Ac aluminium - Import export

Handles cast aluminum EN AC-46200. Thrust washer plastic PA 66 GF 35-X fibreglass reinforced. Hinge pin stainless steel 1.4305. Studs and washer steel grade 5.8 or stainless steel 1.4305. Version: Handles fine structured powder-coated, black or red RAL 3003. Thrust washer black. Hinge pin bright. Studs and washer blue passivated steel or bright stainless steel. Note: Plastics are subject to creeping under load (retardation).

U guide unit for pneumatic cylinders ISO Ø32 to Ø80 Short guide on bronze bearings Protected by wipers seals Short guide for ISO15552 pneumatic cylinder This Classic Series provides antirotation of the cylinder rod. The guide is shorter than the H Classic series and is only available in plain bearings, so this series is recommended for low strokes and moderate loads. Anticorroding Uguide For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). For all stainless steel guides, refer to the 34*X series. Protection kit and back stop kit on Uguide The protection kit (tube wrapping the rods at the rear of the guide), for example allows to avoid a guarding housing on a semiautomatic machine (label maker …). The back stop kit, with hydraulic shock absorber, allows

For pneumatic cylinders ISO Ø8 and Ø10 Guide on bronze bearings or ball bushings The smallest guide unit in the range It’s the smallest unit, suitable for ISO6432 Ø8 and Ø10 pneumatic cylinders, allowing an ISO cylinder to be kept for small guided cylinder applications. It has a long Ushape to remain compact and have a guide length comparable to an Hshape. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). Any special stroke is possible, with a maxi stroke of 200 mm.

U guide unit for pneumatic cylinders ISO Ø12 to Ø80 Antirotation guide on bronze bearings Protected by wipers seals Antirotation for ISO pneumatic cylinder This Light Series provides antirotation of the cylinder rod. With limited dimensions, it permits to use an ISO cylinder for shortstroke translations, while protecting the rod of the cylinder with its floating rod coupling. For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and the front plate are remaining in anodized aluminum (suffix /AC after the reference). For all stainless steel guides, refer to the 34*X series.

H guide unit for pneumatic cylinders ISO Ø25 to Ø125 Very sturdy guide on plain bearings Protected by wipers seals Guide unit with large rods This Heavy Series has bigger guide rods than the Strengthened series. The thick front plate also allows long centering of the guide rods for better resistance to torsion. Only available in plain bearing version, it’s recommended for important radial loads in static. Sturdy guide for Ø125 cylinder Adapted to the ISO6432 (Ø25) and ISO15552 (Ø32 to 125) cylinders, this range therefore also makes it possible to meet the more robust guide needs for Ø125 cylinders, the guide rods then being Ø40, on 4 plain bearings. Anticorroding heavy guide For environments requiring an anticorrosion version, the steel parts can be supplied in stainless steel (rods, coupling, screws), the body and front plate are remaining in anodized aluminum (suffix /AC after the reference). Scrapers in polyurethane can be proposed for dusty or dirty environments.

3-hole 90° Screw-in BSPP Threaded Flange WP-3-LK-G ▪ Working Pressure: 300 bar ▪ Ø LK: 26 mm ... 56 mm ▪ Materials: S355J0 or equivalent ▪ Surfaces: ZnNi 4-hole 90° Screw-in BSPP Threaded Flange WP-LK-G ▪ Working Pressure: 250 bar ... 300 bar ▪ Ø LK:35 mm ... 55 mm ▪ Materials: S355J0or equivalent ▪ Surfaces: ZnNi 3-hole 90° Screw-in BSPP Threaded Flange(Aluminium) WP-3-LK-G-W50 ▪ Working Pressure: 180 bar ▪ Ø LK: 26 mm ... 51-56 mm ▪ Materials: Aluminium [EN AC-Al Si9Cu(Fe)] 4-hole 90° Screw-in BSPP Threaded Flange (Aluminium) WP-LK-G-W50 ▪ Working Pressure: 180 bar ▪ Ø LK : 30 mm ... 55 mm ▪ Materials: Aluminium [EN AC-Al Si9Cu(Fe)]

Used Electric Motor scrap, Fridge and AC Compressor Scrap, Aluminium Engine scrap, Lead Battery Scrap, Paper Scrap, etc; Drained Copper Compressor – Fridges/AC (RAINS per ISRI Specifications). Our copper content on 99.97 % Fridge/AC Compressor Scraps We sell Fridge/AC Compressor Scraps at a very competitive market price. detailed Specifications : Compressor Weight : 2kg, 4kg, 6kg, 8kg, 10kg, and 12kg More Details: 220-240 v 50 or 60 Hz. Cooling capacity: 90-190 w displ Size : 5.99 -12.53 cm3 Purity: 99.98% copper inside with connection box Aluminum Engine Block Scrap Pb (Min): 99% Alloy Or Not: Non-alloy Material: Lead Drained Used Electric Motor Scrap (RAINS per ISRI Specifications) Motor Scrap: 99.97 % Grade: A Type: All kinds of Motor Scrap Fe Content: HMS Fe Content (%): 100%)

EMA series evaporators are designed with an extra slim aluminum frame, making it an ideal option for small premises. This compact small capacity evaporator saves space and can be installed in narrow niches. Assembled with high quality copper tubes with working pressure up to 32 bars, aluminum fins, AC/EC fans and electric heating elements for defrosting, this product is ideal for commercial applications in various supermarkets, cold rooms, warehouses and more. Fin spacing varies between 3,5 mm and 9,9 mm at Te from +10 ºC to -40 ºC. These evaporators can also be designed for CO2 systems up to 80 bars on request.

EMT series evaporators are designed with two horizontally arranged coils, which make the frame flat and perfect for large rooms with low ceilings. The evaporator’s ability to simultaneously pull and blow air is perfect for large open spaces that require even air distribution. Assembled with high quality copper tubes with working pressure up to 32 bars, aluminum fins, AC/EC fans and electric heating elements for defrosting, this product is ideal for commercial applications in various supermarkets, cold rooms, warehouses and more. Fin spacing varies between 3,5 mm and 9,9 mm at Te from +10 ºC to -40 ºC. These evaporators can also be designed for CO2 systems up to 80 bars on request.

Wide capacity range EMC series evaporators are the most popular option when choosing evaporator for applications in various supermarkets, cold rooms, warehouses and other premises. They are easy to instal, as well as easy to maintain and clean. Assembled with high quality copper tubes with working pressure up to 32 bars, aluminum fins, AC/EC fans and electric heating elements for defrosting. Fin spacing varies between 3,5 mm and 9,9 mm at Te from +10 ºC to -40 ºC. These evaporators can also be designed for CO2 systems up to 80 bars on request.

Our capacitors of the E12 and E33 series are universally-suited for lighting and motor applications as well as power factor correction and power electronics. Their winding element of self-healing polypropylene film is immersed in eco-friendly vegetable oil and designed for highest requirements regarding operational life and functional safety even at high operating temperatures and other extreme conditions such as high humidity. Connection is made through tab connectors. The hermetical aluminium can is provided with an integrated overpressure safety mechanism (break-action mechanism, " BAM ") that disconnects the capacitor irreversibly from the supply in the event of a failure. The E12/E33 ranges comply with the "Type B" classification under lighting standard IEC/EN61048 as well as with "Class P2" under motor capacitor standard IEC/EN 60252-1. Please mind our safety remarks on the use of lighting capacitors in critical environment.