Guide rails drylin® t - Plastic slide guides
Guide rails drylin® t - Plastic slide guides

Guide rails drylin® t - Plastic slide guides

Extruded section, aluminium EN AW6060. Version Hard anodised aluminium, 50 µm. Hardness 500 HV. Note The aluminium guide rail has good thermal conductivity and importantly heats only at continuously very high speeds. ** lengths L2 = 20 mm * and L = 500 mm included L2 and L only available in full mm. Reference:21200
Similar products
1/15
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on...
FR-10280 Fontaines Les Gres
Hex head bolts stainless steel with seal washer in hygienic - Connecting elements
Hex head bolts stainless steel with seal washer in hygienic - Connecting elements
The Hygienic DESIGN fastening system was specially developed for use in food processing facilities. Special attention was paid to the cleaning-optimis...
FR-10280 Fontaines Les Gres
Positioning pins cylindrical ground - Locating pins, positioning systems
Positioning pins cylindrical ground - Locating pins, positioning systems
Positioning pins cylindrical ground - Locating pins, positioning systems Reference:03120 Material:Tool steel Version:Hardened and ground...
FR-10280 Fontaines Les Gres
Drill bushes flanged din 172 - Drill bushes
Drill bushes flanged din 172 - Drill bushes
From diameter D1 over 15 mm size increases are 0.5 mm. Reference:08910 Material:Special low carbon steel Version:Hardened to 740 ±80 HV 10 and ground...
FR-10280 Fontaines Les Gres
Steel flat head screw with tolerance compensation for floating - Connecting elements
Steel flat head screw with tolerance compensation for floating - Connecting elements
The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The fl...
FR-10280 Fontaines Les Gres
Clamping elements for profile guide rails - Profile guide rails
Clamping elements for profile guide rails - Profile guide rails
Housing steel. Clamping lever plastic. Threaded spindle grade 12.9. Version Housing nickelplated. Clamping lever, spindle black oxidised. Note Manuall...
FR-10280 Fontaines Les Gres
Magnetic sensors passive sensors miniature design - Scales, position indicators
Magnetic sensors passive sensors miniature design - Scales, position indicators
Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Ca...
FR-10280 Fontaines Les Gres
Workholding cubes grey cast iron with grid holes - Basic elements
Workholding cubes grey cast iron with grid holes - Basic elements
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a de...
FR-10280 Fontaines Les Gres
Chain tensioner sets - Chains and sprockets
Chain tensioner sets - Chains and sprockets
Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. N...
FR-10280 Fontaines Les Gres
Hinges plastic, lift-off, left - Hinges
Hinges plastic, lift-off, left - Hinges
Fibreglass reinforced thermoplastic. Hinge pin stainless steel. Version: Hinge black. Pin bright. Note: All hinges can be supplied on request with gui...
FR-10280 Fontaines Les Gres
Tombstones grey cast iron double-sided with grid holes - Basic elements
Tombstones grey cast iron double-sided with grid holes - Basic elements
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a de...
FR-10280 Fontaines Les Gres
Hexagon head screws stainless steel in hygienic design - Connecting elements
Hexagon head screws stainless steel in hygienic design - Connecting elements
The surface of the hexagon head bolt is polished and, with regard to design optimised for the use in hygienic environments. The bolt head is convex on...
FR-10280 Fontaines Les Gres
Thrust clamps - Positioning elements
Thrust clamps - Positioning elements
Cam tool steel, hardened and black oxidised. Shaft carbon steel, hardened and black oxidised. Grip carbon steel, black oxidised. Ball knob black therm...
FR-10280 Fontaines Les Gres
Swing clamps pneumatic - Pneumatic clamps
Swing clamps pneumatic - Pneumatic clamps
Swing clamps are used where low clamping forces suffice or where the clamping point must be free when mounting and removing the workpiece. The block f...
FR-10280 Fontaines Les Gres
Magnetic tape scale with incremental coding 5 mm pole length - Scales, position indicators
Magnetic tape scale with incremental coding 5 mm pole length - Scales, position indicators
Magnetic tape, magnetised plastic sheet. Carrier band steel. Cover band stainless steel. Version Scale with incremented coding. Pole length 5 mm. Note...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play