Results for
EC PLAZA
South Korea
Product Descriptions 1) TOTAL 12 Types : BUSHING, CAP, ELBOW, NIPPLE, PLUG, REDUCING NIPPLE, REDUCING, SOCKET, REDUCING TEE, SOCKET, TEE, THREADED UNION, WELDING, UNION 2) TOTAL 2 SIZE Types <SIZE 1 : CAP, ELBOW, NIPPLE, PLUG, SOCKET, TEE, THREADED UNION, WELDING UNION - 1/2", 3/4", 1", 1-1/4", 1-1/2", 2"> <SIZE 2 : BUSHING, REDUCING NIPPLE, REDUCING SOCKET, REDUCING TEE - 3/4"x1/2", 1"x1/2", 1"x3/4", 1-1/4"x1/2", 1-1/4"x3/4", 1-1/4"x1", 1-1/2"x1/2", 1-1/2"x3/4", 1-1/2"x1", 1-1/2"x1-1/4", 2"x1/2", 2"x3/4", 2"x1", 2"x1-1/4", 2"x1-1/2"> 3) Applications - All stainless steel pipes, Hot and Cold water pipeline for industry - Fire water lines and waterworks, Oil pipelines 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 10bar (Maximum operation pressue : 20bar) Features -Twice higher corrosion resistance applied by the solution heat treatment - Uniquely designed to avoid damages by slip of tools
Request for a quoteEC PLAZA
South Korea
Product Descriptions 1) Total 8 Types : ELBOW, TEE, SOCKET, END CAP, VALVE SOCKET, REDUCING SOCKET, REDUCING TEE, SADDLE SOCKET 2) Total 4 Size Types SIZE 1 : ELBOW, TEE, SOCKET, END CAP - 15, 20, 25, 32, 40, 50 SIZE 2 : REDUCING SOCKET, REDUCING TEE - : 20x15, 25x15, 25x20, 32x15, 32x20, 32x25, 40x15, 40x20, 40x25, 40x32, 50x15, 50x20, 50x25, 50x32, 50x40 SIZE 3 : SADDLE SOCKET - 15xPF3/4, 20xPF1, 25xPF11/4, 32xPF11/2, 40xPF2, 50xPF21/2 SIZE 4 : VALVE SOCKET - 15xPT1/2, 20xPT3/4, 25xPT1, 32xPT11/4, 40xPT11/2, 50xPT2 3) Applications - Stainless steel pipe (ASTM A269) - PVC-U, PFP, PSP and Spool pipes - Hot and Cold water for industries and waterworks 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 20 bar Features - Twice higher corrosion resistance applied by the solution heat treatment - Perfect leakage protection by applying uniquely designed cone packing - No pipe breakaway and leakage under condition of ground sink and quake
Request for a quoteEC PLAZA
South Korea
Product Descriptions 1) TOTAL 20 Types One-Piece Hex Welding Ball Valve, One-Piece Hex Ball Valve (Threaded +Welding), One-Piece Ball Valve Two-Piece Ball Valve(10K), Two-Piece Ball Valve(20K), Two-Piece Ball Valve(Steam) Two-Piece Ball Valve (Long Stem Neck), Two-Piece Ball Valve (Full Bore), Camlock Quick Ball Valve Angle Ball Valve, Two-Piece Sanitary Ball Valve, Three-Piece Ball Valve (Threaded Type) Three-Piece Ball Valve(Welding Type), Three-Piece FxW Ball Valve, Three-Way Ball Valve(L Type, T TYPE) HI-DR Ball Valve, Press Joint Ball Valve(Long Stem Neck), Gate Valve, Swing Check Valve, Strainer 2) Size : 1/4", 3/8", 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 3" 3) Applications - All stainless steel pipes, Sanitary valve for food industries - Hot and Cold water for industries and waterworks, Oil pipelines (Neet to change the gasket) 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 10 bar, 20 bar, 30 bar
Request for a quoteEC PLAZA
South Korea
Product Descriptions 1) TOTAL 4 Types : RIGID (BASIC) / FLEXIBLE (BASIC) / RIGID (ONE-PUSH) / FLEXIBLE (ONE-PUSH) 2) Size : 2", 2-1/2", 3", 4", 5", 6", 8", 10", 12" 3) Applications - Fire Extinguishing Pipelines - Water supply pipelines 4) Materials : Ductile iron castings(ASTM A536) / Stainless steel CF8 & CF8M 5) Working Pressure : 20 bar / 35 bar (High-pressure model) Features - One-push insertion method that simply pushes in without disassembling the product (Improving workability) - Step-by-step sealing effect by uniquely designed gasket that lets it naturally adheres to the pipe surface (No gasket deformation and leakage) - Reduced construction time by 4 times compared to basic products - Completion of product quality and function verification through “Korea Institute of Machinery and Materials” - Only supplier in Korea who has acquired the UL approval for both of ductile iron and stainless steel materials
