extruded tubes

...In the aluminium industry, the porthole extrusion process is the standard method for the production of extruded tubes and profiles. The process is limited to a number of aluminium alloys. However, most of the commercially available medium strength aluminium alloys such as EN AW-6060 or EN AW-6082 can be extruded by porthole extrusion.

...Cylinder Tubes - Ground Tubes H8 - Cold Drawn Tubes H9 Standard Length: 4000 / 12,000 mm Customized solutions available upon request...

...For Air/Water/Fuel transfer, we manufacture a range of hoses in SBR, , PVC/NBR, Hypalon®, Viton®, Neoprene ® (CR), Vamac ® (AEM) and NBR The reinforcement fabrics used are usually Polyester and Nylon, and sometimes even Kevlar ® / Aramid are used for higher temperatures, as per the customer’s requirements The inner tube and outer cover materials may vary, for example, inner nitrile/outer neoprene (available in reinforced, as well as non-reinforced options) We also can develop non-reinforced extruded tubes in different shapes, if the service pressure requirements are very low...

... weld (once the tube is packaged, it has the same appearance as a classic cosmetic tube) – High-resolution decorations at 600dpi (dots per inch) – No offset clichés, but a more economical graphic design package – No complex offset surcharges – The possibility of a proof on a flat tube in 4-5 days – A better lead time than extruded tubes – Attractive minimum order quantities (MOQ)...

...This product has an unique flip top "doctoral cap' with streamlined design that is easy to open. Available for extruded tubes (1-layer, 2-layer and 5-layer) and laminate tubes. Mainly used for toothpaste, cleanser, etc. Diameter:35mm Tube's type:round Capacity:40-100ml...

...Metzner has developed the mandrel cutting machines of the SR series for cutting off sealing rings from injection-moulded or extruded tubes with different diameters. These machines are characterised by their unique processing method and high cutting quality. First, pre-extended "rubber tubes" are clamped onto mandrels. Due to the special design of the mandrels, the mandrel can be set up and...

...the tubes can be strikingly printed or kept simple for use in the workshop. Tubes can be perfectly tailored to your application. We offer different sizes, from small one-shot tubes to large tubes with sponge applicators; we can do it all. From transparent to six-color printed, your product will definitely stand out. Whether thin or highly viscous (silicone pastes, silicone rubber, silicone greases, assembly pastes, copper pastes, etc.), this poses no problem at all. From various PE mix tubes... Print: 1 - 6 colors. Diameter: 22 - 50 mm Length: 80 - 200 mm Material: Plastic composite...

Ming Xiao Manufacturing Co., Ltd. is a professional ISO9001 certificated Metal Parts & Plastic Parts manufacturer, Located in China Ningbo, Specialized in Services of Sheet Metal Fabricating, CNC Turning & Machining, Tube Bending, Cold Forging & Hot Forging, Plastic Injection Molding & Plastic Extrusion. We produce small & large turned parts and machined parts, Precision CNC Turned Parts by CNC ...

... suitable barrier layer – usually EVOH – to optimally and sustainably protect your contents. Thanks to the multilayer laminate structure, our Pirlo RECY Tubes can reduce the use of petroleum-based plastics in the tube casing by up to 50% compared to conventional extruded plastic tubes. Additionally, these PBL tubes are characterized by their good recyclability. Diameter: 30 mm, 35 mm, 40 mm, 50 mm Filling volume (from to): 20 – 275 ml Material thickness and barrier layer: 300/15 µm, 350/25 µm...

...Aluminum Cylinder Tubes, Pneumatic Profiles & Extrusion Profiles Cylinder tubes in sizes ranging from 12 to 400 mm nominal diameter with tight inner diameter tolerances (H 11) and low roughness.

...Addix, a French subsidiary of the axon' group, specialising in elastomer components. The company offers extruded profiles for any application. Shapes Standard and special shapes Cords Tubes Cold or hot profile adhesion Compounds Other compounds (see the comparison table) Applications Any market...

...Errecinque designs and manufactures a significant number of specific pipes for cooling circuits. The range includes smooth thermoplastic pipes, either single or multi-layer, as well as corrugated pipes extruded in-house, often combined with other components made from different materials, such as rubber and steel. Errecinque is capable of offering a significant number of connection interfaces...

...The Eder Group offers high-quality round tubes that are characterized by their strength and versatility. These products are ideal for various industrial and construction applications. Product Features: - Geometry: Round tube - Materials: Cast aluminum, extruded aluminum, drawn aluminum, bare steel, bronze, drawn/sanded stainless steel, rolled/forged stainless steel, gray cast iron/spheroidal cast...

...The Bi TUBES is an assembly of 2 insulated tubes, joined by the insulation. It allows both diameters to be in sertedin one operation when installing The extruded PE insulation provides excellent resistance to tearing and the right density. Already available in 1/4-3/8, we shall be offering 1/4-1/2 within the next few weeks, followed by the other diameters during the year. Euroclass certification...

...Polyflon offers FEP tubes in IDs ranging from 0.2mm up to 100mm and due to FEP being melt processable, very long continuous lengths are possible. Excellent chemical resistance, surface smoothness, transparency and purity of FEP tubing make it the material of choice in many fluid handling applications within the semiconductor, chemical process plant, instrumentation, bio-tech and medical markets.

...Products in the form of profiles (strips, blocks, seals, tubes, hoses, spirals, cords, etc.) are used in various industries including furniture, electronics, automotive, and construction. We manufacture the profiles through extrusion and co-extrusion from various materials: • NOVOPLAST® – soft PVC • NOVODUR® – hard PVC • PP, LD-PE, HD-PE, PS, ABS, TPE, PA, etc. The pressed products can be finalized directly in the production lines: cut to the required length, cut out, trimmed, and adhered with tape,...

