Adhesive mortar - Import export

Primer and adhesion promoter based on acrylic polymers with low emissions of volatile organic substances. Ready for indoor and outdoor use, with inert fillers that give it a textured surface. USES FIXMAR PRIMER GR is an adhesion promoter suitable for improving the adhesion of any type of plaster or coating on concrete, brick, lightweight block or plaster supports, as well as on non-absorbent supports such as ceramic floor coverings. On walls and floors. Suitable for application on non-absorbent supports such as ceramic floor coverings with subsequent installation of ceramic or natural stone coverings. On porous cement, anhydrite or sand screeds, FIXMAR PRIMER GR primer acts as a fixer of dust residues, facilitating the correct adhesion of a self-leveling mortar. Acts as a pore cover.

COMPOSITION AND APPEARANCE Plaster-based powder coating containing calcium carbonate, resin and various additives. The mixed paste is white in colour. SUITABLE SURFACES Concrete, chipboards, cement coating, aerated concrete. REFERENCE DOCUMENTS DTU 25.41 and 25.42. Standard NF EN 14496. CE mark. TECHNICAL CHARACTERISTICS • Setting time: 2 hours. • Reaction to fire A1. PACK SIZE 25 kg bag on shrink-wrapped pallet. 5 kg bag. PREPARATION OF SURFACES The wall surface must be sound, free from dust and oil, and show no signs of damp. In summer if the supports are too dry, they may be slightly moistened. QUANTITY OF MIXING WATER 12.5 litres of water per 25 kg bag. APPLICATION Generally applied in “dabs” approx. 10 cm in diameter, with 30 cm horizontal spacing and 40 cm vertical spacing on the plasterboard or insulation.

25 KG MEGAFIX TILE ADHESIVE

Waterbased pigmented primer for all types of masonry substrates. Suitable even on fresh concrete and mortar. Features Excellent adhesion to concrete. Excellent alkali and efflorescence resistance. Excellent water resistance. Good UV resistance. Interior and exterior. Eco friendly. Solvents free. Ready for use, do not dilute.

Galvanized paint mixer. With perforated rubber pad for hanging. Suitable for mixing high viscosity materials such as tile and construction adhesives, mortars, premixed plasters and concrete.

Industry floors, concrete block-systems, plant pots, bicycle paths, clinkers, tiles, flags, joint wet mortar, cement adhesive, mineral paints,… NATURAL OXIDES: yellow, red, brown, black SYNTHETIC IRON OXIDES: yellow, red, brown, black DRAGON PIGMENTS: blue, green, grey CHROME OXIDE GREEN COBALTOXIDE BLUE CARBON- or PITCH-BLACK (limited) TITANIUM DIOXIDE WHITE A pigment is a substance that has the capacity of colouring a certain carrier (cement, plaster, synthetic fibres, paint, …). Contrary to dyes, pigments are insoluble. Therefore, pigments remain under the form of small particles and will just be dispersed in the carrier and so colouring the carrier. The colouring capacity of the pigment depends on the fineness of the particles composing the pigment. In general we can say that the finer the particles are, the higher the colouring capacity of the pigment will be. A pigment is only suitable for certain applications. The pigment shouldn’t react with the carrier.

Product Description Cement based, polymer-reinforced, ready-to-use aerated concrete adhesive mortar with increased adhesion strength and high water absorption. Areas of Usage • lndoor and outdoor, • in vertical and horizontal applications, • Houses, shopping malls, hospitals, • it is used for bonding structural elements such as aerated concrete, bricks. Features and Benefits • Partially resistant against water, damp and frost. • lts application is easy. • it has high adhesion strength. • it saves time and labor.

Cradle 2003 Sheet steel cradle, open Suitable for 385ml 3:1 side-by-side cartridges Color Black, turquoise Other colors on request Drive Extrusion rate: G= 2.9mm/pump Extrusion force ~1400N (at a manual force of 10kg) Application example: 2K adhesive, composite mortar ... Other drives on request Benefits Rubber-cushioned handles Inline movement of the piston rods (patented) Rigid, warp-free housing Wear-free, hardened, and specially chromium-plated drives Professional steel cartridge cradle Three mechanical step-up ratios available Custom colors on request Packaging Individually packed in PE bags 12 units per box 470mm x 310mm x 250mm

Cradle 2003 Sheet steel cradle, open Suitable for 385ml 3:1 side-by-side cartridges Color Black, turquoise Other colors on request Drive Extrusion rate: G= 2.9mm/pump Extrusion force ~1400N (at a manual force of 10kg) Application example: 2K adhesive, composite mortar ... Other drives on request Benefits Parallel lever (patented) Symmetry drive (patented). Two high-strength steel drive plates, moving in symmetry, ensure an optimal extrusion rate.Two ball bearings ensure optimal transfer of power to the drive plates. Wear-free, hardened drive rods Inline movement of the piston rods (patented) Professional steel cartridge cradle Four mechanical step-up ratios available Custom colors on request Packaging Individually packed in outer box 435mm x 180mm x 115mm