Request for a quoteEC PLAZA
South Korea
Product Descriptions 1) TOTAL 8 Types : GRIP-S / GRIP-L / FLEX-S / FLEX-L / DOUBLE-S / DOUBLE-L / HINGE-S / HINGE-L 2) Size : 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 850, 900, 1000 3) Applications - All types of pipes for water supply lines or various industries. - Used for connection between pipes or emergency repair of pipe-lines. 4) Materials : Stainless steel CF8 & CF8M 5) Working Pressure : 10 bar Features - HISTEN Couplings are designed to maximize flow with minimum pressure loss. - Stainless steel body with High quality sealing materials and optimized design prevent fluid leakage. - Easy and quick installation for general piping application or emergency repair. - Various rubber packing materials are applicable in accordance with different fluids and conditions. - No welding, no heavy tools required, and can be applicable to various pipe materials. - Holds own patents related to the Gasket
Request for a quoteNORELEM FRANCE
France
Zero backlash, torsionally rigid, resiliently flexible and maintenancefree full metal coupling for transmitting angle synchronous rotary movement. The innovative slit structure makes possible a very good axial, radial and angular flexibility with low reset force. Ideal for servomotors. Assembly Recommended shaft tolerances h7. On request Hub bores D1 and D2 with separate tolerance class or range. Note Procedure for enlarging predrilled bores D1/D2 Drill the bore out using a small as possible drill or milling cutter. Use a single point tool to turn or bore the hole out to its finished size. Ensure that the coupling is securely held during the machining process and that the drill feed is not too high. The cut depth should not exceed 0.5 mm and the feed for the single point tool should also be not too high.
Request for a quoteNORELEM FRANCE
France
D1 and D2 are customer specific e.g. 230122025; D1 = 5H7, D2 = 8H7 Note Zero backlash, torsionally rigid, resiliently flexible and maintenancefree full metal coupling for transmitting angle synchronous rotary movement. The innovative slit structure makes possible a very good axial, radial and angular flexibility with low reset force. Ideal for servomotors. Assembly Recommended shaft tolerances h7.
Request for a quoteNORELEM FRANCE
France
Centre disc polyacetal. Hub aluminium. Note Clamping the hub with a grub screw is a costeffective alternative to the Oldhamtype couplings with radial clamping hub (23030). Short mounting times. The couplings can be mounted completely assembled or a plugin assembly is also possible. Take note of the tightening torque for the grub screw. To ease removal we recommend milling a flat on the shaft. Assembly The shaft to hub hole fit is a transition fit. The play should be min. 0.01 mm and max. 0.04 mm i.e. shaft Ø 6 f7 hub Ø 6 H8. Advantages robust plugin playfree short design On request Hub bores D1 and D2 with separate tolerance class or range.
Request for a quoteNORELEM FRANCE
France
Steel 1.0718. Stainless steel 1.4305. Version Steel black oxidised. Stainless steel bright. Note Rigid couplings transmit high torques without rotational play. They are used where there are no shaft displacements or alignment errors. Wearfree and maintenancefree. Screws secured to avoid vibration induced loosening. The maximum torque transmission can only be achieved through optimal installation and correct shaft dimensions. Maximum speed 4000 rpm.
