EMC

EV SERIES SHELL&TUBE EVAPORATORS RANGE FROM 20KW TO 1510 KW COOLING CAPACITY IN EVAPTON'S STANDARD CONDITIONS. THE REFRIGERANT SIDE CAN BE MANUFACTURED FROM 1 CIRCUIT TO 4 CIRCUITS. EV SERIES EVAPORATORS CAN BE USED WITH HCFC AND HFC REFRIGERANTS WITH MEDIUM TO HIGH SYSTEM PRESSURE (30-45 BAR). EVA SERIES EVAPORATORS CAN BE MANUFACTURED BOTH IN STANDARD CATALOG SIZES AND IN THE SIZES REQUESTED BY THE CUSTOMER. EVERY EVAPORATOR MANUFACTURED IS CONTROLLED BY UNILAB LICENSE PROGRAM FOR CAPACITY AND PRESSURE DROPS AND TRANSMITTED TO THE CUSTOMER. EVS - SINGLE CIRCUIT EVAPORATOR EVD - DOUBLE CIRCUIT EVAPORATOR

Short path distillation is a thermal separation technology operating at process pressures in the range of 1 to 0,001 mbar. It lowers the boiling temperature and is an excellent method for gentle thermal treatment of heat sensitive, high boiling products. The short path evaporator consist basically of a cylindrical body with a heating jacket, a rotor and an internal condenser. The rotor creates a mechanically agitated, thin product film on the heating surface inside of the body. By means of gravity the product flows down in a spiral path, whereby the volatile portion of the product evaporates. The vapour passes by the shortest route and with practically no pressure drop to the internal condenser. The non-volatile portion reaches the lower part of the evaporator and is discharged through the bottom product outlet. The residual vapours and inert gases flow through the vacuum nozzle to the vacuum system.

Tubes wound into a spiral shape Coaxial heat exchangers consist of two or more pipe coils, which are routed into one another and wound up in a spiral shape. The primary medium runs in countercurrent to the secondary medium. Fast temperature exchange This countercurrent design achieves a very rapid temperature transition with high efficiency between the liquids. Due to the spiral shape, the rapid temperature exchange between the liquids is achieved in a very small space. No cleaning or maintenance required Another advantage is the encapsulation of both liquids from environmental influences. There is practically no cleaning or maintenance effort due to pollution from the environment. The coaxial heat exchanger also does not require any seals that require maintenance. Condenser or evaporator function Coaxial heat exchangers can be used for both condenser and evaporator functions.

You state your requirements and send us the material properties. KASAG then configures the thermal and hydraulic calculations for the desired heat exchanger. The realization is implemented according to the available drawings or on the basis of a comprehensive engineering. KASAG offers all processes necessary for that, such as the orbital-welding process for manufacturing heat exchangers. With KASAG, you can be sustainably flexible.