high current systems

...At SPOLMONT s.r.o., we specialize in comprehensive electrical installation services, offering high-quality solutions for both low-current and high-current industrial equipment. Our experienced team ensures the highest standards of safety, efficiency, and reliability in every project we undertake. Our Services Include: Ensuring optimal performance and compliance with industry standards...

...KIN-48/230-3 inverter cassette possible to install up to three IN-1.0/48М inverters up to 1000 W each. Cassette with installed inverters provides connected equipment high-quality AC power. Parallel operation up to 4 inverter cassettes with a total power up to 12 kW or construction of a three-phase system on three cassettes is possible. Modification with optional bypass module available. RS-485...

...The Pressure Switch F01 fulfils the high requirements of the EN13849-1 Machinery Directive. The F01 can be used for systems with Performance Level PL d and for safety-critical applications. The F01 has an E1 approval. The F01 is available for pressure ranges from 10 to 1200 bar and has two switching outputs which switch inverted to each other. The F01 is also available with one switching and one...

...The Performance Sensor eCap measures the analog electrical power of machines to control, optimize, and protect technical systems using the obtained digital data. A precise and fast universal power sensor and energy meter for high-accuracy applications. The power sensor measures voltages, currents, power, energy, frequency, and power factor values, allowing for fully galvanically isolated...

... monthly test • Automatic annual test • 3-phase network monitoring (NHV) • Voltage monitoring of the continuous charging voltage for over- and under-voltage • Charging current monitoring (too high / too low, no charging current despite network presence) • Battery circuit monitoring • Buffer memory for 1000 messages...

... with 2 combustion chambers, an electric door for waste loading, advanced control systems for parameters and combustion cycles, automation, alarms, safety elements, a power generator, a fuel tank, a light tower, and the option to equip with an electric system for waste loading, along with multiple optional features. The high-capacity mobile incinerator IncinerPro u operates in full compliance with current European legislation (e.g., Regulations CE 1069/2009, EU 142/2011) and is manufactured in Romania, in accordance with ISO 9001 and ISO 14001 standards. We provide warranty, service, and training.

...This 2500W digital controlled, compact 1U power supply designed for energy storage systems with rechargeable batteries can automatically switch the conversion direction from high voltage DC sources powered by solar or wind to 48Vdc batteries, or vice versa. Other applications include lithium-ion battery testing and the use of reclaimed energy from robots, cranes, autonomous ground vehicles, and elevators.

...The NxxxE-0U current sensor is dedicated for installation on the cables of a gas or insulated switchgear in the primary or secondary energy distribution. The design is split able, which makes it able to put the sensor on an existing cable. Due to cost effective construction, the sensor has a very high cost-benefit ratio Passive technology, no active parts are inside, or a power supply is needed:Big inner diameter for installation on 3 cables Split-able form factor for Retrofit installations:Correction factors for amplitude and phase inaccuracy improve the sensor class...

... protective grounding allows a high fault current to flow through the fault circuit during a fault condition, enabling circuit-breaking devices to quickly disconnect the circuit, thereby cutting off the energy in the faulty circuit as soon as possible. Operating & Functional Grounding Operating Grounding (RB) refers to the grounding process carried out to maintain the voltages of the active parts of operating devices in electrical installations at a certain level against the ground (e.g., star point grounding).

...eldec Welding Systems: Automatic Induction Welding of Exciter Coils The exciter coil welding installation is a semi-automatic production machine designed to manufacture exciter coils for hydraulic or wind power generators. It is a robust machine and has been designed to require minimal maintenance; the components used are in line with the current state of the art and are of high quality. Operating the machine is very straightforward: the sequential program through the operation of 2 hands allows for automatic production development, while the touchscreen enables control in manual mode.

... backlighting. The latter provides information about the time, room conditions, and the current status of the HVAC technology. A heating/cooling thermostat variant, two heating thermostat/fan coil combinations, and three versions with RS485 Modbus interface allow for flexible adaptation to individual conditions and the integration of JOY into building management systems. Whether operating the thermostat on-site in the room or configuring it with the help of the central unit, controlling the room parameters is simple and precise...

... used on outdoor perimeter sectors free from buildings and big vegetation. The sensor assures reliable protection of the site under control. Operational frequency:10,525 GHz Range:5…50 m Detection width:0,75...2 m Detection height:up to 1,4 m Supply Voltage:9…30 V Current consumption:0,035 A Detection probability:0.98 Operational temperature:minus 40...+80 °C Protection Level:IP-55 Alarm output:Relay contacts Dimensions:141x123x71 mm Weight:0,4 kg...

...It is designed using a very rugged LDMOS transistor. So, its efficiency is very high. Max. Input power is 50W. It has reflection, current and temperature protections. Output power can be set to lower powers. It has a room temperature and humidity sensor inside, so it automatically runs airconditioner according to transmitter room air condition. It keeps event logs. It has a remote control...

... Dimensions: length 484 mm - height 44.4 mm / 1U – depth 100 mm Manufactured in: Avigliana TO Italy Warranty: 3 years Electric power strip for powering devices in the rack cabinet, designed to accommodate products up to 32 Amper The structure is made of painted sheet metal in black RAL 9005. The IEC C13 sockets are in multiples of 4 [4 modules of 4 sockets], which connect directly to the power cable, preventing overheating of the electrical cables in case of high consumption. The mounting brackets are an integral part of the metal structure for improved grounding.

... HYDRAULIC DISTRIBUTORS FOR SALE Among the products in the catalog, the following are highlighted: • monoblock distributors • modular distributors • direct control distributors • pneumatic control distributors • electro-hydraulic control distributors • proportional control distributors (load sensing / flow sharing) • mechanical, pneumatic, and electric flow diverters. These distributors are designed to effectively meet the various needs of customers, all in compliance with current regulations in the sector.