Request for a quoteNORELEM FRANCE
France
Spider polyurethane hardness Shore 98A. Hub aluminium. Conical ring carbon steel. Note This coupling series is particularly suitable for use in high speed main spindle or drill spindle drives. Before the plugin assembly, both clamping ring hubs must be fastened to the shafts with the correct tightening torque. Lightly oil the spider to ease assembly. Assembly The shaft to hub bore fit should be a transition fit. The play should be max. 0.02 mm. i.e shaft Ø 25 k6 bore Ø 25 G6. Bores smaller than D1/D2 min. are possible, however an optimal transfer of the nominal torque is no longer guaranteed. On request Hub bores D1 and D2 with separate tolerance class or range. Drawing reference 1) elastomer spider
Request for a quoteNORELEM FRANCE
France
Particularly compact selfcentring keyless locking coupling without axial offset. for shaft diameters from 8 to 85 mm for medium torques suitable for hubs with low wall thickness no axial offset selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.
Request for a quoteNORELEM FRANCE
France
Keyless locking coupling with low mass and moment of inertia. Easy to connect and release – no jamming on the shaft. Perfect for zero backlash connections. Excellent concentricity and running. Suitable for keyed and keyless shafts. for shaft diameters from 5 to 35 mm for high torques minimum axial offset when mounting selfcentring Assembly Shaft and hub must be free of oil, grease and dirt. Do not lubricate keyless locking coupling. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten nut by hand and use a torque wrench to tighten to the defined tightening torque. Tolerances Shaft diameter and hub hole Form A ±0.04 mm. Form B ±0.08 mm. Surface quality Rz ≤ 16 µm.
Request for a quoteNORELEM FRANCE
France
Coupling stainless steel 1.4057. Screws stainless steel 1.4301. For applications that require a small construction volume and low surface pressure. The keyless locking coupling can be fully recessed in a hub connection. for shaft diameters 6 20 mm suitable for hubs with low wall thickness minimum axial offset possible selfcentring Assembly Lightly oil keyless locking coupling on the tapered faces and contact points of the shaft and hub. Do not use MoS2 or grease. Insert keyless locking coupling in the hub seat and slide onto shaft. Tighten screws crosswise in several increments to the defined tightening torque. Dismantling Remove all screws and screw into the extraction threads of the front flange. Tighten screws crosswise in several steps until the keyless locking coupling loosens. Tolerances Shaft Recommended tolerance h8. Surface quality Rz ≤ 16 µm. Hub Recommended tolerance H8. Surface quality Rz ≤ 16 µm.
Request for a quoteNORELEM FRANCE
France
Universal joints with plain bearing can be swivelled by 45°. Max. transferable torque (Nm) at 150 rpm, operation angle α < 5°. * Bore depth is less than by DIN 808.
Request for a quoteNORELEM FRANCE
France
Steel C35Pb. Gunmetal Rg7. Plastic PA6.6 with MoS2). ISO trapezoidal thread based on DIN 103. Steel nuts for adjustments during manual operation and as fastening nuts. Not advised for use with motorised drives due to the steelsteel material combination. Gunmetal nuts for motion drives with low and medium speed. By insufficient lubrication, gunmetal trapezoidal thread nuts on steel spindles have good dryrunning properties. Plastic nuts for lownoise motion drives. Good dryrunning properties. Tolerance class 7H.
