25 mm) Sheet steel grades DC06, DC04_HX420LAD+Z and DP600 Z140 on stock, further grades upon request Galvanized standard quality DX54D+Z100, DX54D+ Z140, DC04ZE50/50, DC04ZE75/75 (with a thickness of 0.8 mm); other grades upon request Higher-strength grades DP600+Z140 and HX420LAD+Z Die-cast aluminum, magnesium and zinc in various alloys Various steel or aluminum grades dimensioned for the impact test in accordance with ISO 11343 Laminated safety glass (LSG) and tempered safety glass (TSG)

Milling of complex components for automotive and mechanical engineering. Production of prototypes, test parts, small and large series according to data records, drawings, samples or specifications. Machining of cast and forged blanks. Attachment of decorative surfaces.

Development and construction of test systems for environmental simulation, i.e. climate and temperature tests as well as corrosion tests (e.g. MEMS testing and automotive durability tests on tilt sensors, inclination sensors, inertial sensors, inclination sensors, automotive parts and many more). - Adjustable humidity - Typical temperature ranges are -72 to + 120°C - Parallel testing and calibration of more than 100 DUTs simultaneously per test run - Various interfaces to the DUTs can be switched like CAN, LIN, Flexray etc. - Database connection and automated data analysis using Microsoft PowerBi can be added.

control panels, control cabinets, pneumatic systems, pneumatic systems, control units, pre-assembled pneumatic modules for machines and plants in automation technology factory automation assembly lines test benches Also for automotive applications such as brake test benches, assembly robots, conveyor belts. Design, layout, assembly, plug and play delivery. We are also happy to use components according to the parts list, specifications or customer specifications.

No service needed because of contactless data acquisition High accuracy due to frequency modulation and strain gage technology Single power supply High noise immunity due to amplified active signal integrated sensor-detection chip for use with GMV2 analyzer automotive industry test benches assembly applications pulsed tools hexagonal drive 7 Measurement range from ± 0 - 1 Nm up to ± 0 - 20 Nm optionally with angle measurement

Customized Solution The quality of the crimped connection is checked by applying a torsional force. In the automotive area for testing the press connection of components for truck and car engines: e.g. fuel injector.

Particularly suitable for small screwing tools 4 torque range from ± 0 - 0,5 Nm to ± 0 - 5 Nm digital output Square drive or hexagon drive No service needed because of contactless data acquisition High accuracy due to frequency modulation and strain gage technology reduced power consumption High noise immunity due to digital signal very compact design Automotive industry Test benches Assembly applications Pulsed tools

Particularly in the automotive industry there are currently tests underway to virtually simulate production processes with the help of real models. Laser scanners of Z+F deliver the required 3D data in order to generate such models. Film industry Virtual reality plays a key role in the film industry: special effects (e.g. explosions) can be carried out with digital technology without any danger to the people involved or real objects (buildings, historical monuments, vehicles etc.). Nowadays we can see film scenes that were unthinkable a few years ago. Computer/Gaming Whether in computer games or the internet – virtual reality in this area is here to stay. It does not matter whether real objects are represented virtually or fantasy worlds are created with the help of real objects. With Z+F laser data, both is possible.

SE4818 Low Odor is specifically designed for excellent processing and handling for LFT (long fiber reinforced thermoplastic) & CFRT (continuous fiber reinforced thermoplastics) PP applications where low odor is required. LOW ODOR VERIFIED SE4818 Low Odor has been proven to meet low odor requirements per OEM test standards for automotive interior composite parts. Test methods include VDA270 German Association of the Automotive Industry, PV3900 Volkswagen SAE standards and testing and the Geely Low Odor test method Q/JLY J1770528D. EXCELLENT PROCESSING No catenary and low fuzz promotes superior processing, enabling higher efficiencies and lower manufacturing costs with less downtime for cleanup. SUPERIOR COMPOSITE STRENGTH Compared to other reinforcements on the market, SE4818 Low Odor offers superior composite tensile , flexural and Impact performance. Providing maximum part strength and long part service life.

End-of-Line (EoL) testing devices by Novosim ensure post-production quality checks. They detect visual, auditory, and operational issues, guaranteeing flawless products for customers. Novosim's systems cover rotary systems, automotive components, noise, vibration, and specialized tests. These automated systems use sensors and data devices, with customizable test scenarios stored in a database. Test results ensure prompt approval of compliant products and flag defects, maintaining high-quality standards and customer satisfaction

Development of rotating components require intensive testing. While the main goal may be reaching durability and life targets,noise , vibration, temperature and other parameters may play an important role for the customer expectations. Therefore, Novosim offers a customizable testing dynamometer which may be used to in the product development of passenger, commercial, heavy duty or even military vehicle components. Software is easy to use and also highly customizable allowing different product lines to be tested under a single system. With the help of regenerative braking, electricity is recovered and loops back to the test system providing efficient operation. Assuming the tests may run about 1 month, the consumption can be an important parameter for cost control. Different types of data can be collected and stored in a database for further comparisons and tracking of the development process. System automatically generates a report which is also customizable.