... dioxide, captures solid particulate matter that is reduced thanks to the combined action of TiO2 and high-intensity UV-C LEDs. Therefore, Photo4CTB is capable of sanitizing the air and surfaces in the presence of people, decomposing harmful substances typically found in environments and neutralizing unpleasant odors. It reduces: viruses, bacteria, molds, yeasts, VOCs, PM2.5, and PM10.

... resistances that have a very low cold value which increases with temperature. A typical application is superkanthal resistances, which exhibit a resistance variation from cold to hot of 1/15. Additionally, there is an effective current limit, adjustable by the user, which ensures total safety in case of overloads and high inrush currents. Available sizes: 12 ÷ 1200 A 400 VAC Phase angle ignition Electrically isolated input from the network Selectable analog input All live parts are covered by a...

...takes place in the connection housing. • The output values can be visualized via a uni-display or accessed through the corresponding outputs. Housing: PP • Versions C4: The current module transmits fill level, distance, or volume directly via a standardized 0/4–20 mA signal. R: The relay module has four programmable relay outputs. MD: Modbus-RTU including 2 relay outputs.

...Qualified processing for filter technology precisely according to manufacturer specifications We produce professional filter hoses & filter bags for trouble-free plant operation that comply with the current regulations of modern filter technology. Rely on top-notch quality, reliability, and perfect filtration to ensure optimal performance of your filter hoses and filter bags. By using high...

...Our extraction system, the FilterCube 4H, offers outstanding performance with a separation efficiency of ≥ 99%. It is specifically designed for use in environments with high-alloy steels and meets the safety requirements of the welding fume class "W3". The system can be used in recirculation mode in accordance with the current hazardous substances regulation. Suitable capture elements efficiently...

... connection:Connection clamp Duty cycle:1 Rated current max.:At 50 Hz: 2.65 A At 60 Hz: 2.62 A Power consumption P:At 50 Hz: 350 W At 60 Hz: 350 W Noise level:60 dB(A) Permissible operating pressure (p. max.):1 bar - 6 bar Water connections:G ¾" internal thread eCl@ss 8.0/8.1:27180712 Packs of:1 pc(s) Weight/pack:115 kg EAN:4028177698123 Customs tariff number:84158300 ETIM 7.0:EC002515 ETIM 6.0:EC002515 eCl@ss 8.0/8.1:27180712 eCl@ss 6.0/6.1:27180712...

...high voltage, high temperature endurance (in different types of characteristics), high ripple current performance. Therefore it can be successfully used in HID Lightning, DC-DC converter, Air conditioning, ECU and EFI applications etc. Moreover, it is well known that modern trend of automotive sector opens up our capacitor technology, satisfying EV, HEV and PHEV’s high density and high temperature power systems requirements.

...Features OF65: Universal input 100 to 240 V AC, voltage regulated, current limited, minimal standby loss, high efficiency, short-circuit proof, leakage current ≤ 100 mA, compact design, without active fan. Additional Information • Protection Class: I • MTBF: 200,000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically...

... systems. With HiFocus neo, users benefit from higher speeds in cutting and marking electrically conductive materials, while maintaining very good quality and low process costs compared to the competition. Thanks to optimized technology, wear parts are preserved, making plasma cutting more efficient. The plasma cutting system HiFocus 600i neo features the proven Contour Cut technology for fast and precise cutting of contours, holes, and webs in structural steel. Application: Plasma cutting, metal cutting Additional features: automated CNC, high speed...

... precise electrode for supply units up to 60 kV. The charge and field distribution has been significantly improved by the optimized arrangement of the individual electrodes. Separately current-limited tips prevent the rise of air ionization and high-energy brush discharges. Electrode body: fiberglass reinforced plastic (GFRP) Operating ambient temperature: R130A / R131A: 0...+60°C (+32...+140°F...

... influences on pipelines, plan and implement protective measures for personnel safety and to prevent alternating current corrosion. You can find our complete range of services in our brochure "Intelligent Corrosion Protection." As a customer, you receive technically advanced and economically efficient services and products from a single source, provided by the competence leader in Germany, such as: - Passive corrosion protection - High voltage influence & alternating current corrosion - Expert and consulting activities - Condition assessment - Training...

... exhibition areas, as well as public spaces to an unparalleled extent. High-quality products, professional lighting planning, intelligent controls, and careful installation by professionals are essential components of our services. ● Current assessment ● Lighting planning and design ● Cost-effectiveness calculation ● Installation ● Funding evaluation ● Follow-up evaluation ● Documentation ● Prototype construction...

... requirement is that the workpiece conducts electrical current... With five wire EDM machines, four sinker EDM systems, and a start hole drilling machine, we can execute orders on very short notice. Our experienced and highly motivated employees ensure the success of even the most complex workpieces.

...We plan and implement switchgear up to 6000A together with you. We are the right contact for you in the field of power distribution and offer solutions for the planning, project development, and manufacturing of switchgear of all kinds. Our range of services includes the following focuses: - High current systems for industrial applications up to 5000A rated current (ABB-Striebel & John and...

... Image size:Up to 8Kx8K scan size DSP:Floating point 320 MHz DSP Digital FB:Yes 6 Channels DACs:4 composite DACs (3x16bit) for X,Y,Z, Bias Voltage 2 16-bit DAC for user output High-voltage outputs:X, -X, Y, -Y, Z, -Z at -150 V to +150 V XY RMS noise in 1000 Hz bandwidth:0.3 ppm RMS Z RMS noise in 1000 Hz bandwidth:0.3 ppm RMS XY bandwidth:4 kHz (LV regime – 10 kHz) Z bandwidth:9 kHz Maximal current...