technical ceramic parts

...Alumina ceramic (Aluminum Oxide or Al2O3) is an excellent electrical insulator and one of the most widely used advanced ceramic materials. In addition, it is extremely resistant to wear and corrosion and is an industrial ceramic that can only be formed by diamond grinding. The melting point is very high at 2,072°C, and it is very hard. Alumina components can be widely used in electronics, pump components and automotive sensors. Material: Alumina:92%, 95%, 96%, 99%, 99.7%...

... tolerance specifications for the subsequent process at the customer’s site. Why? Because sleeves with fluctuating geometries cannot be further processed. Absolute precision is therefore essential. We can provide absolute precision. The customer commissioned us to manufacture the sleeves. On one hand, because we meet the special deep-drawing technical requirements. On the other hand, because we can offer a connected, targeted heat treatment for material relaxation in-house. To ensure the required flawless further processing, our initial focus was on the forming behavior of the material.

...Ceramics offer better material properties than steel in many applications. The shaping possibilities for all ceramic parts are very extensive today.

...BTF's technical service is responsible for the maintenance and repair of ovens of all brands, either on-site or in our workshops. It can also conduct thermographic studies on-site to check the temperature uniformity in your installations while in use. Its expert technicians are at your service to analyze your needs and advise you on the acquisition of spare parts and accessories: • Regulation...

... requirements in terms of mechanical strength, water and gas tightness, thermal resistance, and protection against high radiation temperatures. Application temperature: up to 550°C Application limit temperature: approx. 600°C Variants: made from smooth or specially air-textured yarns Material thickness: 0.5 - 3.0 mm Standard width: 1000 - 2000 mm Format: roll goods, blankets, cut pieces, stamped parts, custom configurations...

... multiple dimensions for customization according to your needs. Switch between the handheld shower, bath spout, and shower head using the different mechanical handles. Harmonize your water space by complementing this thermostatic bath set with a sink faucet, a drain, and a siphon in matte black finish. Technical elements: Materials: Brass + stainless steel alloy Cartridge materials: Ceramic Adjustable height: Yes Warranty: Body 5 years, wear parts 2 years...

... holes and extend the lifespan of assemblies. Spiral elastic pins for light-duty applications are generally recommended for soft, brittle, or thin materials such as plastics, aluminum, die-cast parts, ceramics, and when holes are located near the edge of the assembly. In situations that are not subjected to significant loads, such as when used solely for alignment or as an axis, light spiral pins are often used.

...WILOFA diamond instruments have proven to be highly effective for dental technical processing. Benefit from our experience and work with precise tools. For ceramics: - For shaping the firing ceramics - For separating after the initial firing - For grinding oxide ceramic frameworks - For reworking fissures in ceramic chewing surfaces - For fine grinding of silicate ceramics, inlays, veneers...

...Bipolar terminal block made of technical ceramic, designed for the connection of electrical cables in civil and industrial distribution systems. These terminals, thanks to the excellent thermal resistance properties provided by the ceramic and the stainless steel inserts, are used in machinery such as electric furnaces, electric resistors, and equipment where extremely high temperature resistance is required. Inserts, screws, and small parts are made of AISI 304. Operating temperature: -20°C to 500°C Nominal voltage: 450 Volts...

...Especially with difficult-to-process materials such as ceramics, carbon composite materials, or fiberglass, our extensive technical expertise and suitable process techniques enable the production of precision parts that meet specifications. Product Examples Turning and milling parts in 2D/3D, CNC-turned parts, High-Speed Cutting (HSC) milled parts, turned parts made of acrylic, and much more. Advantages • Precise end products according to drawings, sample parts, or CAD data • Processing of a wide variety of plastics and special materials • High technical expertise regarding...

...We produce your parts according to specifications and technical drawings. We are your partner in realizing your requirements in technical ceramics, such as zirconia ATZ - Y-TZP.

... technical ceramics are therefore utilized in a wide range of applications. In response to these requirements, Glastechnik Kirste KG offers efficient and highly precise processing of components made from technical ceramics. Specializing in high-precision manufacturing, we take on the production of: • Translucent opal glass rods • Ceramic rods • And ceramic plates In this process, the parts are ground to high precision in diameter or machined on the surface (grooves, contours, cutouts) using CNC-controlled milling machines.

... with the versatility of a high-performance plastic – making it an exceptionally machinable material. Through turning and milling, even the most demanding shapes and smallest precision parts can be produced. When the performance of a technical ceramic is required and the application necessitates the creation of a complex shape, Macor® glass ceramic is the ideal material. It significantly reduces the time between development and application, thereby lowering costs.

...We deliver large and small series according to your drawing specifications upon request. A material with a future • Wear-resistant • Heat-resistant up to well over 1000°C • Corrosion-resistant • Insensitive to chemicals • Non-magnetic • No electrical charging • Food-safe • Hard as diamond The use of technical ceramic parts made from aluminum oxide, zirconium oxide, and silicon nitride in...

...Ceramic components offer significant advantages over metal and plastic parts . They have a dimensional stability at high temperatures. They are good electrical insulators. They do not outgas in vacuum environment. Ceramics are inert materials and resistant to many gases and chemicals. They show high thermal insulating properties or high thermal dissipation. Applications and products...

