Magnetic tape, magnetised plastic sheet.
Carrier band steel.
Cover band stainless steel.
Version
Scale with incremented coding.
Pole length 5 mm.
Note
Simple adhesive mounting; selfassembly possible.
Required tape length calculated from
measuring path + sensor length "L" + (2 x run or return "B").
L = see drawing of sensor used.
B = 10 mm (run and return).
Technical data
Coefficient of expansion (11 ± 1) x 106/K (spring steel)
Temperature range
Ambient temperature 20–70°C
Storage temperature 40–70°C
Assembly
Installation using the preaffixed doublesided adhesive tape must be carried out according to the enclosed user information.
On request
Other lengths from 0.1–100 m, in increments of 0.1 m.
Note
Relative humidity 100%. Dewing is permissible.
Drawing reference
1) Cover band A = 0.176 mm
2) Magnetic tape M = 1.0 mm
3) Carrier band T = 0.3 mm
4) Adhesive tape K = 0.1 mm
5) Required tape length = measuring path + L + 2 x B
6) Measuring path
Reference:21725
From diameter D1 over 15 mm size increases are 0.5 mm.
Reference:08910
Material:Special low carbon steel
Version:Hardened to 740 ±80 HV 10 and ground...
Bullseye level body stainless steel up to Ø14 mm, then aluminium.
Sight window glass.
Version
Aluminium black anodised.
Note
Bubble levels are used as...
Housing brass.
Magnetic core NdFeB (neodymium).
Smooth design, shielded system. Under no circumstances may Neodym magnets be pressed directly into iro...
These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. T...
Grid spacing 50 ±0.02 mm.
Tombstones with grid holes are used on horizontal machining centres.
The alphanumerically labelled grid holes guarantee a de...
The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other.
The fl...
The mandrel collet is used in small through bores to position and clamp workpieces. Clamping is carried out manually from above using a hex key. The m...
Reference surfaces precision machined
Note:
Ring bolts for lifting are supplied.
A cover prevents the cavities filling with swarf.
Drawing reference:
...
Housing hardened and black oxidised.
Contact faces ground.
Note:
This positioning and clamping system is especially suitable for installation in fixtu...
Roller and cage polyamide, glassbead reinforced.
Steel axis.
Cage black.
Roller available in different colours.
The roller elements are matched to the...
Fibreglass reinforced thermoplastic.
Hinge pin stainless steel.
Version:
Hinge black. Pin bright.
Note:
All hinges can be supplied on request with gui...
Steel C35Pb.
Gunmetal Rg7.
Plastic PA6.6 with MoS2).
ISO trapezoidal thread based on DIN 103.
Steel nuts for adjustments during manual operation and a...
From diameter D1 over 15 mm size increases are 0.5 mm.
Reference:08910
Material:Special low carbon steel
Version:Hardened to 740 ±80 HV 10 and ground...
Bullseye level body stainless steel up to Ø14 mm, then aluminium.
Sight window glass.
Version
Aluminium black anodised.
Note
Bubble levels are used as...
Housing brass.
Magnetic core NdFeB (neodymium).
Smooth design, shielded system. Under no circumstances may Neodym magnets be pressed directly into iro...
These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. T...
Grid spacing 50 ±0.02 mm.
Tombstones with grid holes are used on horizontal machining centres.
The alphanumerically labelled grid holes guarantee a de...
The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other.
The fl...
The mandrel collet is used in small through bores to position and clamp workpieces. Clamping is carried out manually from above using a hex key. The m...
Reference surfaces precision machined
Note:
Ring bolts for lifting are supplied.
A cover prevents the cavities filling with swarf.
Drawing reference:
...
Housing hardened and black oxidised.
Contact faces ground.
Note:
This positioning and clamping system is especially suitable for installation in fixtu...
Roller and cage polyamide, glassbead reinforced.
Steel axis.
Cage black.
Roller available in different colours.
The roller elements are matched to the...
Fibreglass reinforced thermoplastic.
Hinge pin stainless steel.
Version:
Hinge black. Pin bright.
Note:
All hinges can be supplied on request with gui...
Steel C35Pb.
Gunmetal Rg7.
Plastic PA6.6 with MoS2).
ISO trapezoidal thread based on DIN 103.
Steel nuts for adjustments during manual operation and a...