Ball-end thrust screws with head - Ball-end thrust screws and baseplates
Ball-end thrust screws with head - Ball-end thrust screws and baseplates

Ball-end thrust screws with head - Ball-end thrust screws and baseplates

Form A with full ball is used when a clean, polished contact surface is required. Surfaces which are not flat and parallel can be firmly clamped or supported with Form B with flattened ball, the movable ball can adapt itself up to 9°. Drawing reference: Form A: full ball Form B: flattened ball Form BV: flattened ball, rotation lock Form F: serrated flattened ball Form FV: serrated flattened ball, rotation lock Reference:07100
Similar products
1/15
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Pneumatic round cylinders din iso 6432 double-acting with - Pneumatic cylinder
Doubleacting pneumatic cylinder acc. to DIN ISO 6432. Piston rod with external thread, position detection for proximity switch and flexible damping on...
FR-10280 Fontaines Les Gres
Drill bushes flanged din 172 - Drill bushes
Drill bushes flanged din 172 - Drill bushes
From diameter D1 over 15 mm size increases are 0.5 mm. Reference:08910 Material:Special low carbon steel Version:Hardened to 740 ±80 HV 10 and ground...
FR-10280 Fontaines Les Gres
Steel flat head screw with tolerance compensation for floating - Connecting elements
Steel flat head screw with tolerance compensation for floating - Connecting elements
The floating joint unit is a bolt for connecting two components, that permits a desired movement of those components in relation to each other. The fl...
FR-10280 Fontaines Les Gres
Chain tensioner sets - Chains and sprockets
Chain tensioner sets - Chains and sprockets
Tensioner Vesconite® plastic. Screw and nut steel. Version Screw ISO 4017, grade 8.8, electro zincplated. Nut ISO 4035, grade 8, electro zincplated. N...
FR-10280 Fontaines Les Gres
Shoulder screws form b - Connecting elements
Shoulder screws form b - Connecting elements
Tempered, black oxidised. Precision diameters ground. Reference:07533 Material:Carbon steel...
FR-10280 Fontaines Les Gres
Tombstones grey cast iron double-sided with grid holes - Basic elements
Tombstones grey cast iron double-sided with grid holes - Basic elements
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a de...
FR-10280 Fontaines Les Gres
Hexagon head screws stainless steel in hygienic design - Connecting elements
Hexagon head screws stainless steel in hygienic design - Connecting elements
The surface of the hexagon head bolt is polished and, with regard to design optimised for the use in hygienic environments. The bolt head is convex on...
FR-10280 Fontaines Les Gres
Mandrel collet for small bores - Centring clamps
Mandrel collet for small bores - Centring clamps
The mandrel collet is used in small through bores to position and clamp workpieces. Clamping is carried out manually from above using a hex key. The m...
FR-10280 Fontaines Les Gres
Positioning pins cylindrical ground - Locating pins, positioning systems
Positioning pins cylindrical ground - Locating pins, positioning systems
Positioning pins cylindrical ground - Locating pins, positioning systems Reference:03120 Material:Tool steel Version:Hardened and ground...
FR-10280 Fontaines Les Gres
Backstop elements steel for roller rails - Special elements
Backstop elements steel for roller rails - Special elements
Backstop steel. Axis steel. Cage polyamide, carbonfibre reinforced. Version Electro zincplated Cage black. Note The backstop element is matched to the...
FR-10280 Fontaines Les Gres
Hinges plastic, lift-off, left - Hinges
Hinges plastic, lift-off, left - Hinges
Fibreglass reinforced thermoplastic. Hinge pin stainless steel. Version: Hinge black. Pin bright. Note: All hinges can be supplied on request with gui...
FR-10280 Fontaines Les Gres
Magnetic tape scale with incremental coding 5 mm pole length - Scales, position indicators
Magnetic tape scale with incremental coding 5 mm pole length - Scales, position indicators
Magnetic tape, magnetised plastic sheet. Carrier band steel. Cover band stainless steel. Version Scale with incremented coding. Pole length 5 mm. Note...
FR-10280 Fontaines Les Gres
Workholding cubes grey cast iron with grid holes - Basic elements
Workholding cubes grey cast iron with grid holes - Basic elements
Grid spacing 50 ±0.02 mm. Tombstones with grid holes are used on horizontal machining centres. The alphanumerically labelled grid holes guarantee a de...
FR-10280 Fontaines Les Gres
Five lobe grips plastic lockable - Grips, handles and knobs
Five lobe grips plastic lockable - Grips, handles and knobs
Lockable five lobe grips prevent unauthorised loosening of the screw connection. The cylinder lock forms a positive lock between grip and screw. When ...
FR-10280 Fontaines Les Gres
Precision slides roller mounted with micrometer spindle and - Carriage guides
Precision slides roller mounted with micrometer spindle and - Carriage guides
These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision mechanics. T...
FR-10280 Fontaines Les Gres

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play