Request for a quoteNORELEM FRANCE
France
Shrink disc to connect a hollow hub to a shaft. They are mounted on the OD of the hub and generate pressure on the hub wall by reducing the ID with wedgeformed rings, creating a press fit between the hub and shaft. They are suitable for static, dynamic and shock loads. for extremely high torques no axial shaft/hub offset when assembling selfcentring The version 23380014072 has high tensile ISO 4762 screws. Assembly Remove existing transportation locks. Clean and lightly oil shaft, internal and external hub diameters. Do not use MoS2 or grease. Slide shrink disc onto hub. Then slide unit (shrink disc/hub) onto shaft and position correctly. Gently tighten clamping screws one after the other by hand. Then use a torque wrench to tighten the clamping screws crosswise in several increments to the defined tightening torque MS. 1st increment approx. 33% MS 2nd increment approx. 66% MS
Request for a quoteNORELEM FRANCE
France
Elastomer spider polyurethane Shore 98A. Coupling housing and clamping hub, aluminium. Expanding mandrel steel. Screws steel. Centring rings 1.4301 stainless steel. Version Coupling housing black anodised. Note The motor adapter set with elastomer dog coupling system (elastomer coupling with expanding mandrel) provides a simple and costeffective solution for connecting electric motors. Advantages of the elastomer dog coupling Hub with expanding mandrel can be mounted axially Playfree with vibration absorption Excellent retaining force Excellent concentric accuracy Short design Easy to assemble Can be mounted axially on spigot side Electrical insulation Nominal torque up to 30 Nm On request Larger hub bore D. Higher nominal torque.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EC PLAZA
South Korea
Since its foundation in 2001, We have accumulated many technologies and know-how in hydraulic businesses such as construction equipment, shipbuilding, and marine plants for more than 20 years. Based on the accumulated know-how in technology research and component production, we promise to do our best to satisfy the customer's needs as much as possible, and to achieve continuous product quality and productivity improvement.
Request for a quoteSTAPPERT INTRAMET SA
Belgium
Coupling similar DIN 2987, grade 1.4571, 1/4"
Request for a quoteSTAPPERT INTRAMET SA
Belgium
Coupling similar DIN 2987, grade 1.4571, 3/8"
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
Speciality Brass Machine Screw manufactured by CNC turning Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
gripper adjusting screw round head diameter: 19.8 mm length: 60 mm external thread: M12x50 4 holes diameter 6 mm, evenly distributed in the round head, threaded straight knurled sharp edge chamfered 0.5x45° material: carbon structural steel ATSM/AISI 1045 surface finish: plated with white zinc unit weight: 70 g Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
Customized Steel Fastener manufacturing by CNC turning, milling, threading Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteSOOCHOW ADVANCE INDUSTRIES CO., LTD.
China
hose coupler housing it is a kind of hardware assemblies, composing of main body and 2 caps. main body – both ends turned with external and internal threads cap – turned with internal thread manufactured by CNC turning material: aluminum alloy ASTM 6061-T6 surface finish: natural color, shiny, anodic oxidation Soochow Advance Industries Co., Ltd., (website: www.sai-parts.com) supplies custom OEM mechanical parts, industrial fasteners, screws, bolts, nuts, industrial fittings, electronic hardware by precision CNC machining, CNC turning, CNC milling, CNC engineering.
Request for a quoteIRIDA LLC (UFANET GROUP)
Russia
Is used for backbone and subscriber FOCL supports as a bracket for an optical distribution box type SNR-FTTH-FDB-24A. This bracket allows storing a cable slack in a coil Ø350 mm in the space between the bracket and the support body.
Request for a quoteLLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteLLC SMARTSERVICE
Russia
Repair kit for pipelines with all accessories for mounting the sleeve and repairing the pipe. The sleeve fitting is manufactured of solid-woven reinforced fiberglass, made in a unique way, which gives a number of advantages compared to standard fittings: fire resistance, high pressure, corrosion resistance, from 30 years of operation. Scope of fitting application - pipelines, including non-metallic, underground, ground, aboveground and underwater versions, with a diameter of 50 to 1200 mm with a maximum internal working pressure of up to 20 Mpa (200 Bar) for pumping gas, oil, petroleum products and other gaseous and liquid media, operated at temperatures from minus 60°C to plus 180°C. Fittings are used for permanent (major) repairs of through and part-through flaws of pipelines with a maximum internal pressure of not more than 12 MPa. Fittings are used for sealing through flaws (fistulas), for integral repair of pipelines with a pressure of up to 20 MPa. Major repairs.
Request for a quoteResults for
Couple - Import exportNumber of results
33 ProductsCompany type