Workholding cubes grey cast iron with grid holes - Basic elements
Workholding cubes grey cast iron with grid holes - Basic elements

Workholding cubes grey cast iron with grid holes - Basic elements

Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a defined assignment of clamping elements by repeat setups. The tombstones conform to machine tables for machine tools acc. to DIN 55201 and JIS 6337-1980. Please order locating pins for positioning subplates on machine tables acc. to DIN 55201 separately. Please order protection plugs to plug unused grid holes separately. Ring bolts for hoisting are supplied. Other dimensions available on request. Drawing reference: 1) grid hole 2) hole for DIN 912 cap screw (D3/D4) Reference:01850 Material:GJL 300
Similar products
1/15
Chain tensioner sets - Chains and sprockets
Chain tensioner sets - Chains and sprockets
Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. N...
FR-10280 Fontaines Les Gres
Precision slides roller mounted with micrometer spindle and - Carriage guides
Precision slides roller mounted with micrometer spindle and - Carriage guides
These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. T...
FR-10280 Fontaines Les Gres
Magnetic tape scale with incremental coding 5 mm pole length - Scales, position indicators
Magnetic tape scale with incremental coding 5 mm pole length - Scales, position indicators
Magnetic tape, magnetised plastic sheet. Carrier band steel. Cover band stainless steel. Version Scale with incremented coding. Pole length 5 mm. Note...
FR-10280 Fontaines Les Gres
Magnetic sensors passive sensors miniature design - Scales, position indicators
Magnetic sensors passive sensors miniature design - Scales, position indicators
Housing aluminium. Cable sheath PVC. Version Compact sensor and plug design. Flat connector, 8pole, 1x pin. Connection cable, 6wire, ø 3.55–0.3 mm. Ca...
FR-10280 Fontaines Les Gres
Tombstones grey cast iron double-sided with grid holes - Basic elements
Tombstones grey cast iron double-sided with grid holes - Basic elements
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a de...
FR-10280 Fontaines Les Gres
Hex head bolts stainless steel with seal washer in hygienic - Connecting elements
Hex head bolts stainless steel with seal washer in hygienic - Connecting elements
The Hygienic DESIGN fastening system was specially developed for use in food processing facilities. Special attention was paid to the cleaning-optimis...
FR-10280 Fontaines Les Gres
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on...
FR-10280 Fontaines Les Gres
Rest pads - Rest pads and positioning feet
Rest pads - Rest pads and positioning feet
Case-hardened, black oxidised and ground. Reference:02130 Material:Steel 1.0301...
FR-10280 Fontaines Les Gres
Steel flat head screw with tolerance compensation for floating - Connecting elements
Steel flat head screw with tolerance compensation for floating - Connecting elements
The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The fl...
FR-10280 Fontaines Les Gres
Side clamp with cam - Side clamp
Side clamp with cam - Side clamp
1. Screw the locking screw into the collar bush, fixture clamp and clamping unit and screw onto the baseplate. 2. The workpiece is clamped by tighteni...
FR-10280 Fontaines Les Gres
Stepper motor with integrated positioning control - Stepper motors
Stepper motor with integrated positioning control - Stepper motors
2-phase high-torque stepper motor in NEMA 17, NEMA 23 and NEMA 34 sizes with flat-milled shaft (D-shaft). 1.8ׄ° increment angle (full increment) with ...
FR-10280 Fontaines Les Gres
Drill bushes flanged din 172 - Drill bushes
Drill bushes flanged din 172 - Drill bushes
From diameter D1 over 15 mm size increases are 0.5 mm. Reference:08910 Material:Special low carbon steel Version:Hardened to 740 ±80 HV 10 and ground...
FR-10280 Fontaines Les Gres
Mandrel collet for small bores - Centring clamps
Mandrel collet for small bores - Centring clamps
The mandrel collet is used in small through bores to position and clamp workpieces. Clamping is carried out manually from above using a hex key. The m...
FR-10280 Fontaines Les Gres
Thrust clamps - Positioning elements
Thrust clamps - Positioning elements
Cam tool steel, hardened and black oxidised. Shaft carbon steel, hardened and black oxidised. Grip carbon steel, black oxidised. Ball knob black therm...
FR-10280 Fontaines Les Gres
Hexagon head screws stainless steel in hygienic design - Connecting elements
Hexagon head screws stainless steel in hygienic design - Connecting elements
The surface of the hexagon head bolt is polished and, with regard to design optimised for the use in hygienic environments. The bolt head is convex on...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play