... requirement, you need to purchase 5 boxes of products. – Firing is done twice at 1.040 and 1.100 degrees. – Artistic techniques and glazes are used, no product is the same as another. – It is resistant to outdoor weather conditions. – The price does not include assembly. Technical information for assembly is given by our team. – Designed and manufactured by Stil44 in Izmir/Turkey. * The product photo is a representation, parts and colors may differ. Please contact us for any questions or special order requests.

CERAMIC BALLS - WHEN PRECISION MATTERS... mg technical ceramics stands for expertise and quality - see for yourself. For over 20 years, we have been collaborating with national and international ball manufacturers. Our focus is on consulting and distributing ceramic balls and ball bearings made from various special materials. If top quality, expertise, and innovation are your priorities, talk to...

... insulators feature embedded metal reinforcements on the surface of the head and base to allow for attachment to the support and conductor. Our product range also includes special parts based on drawings provided by customers or developed according to their needs by our technical department.

...For the machining of technical ceramic parts TYROLIT offers a comprehensive range for the machining of ceramic components. Depending on the application, various bond sets are used with optimized performance associated with new diamond qualities. - Low wheel wear - High removal rate - Low grinding forces...

...The injection molding process offers immense design freedom. In particular, for complex and/or delicate components, such as those with angled holes, threads, and undercuts, it presents an economical manufacturing option. Thus, even for smaller quantities of complex micro parts, an injection molded part is often the more economical or even the only feasible solution. The parts shown here are examples from various industries and provide you with an initial overview of feasibility, giving you a prompt for a new technology.

... meets all the needs of its customers with leasing (Good Rental) and second-hand selling services (Second New) in addition to sales and after-sales services of the brands it represents. All these services are offered to customers in various sectors such as construction, mining, industry, steel, ceramics, wood industry, and energy. BMS provides privileged and exclusive services to its customers with its Main Office in Istanbul, Branch Office in Izmir, wide sales teams, and authorized technical services in many different cities throughout Turkey.

...Appliance Repair in Barcelona. Urgent and at the best price. Technical service for washing machines, dishwashers, ovens, dryers, refrigerators, freezers, microwaves, and ceramic hobs. We cover all of Barcelona and the surrounding area, and we offer an urgent service within 3 hours for hospitality and commercial establishments.

...A feature of the KMT-118C draft gear is the use of elastic elements of increased reliability and energy intensity in the design of the plate apparatus, as well as the implementation of the apparatus parts from heat-treated steel with bronze inserts. This makes it possible to achieve, firstly, a high energy consumption of the device, and, secondly, to avoid the use of metal-ceramic linings, which...

...Discover MECAJET the new range of Water Jet equipments conceived by MECANUMERIC, machining and cutting by VHP soft materials, and, with addition of abrasive, hard materials. Refer to the exemples of applications : Precision engineering technical parts Electric vehicles parts Parts for subways Parts for trams Bus parts Trolleys Household appliances Lights Furniture Weather vanes Discover the new...

Already in the second generation, BISCHOFF sees itself not only as a supplier of components and assembly groups but also as a partner to customers in all upcoming questions. BISCHOFF provides comprehensive, supportive consulting and offers solutions for manufacturing problems right from the development phase. Our experience is your benefit WE manufacture with a modern, computer-controlled machine...

...Injection molding is a manufacturing technique for producing parts in large or very large quantities. It primarily involves plastics and elastomers (rubbers), but also various metals and alloys with relatively low melting points: aluminum alloys, zinc (Zamak), and brass. Furthermore, this process can be used for shaping parts made of technical ceramics, provided that a type of slip is prepared with some melting component at a relatively low temperature, such as paraffin or polyethylene (PE).

... that ensures the complete satisfaction of our clients and their loyalty, paying special attention to every detail in the production process. At TALLSA, we work with a wide variety of materials, including steel, aluminum, brass, titanium, technical plastics, ceramics, and special steels. Additionally, we machine parts from standardized hardware screws, allowing us to meet the needs of different...

... according to DIN ISO 9001: 2015 is a prerequisite to meet the growing demands of our customers. Components made from technical ceramics are used in a wide range of industries due to their excellent physical properties. In particular, the electrical and mechanical characteristics at high temperatures, combined with high wear and corrosion resistance, distinguish components made from these materials. They offer decisive advantages where other materials reach their limits. As parts of high-quality system groups, technical ceramic components often fulfill function-critical tasks.

Holz-Plast Plastic and Timber industry Ltd (Holz-Plast Műanyag és Faipari Kft.) was founded in 1994 as a family business. From 2021, under new ownership and with renewed development ambitions, it continues its successful production processes. The company is engaged in moulded plastic products that meet high quality and technical requirements. Mainly as a supplier to the automotive industry, and...

R.T.P. Paganoni from Cesana Brianza, in the province of Lecco, is a manufacturer of spare parts for wire drawing machines for both ferrous and non-ferrous materials. Specializing in the construction of custom or sample parts and in the regeneration of old components. The company is constantly seeking innovative materials to create products tailored to customer needs. It develops special and...