Cradle 3003 Sheet steel cradle, open Suitable for 330/345ml 10:1/7:1 side-by-side cartridges Also suitable for 310ml 1K cartridges Color Black, turquoise Other colors on request Drive Extrusion rate: E= 2.1mm/pump Extrusion force ~1900N (at a manual force of 10kg) Application example: 2K adhesive, assembly and composite mortar ... Other drives on request Benefits Parallel lever (patented) Symmetry drive (patented). Two high-strength steel drive plates, moving in symmetry, ensure an optimal extrusion rate.Two ball bearings ensure optimal transfer of power to the drive plates. Wear-free, hardened drive rods Inline movement of the piston rods (patented) Professional steel cartridge cradle Four mechanical step-up ratios available Custom colors on request Packaging Individually packed in outer box 435mm x 180mm x 105mm

Cradle 4515 Sheet steel cradle, open Suitable for 585ml and 380ml 3:1 side-by-side cartridges Color Black, turquoise Other colors on request Drive Extrusion rate: G= 2.9mm/pump Extrusion force ~1400N (at a manual force of 10kg) Application example: 2K composite mortar, adhesive ... Other drives on request Benefits Inline movement of the piston rod (patented) Symmetry drive (patented). Two drive plates and double brake plates made of high-strength steel, moving in symmetry, ensure an optimal extrusion rate. The toggle transmission ensures optimal transmission of force to the drive plates Wear-free, hardened drive rods and pusher plates Professional steel cartridge cradle Three mechanical step-up ratios available Custom colors on request Packaging Individually packed in PE bags 12 units per box 470mm x 310mm x 250mm

An adhesive mortar used for fixing the cement-based ,water and frost resistant plates, it has high adhesion strength , is resitant to thermal changes and used for thermal insulation on the interior and exterior walls.

Ready-made adhesive mortar with reduced slip feature and polymer additive that is used in bonding ceramics and tiles. used by mixing it only with water in certain propotions.

Highly cohesive, flexible, ready made adhesive mortar with reduced slip feature, extended standing time after opening, and polymer additive that is used in bonding stones such as ceramics, tiles,terracotta, clinker,granite,and natural granite. Used by mixing it with water in certain propotions.

KAROFiX® SUPER FLEX Cement-Based High Performance Elastic Adhesive Mortar APPLICATION FIELD Provides superior performance in fixing of coating materials such as ceramic, granite, porcelain ceramic, marble, travertine etc. at all sizes on horizontal and vertical surfaces for interior and exterior areas. It may be applied on dry and wet areas (baths, swimming pools, water tanks, terrace, etc.), cement-based plasters and concrete surfaces, floorings with floor heating system, floors exposed to high level of traffic, areas with thermal shock risk, cold storage rooms, floors exposed to vibration, and applications of ceramics over ceramics.

- Cement-based, high performance, elastic thin insulation plate adhesive mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. - High bonding strength - Ease of application SCOPE OF APPLICATION - Bonding of plates indoors and outdoors in buildings, - On surfaces such as concrete, plaster, screed brick

Cement-based, single-textured adhesive mortar with chemical additives that increase the product structure and workability. - Conforms to TS 11140 / EN 12004. SCOPE OF APPLICATION - For bonding small and medium(*) sized small and medium(*) natural stone, travertine cladding walls with a water absorption rate over 3% - Indoor and Outdoor - On concrete, plaster, tap

DESCRIPTION IZOTEX MAXI 250 is flexible ,waterproofing membrane made of PP/PE/PP layers USAGE AREA It is used for waterproofing and damp-proofing under ceramic tile ADVANTAGES - It is %100 waterproof , high water pressure resistant and damp proof - It is a flexible material that allows ease of application at hard workable corners , floor and wall joints , tight angles - It has strong mechanical bonding to the adhesive and surface. Heat or other toxic elements are not used for bonding - It is is a lightweighted APPLICATION: 1. The membrane is cut and prepared in a required size, according to the application area 2. C2 class tile adhesive mortar is applied to the surface with notched trowel 3. It is placed on the surface and air bubbles is removed with a flat side of the trowel 4. Joints should be bonded considering the direction of water flow and there should be 5 cm overlaps at joints 5. The surface is covered with coating materials

Including White Cement, Grey Cement, Mortar and Adhesive

- Cement-based, high performance, elastic thin plaster mortar containing special chemical additives, which is preferred in places where the ambient temperature changes suddenly or where it is flexible. SCOPE OF APPLICATION - On rough plaster indoors and outdoors in buildings - As a finishing coat on exposed concrete - Plastering of thermal insulation boards in jacketing thermal insulation systems - It is used to repair fine cracks and gaps on old plaster or concrete surfaces.