Address complex engineering challenges with our custom Test Dynamometer solutions. Our team works closely with yours to design and implement custom testing setups tailored to your specific requirements. From component-level testing to vehicle-level simulations, we provide the flexibility and expertise you need to overcome any challenge. Key Features: Tailored testing solutions for unique engineering challenges Collaborative approach to design and implementation Advanced data collection capabilities for comprehensive analysis Seamless integration with existing workflows and processes

End-of-Line (EoL) testing devices are used to test the quality of the product after the production process. The purpose of the testing system is to check any visual, audio or other problems that may arise during the installation and assembly of components before they are delivered to customers. Application examples of end-of-line testing systems developed by Novosim include: ​ Rotary systems (transmissions, axles, etc.) Automotive Component Testing Noise and vibration level measurements special systems ​ EoL testing systems are complex systems that generally operate automatically and include a range of sensors, data acquisition devices and testing equipment. Test procedures can be prepared in the form of predefined scenarios by the development team and stored in a database. Different scenarios can be prepared for different test conditions (high speed, low speed, long term, short term, etc.) and then called from the database.

Based on years of experience in the field of test bench metrology in the automotive industry, EP develops test bench solutions for various applications. We build test benches for testing automotive components such as heat exchangers, intercoolers, filters, valves and others. These are test benches on which e.g. supplier parts for the automotive industry are tested in production. Our specialist knowledge of the industry makes us a strong partner in this area.

Thermostatic and Climatic Chambers, Galli’s Original Equipments, for environmental simulation tests. Suitable for automotive, aeronautical, electronic, optical, semiconductor, biological, chemical and pharmaceutical industry. Ideal for environmental simulation testing, Genviro Climatic and Thermostatic Chambers provide the solution to your need to meet increasingly stringent International and Automotive standards. The Galli Test Chambers including the severe test requested by the Lithium Battery research, according to the EUCAR Levels of safey. You can choose a Genviro Climatic or a Thermostatic Chamber from various sizes, from compact 30L, 60L, 120 and 245L to larger 3300L volumes.

GALLI's GWALKIN model presents optimal testing conditions, These Walk-In Climatic Test Chambers boast a variety of features and advantages tailored to meet the diverse needs of product testing. Available in volumes from 5m3 to 40m3, equipped with precise temperature & humidity control, and lighting management, they serve as an exceptional choice for stability testing across industries such as Pharma, Food & Beverage, Cosmetics, and Material Testing. Moreover, they are suitable for conducting extreme tests in Automotive, Aeronautical, and various other industrial tests. GWALKIN ensure the ideal testing environments across a broad spectrum of temperatures, from sub-zero levels to high temperatures, with precise control over relative humidity, from minimal values to saturation points. In the pharmaceutical sector, our Walk-In Chambers cater to both long-term and accelerated stability testing conditions, according to ICH Q1A (R2) standard for new drug substances and drug products.

MCB Electronics has designed and developed a versatile comprehensive customizable AC input DC output power supply: Power-Spin. An AC-DC power supply is a power electronic converting equipment which can convert alternating current (AC) into direct current (DC) with variable output voltage and current. The input and output electrical parameter range differs with equipment model, please refer to specific product data sheet for detailed product characteristics. MCB Power-Spin fits a wide array of applications such as powering: - UAV and Wind Tunnels test stands - special Household Appliances - particular automotive components - batteries for testing purpose MCB Power-Spin can support in input any worldwide AC mains electricity according to the required specifications provided by the customer:

ECE R10 is a regulation published by The United Nations Economic Commission for Europe (UNECE) for automotive industry. ECE R10 is defining Electromagnetic Compatibility requirements of the vehicles and electronic sub assemblies (ESAs) used in automotive. Do you need ECE R10 testing or ECE R10 Type Approval, Homologation or E-marking? We are offering ECE R10 testing and type approval (E marking) services with our international network of accredited laboratories and designated technical services. Contact Testups, one of our expert engineers will contact you and send a quote specific to your requirements.

Our revolutionary Halo system is an automatic metal detector testing device. It is designed to automatically test ferrous, non-ferrous and stainless steel samples on all Fortress metal detectors. Automatic testing saves time, money, labour, along with removing the risk of human error and work place injury at critical control points on a manufacturing line while complying with industry standards. The Halo system is ideal for applications where manual testing of a metal detector is made difficult due to access, position, access to the product flow, environmental conditions, etc.