Adhesive pads - Import export

Perfectly suitable for containers loaded up to the walls where the Absorpole and Absorgel Hanging cannot be effective. The Absorgel blankets starts working as soon as it is removed from its transparent sealed packaging. It can be placed on top of the cargo or pallets with the printed side facing upwards. The calcium chloride absorbs moisture from the surrounding air passing in through its breathable packaging. The Absorgel's adhesive gel ensures absorbed moisture stays in the product. A film of recyclable PE plastic on the lower side ensures that moisture cannot escape below. The Absorgel Blanket is also fitted with adhesive pads below to keep it securely in place. Absorgel Blankets can be used for all types of cargo. They are especially suitable when the cargo is tightly packed close to the container ceiling and walls. Absorgel Blankets are also suitable for reefer containers and trailers that do not have lashing rings to hang desiccants

The Gecko Gripper (SP) enables the use of the innovative Gecko adhesive gripper technology in applications with a small surface area. Such areas which could not be automated so far. The gecko-inspired adhesive technology offers precise, track-free gripping. Even with porous workpieces this technology works. For example printed circuit boards or glossy surfaces. Cleaning is not necessary. The three different Gecko Single Pad Grippers (SP1, SP3 and SP5) are named after their payload in kilograms. Of course, the Gecko grippers can be used with leading lightweight robots and cobots. The compact single-pad design allows easy access to the workpiece, even in tight spaces. Since no electronics or air supply is required, the Gecko SP is a cost-effective plug-and-play solution. The Gecko gripper leaves no marks on glass. This eliminates the need for manual cleaning. This means a higher RoI and lower operating costs.

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 12 self-adhesive strips with rectangle pads in parallel order Pre-scratched rated break point for the separation of individual modules from the board Size 90 x 100 mm

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 14 self-adhesive strips with quadro-pads Pre-scratched rated break point for the separation of individual modules from the board Size 90 x 100 mm

Epoxy fibre-glass FR4 0.80 mm Single-sided 35 µm Cu Without holes Hot air leveling (HAL-leadfree) 12 self-adhesive strips with square-pads in parallel order Pre-scratched rated break point for the separation of individual modules from the board Size 90 x 100 mm

Self-adhesive, steel pictogram. Dimensions: Ø 65 mm • Made from premium-quality brushed stainless steel • Robust, scratch-proof print • Versatile and easy to understand sign • With enclosed adhesive pad for fastening to a great variety of surfaces • Motif: “PUSH”

Document pocket made of weather-resistant film with waterproof pressure closure. Fastening with enclosed self-adhesive pads. • Document pockets that are ideal for displaying information outside or in humid interior spaces such as garden centres, saunas or swimming pools where signs maybe be subjected to splashes and spray • Waterproof press stud closure for very good document protection • Attach the display pocket however you want using the four highly transparent self-adhesive pads (included), which can be removed without leaving any residue • Compliant with standard IPX5 (protection against spray from all directions) • Transparent, UV-stabilised, water-resistant, scratch-proof film with anti-glare effect • Can be used in either portrait or landscape format • Documents can be replaced quickly and easily • Holds two 160 g/qm posters (included) • A wide range of labelling style sheets is available at www.duraprint.de • Suitable for US-letter-size formats

A Rubber based material Eva, is another material that we prefer to manufacture in the area of Floor Protectors. Along with the protection of floor, Eva material is distincted from the Felt material with the prevention of sliding feature.

Synthetic Felt Made of Synthetic Felt Floor Protectors, strong glue and ground with scratch-resistant feature plan. Our Adhesive Felt Floor Protectors, furniture and floors, we demonstrate superior performance in terms of compatibility and development.

Silicone Glass Table Anti-Slip Pads are applied to the parts of the tables where the glass contacts with the metal/wooden part. When it is applied, the glass table will not be able to slide anymore.

Silicone Bumper Pads are applied on furnitures' cupboard and drawer edges to prevent the noise while shutting them.

Thanks to extremely compact design the overexcitation rectifier "Slim Collection" can be installed in very restricted space. The module features a central bore for screw fixing inside the terminal box. It can also be installed by using an adhesive pad.

By mounting an axial fan, the effectiveness of the new Kühligel® can be increased considerably. Fanless solutions require a lot of space. They are heavy and expensive. For cooling with active coolers by SEPA EUROPE however, the new Kühligels are not only small and light but also extremely inexpensive. Thanks to intensive development work, SEPA EUROPE was able to construct a heat sink that enables fan mounting without extensive reworking using conventional screws. The choice of the suitable fan (size, sleeve or ball bearings, 5, 12, or 24 VDC, tacho, connector) enables the best possible combination that is required for the application in question. The fans used have a MTBF of up to 350000h (40°C) and thus meet the highest requirements. Thanks to its light weight, the Kühligel® can usually be mounted using double-sided adhesive heat conduction pads (TCTxx) or thermally conductive two-component adhesive (Hernon 746) which are both available from the SEPA EUROPE product range.

Inspired by customer inquiries, SEPA EUROPE has developed a new, modular assembly for the efficient cooling of chips. The core component is a SEPA axial fan that is mounted on a 40 mm pure aluminium heat sink – a so-called Kühligel®. It is equipped with a finger guard and a double-sided adhesive heat pad for screwless mounting on the housing or inside the device. Thanks to the compact design, the light weight and the screwless mounting, this assembly enables accurate positioning and thus effective cooling of the hot spot. The chip cooler HXB40FGK is equipped with a high precision ball bearing and can be used at ambient temperatures between -10 and +85 °C thus opening up a wide range of application possibilities. A further advantage is the long service life of the fan with 350 000 h (MTBF) at 40°C. The chip cooler assembly HXB40FGK is supplied as a standard component. It can however, be customized.

This flexible PCB antenna has a dipole structure for GSM and UMTS. It is provided with an adhesive pad with only 0.24 mm thickness and can therefore be used on all non-metallic surfaces. The PCB antenna is particularly suitable for space-saving applications and has an outstanding performance against comparable PCB antennas.

ELASTIC NON_WOVEN WOUND DRESSING TRANSPARENT PU WOUND DRESSING ECONOMIC WOUND DRESSING ABSORBENT WOUND PAD CUPPING PAD NON-WOVEN I.V FIXATION DRESSING TRANSPARENT PU I.V FIXATION DRESSING INJECTION PLASTERS HEMOSTATIC PRESSURE PLASTER SELF-ADHESIVE EYE PADS PEDIATRIC SELF-ADHESIVE EYE PAD NON-WOVEN ABSORBENT COMPRESS NON-WOVEN SPONGE

Disposable breast pads by Peligrin and Belle Epoque are an ideal hygiene product for lactating mothers, they perfectly absorb liquid, protect underwear from soaking. They are suited for sensitive breast skin, stay soft as long as you are using it and do not get rough even having absorbed breast milk. They follow the shape of the breast and are unnoticeable from the outside. Special adhesive strip prevents the pad from shifting. The assortment includes the breast pads both of a classic round and anatomic shape, of white and black color, with superabsorbent and without it. Each breast pad is single-packed so it makes it more comfortable and hygienic to use. The assortment also includes different packages. All the breast pads produced by our company passed international certification (EC Declaration of conformity) and comply with European quality standards. The breast pads can be produced both under our brand and your private label.