...tufa, etc., which are crossed by passing electrical cables and/or technical tubes in general (gas, plumbing, etc.). Dust, soil, sand, loose parts, rust, and layers of paint of the pipes and old deteriorated sealant material must be removed with pressurised water or brushing, before applying the compound. The inner surface of the tube/hole containing the passing cables should be damp or wet. To...

...The connecting tubes cut to the required length can be connected to the ITAS extruded aluminum pipe fittings through a simple plug-in principle. No further mechanical processing is necessary. This minimizes the assembly effort. An internal tensioning mechanism and tightening special clamping screws ensure force-fit connections and smooth contour transitions. They are characterized by a pleasant...

... High temperature resistance up to +250°C doneHigh tear strength and low compression set doneExcellent electrical insulation properties More information Silicone rubbers have exceptional weather and UV resistance. Thus, can be used outdoors for longer periods without any change in its physical properties. Silicone rubber has excellent moisture and steam resistance. It can be immersed in cold, warm or boiling water for longer periods. This rubber can be extruded into strips, tubes, solid cord or any custom profiles.

...Flat bars, rods, tubes, and profiles made from extruded aluminum...

...The PEEK (polyetheretherketone) material is produced by PEEKChina in the form of standard semi-finished products for machining, extruded as sheets, rods, and tubes using the ARKPEEK® polymer. PEEK is a unique, semi-crystalline thermoplastic that offers excellent chemical compatibility. PEEK (polyetheretherketone) is a high-performance plastic belonging to the high-temperature materials category...

...BIEGLO offers polyimide tubes with inner diameters ranging from 2 mm to 100 microns. BIEGLO provides polyimide tubes with inner diameters from 2 mm to 100 microns. Our polyimide tubes are primarily used in the medical industry for catheters or neurovascular applications. Dexnyl polyimide tubes are extruded from thermoplastic polyimides and offer excellent pushability and trackability, as well as an extremely smooth surface and transparency. Compliance with USP Class VI (USP 6) is, of course, guaranteed.

...Extruded PTFE round rods, virgin, white, size range: Diameter 4 mm to 160 mm, manufacturing lengths: 1000 mm or 2000 mm Extruded PTFE round rods, ground Size range: Diameter 4 mm to 60 mm Manufacturing lengths: 2000 mm to 3000 mm...

...Cetavinyl® Heat-Shrink Tubes Construction: - Tube extruded from modified "PVC" compound. - Heat-shrinkable tube when exposed to heat. - Conforms to the shape of the object being covered. - Flexible tube. - For temperatures above 85°C (see Data Sheet C5). Uses: - Sheathing for electrical harnesses: automotive, automation... - Protection against corrosion, sealing, noise reduction. - Finishing, anti-slip...

...Form: Rectangular Tube Material: EN AW-6060 (AlMgSi0.5), 3.3206 Manufacturing Method: Extruded Condition: Solution Heat Treated, Warm Stretched Surface Finish: Anodized Standard: EN 755 eClass 9.1: 35020190 UNSPSC 11.2: 30102306 Dimensions: Thickness (mm): 2 - 3 Length (mm): 6,000 Height (mm): 20 - 30 Width (mm): 40 - 50 RAL Color: E6 Anodized EV1 Form: Rectangular Tube Material: EN AW-6060 (AlMgSi0.5), 3.3206 Manufacturing Method: Extruded Condition: Solution Heat Treated, Warm Stretched Surface Finish: Anodized Standard: EN 755...

...Transparent plastic tube, shipping tube, packaging tube, storage tube. Lightweight, durable, and stylish, it embodies the essence of an original communication product. Identify or showcase your product by customizing it with the addition of a cardboard tube or printing. Gatine Company: Manufacturer of spiral cardboard tubes, extruded plastic tubes, as well as die-cut cardboard caps and injected...

...Cooling Water Hose / Hot Water Hose Cooling Water Hose / Hot Water Hose, resistant to antifreeze. Operating pressure: 6 bar (ID 10 - 25 mm), 4 bar (from ID 28 mm) Temperature range: from -30°C to +100°C Inner core: EPDM, black, smooth Outer cover up to ID 25: EPDM, black, fabric-patterned Outer cover from ID 28: EPDM, black, smooth extruded...

...HEUTE + COMP. GmbH + Co. manufactures semi-finished products from high-quality raw materials for your products. Short lengths or rods and tubes up to 2 meters in length can be customized according to your applications and quantity requirements. Pressed and ram-extruded semi-finished products made from materials such as virgin PTFE, PTFE + glass, PTFE + carbon, PTFE + bronze, PTFE + graphite, PTFE + Ekonol, PTFE + stainless steel, and PCTFE E.

...Continuous surface inspection for all kind of products ZUMBACH's all-new SIMAC 40/70 is fulfilling today’s needs for in-line surface inspection of extruded products like pipes, cables and hoses with the consistent implementation of machine vision and machine learning. Defect detection The SIMAC detects anomalies and material defects that are difficult to detect, such as compounds that...

With many years of experience in plastic injection and extrusion, the MIP Plastic Group produces plastic parts in ISO 7 clean rooms for the medical and pharmaceutical sectors. This human-sized group has 4 production sites in the Northwest: MIP (Nord-Sarthe), PHARMAVAL Plastic, PHARMATEC Plastic, and NORSTICK (Eure). We produce plungers (plastic extrusion) as well as various medical devices (plast...