volume tests

... 2,000 bar and 10 Hz can be generated. With the test circuit for hydrostatic and burst pressure tests, pressure ramps up to 3,000 bar can be generated. It is operated on a support arm PC. For pressure tests according to EG79 / EU406 – Section 4.2 Pressure booster for additional supply Displacement volume max. 15cm³ Frequency up to 10Hz Pressure Load Changes as sine & trapezoidal curve...

...High-format test tubes, according to DIN 12681 (glass)/ISO 6706, with a hexagonal base. For use in laboratories, pharmacies, workshops, outdoor testing, and generally wherever volume measurement processes need to be carried out.

...Moisture content, loss on ignition – Particle size distribution – open porosity – Water absorption – Bulk density / Grain volume weight – Bulk density DIN 51081:2002-12 - Testing of oxidic raw materials and materials - Determination of mass change during annealing. DIN EN ISO 26845:2008-06 - Chemical analysis of refractory products - General requirements for wet chemical analysis, atomic...

...4 ml | IVD | Sterile Storage 2-12 °C Used for blood grouping tests. Reactant Red Blood Cells 3 ml, designed specifically for blood grouping tests with a volume of 4 ml, IVD class, and sterile formulation. Product Code: AKL-248...

... you with regard to your testing tasks and, together with you, transfer the entire testing process into a specification sheet. OUR OPPORTUNITIES 2-chamber system air-air Test chamber volume up to 130 liters Temperature range hot chamber 50°C to 200°C Temperature range cold chamber -80°C to -100°C Change between chambers <15 seconds Maximum test material weight 25 kg State monitoring of the test specimens during the test...

... amounts of warm air – for instance for blasting, coating and painting work or load tests? If so, the high-performance electric heating unit TEH 400 is our best recommendation: This hot air giant can withstand the harshest conditions whilst producing up to 9,000 cubic metres of hot air per hour at an air pressure of up to 600 Pa in continuous operation. Owing to this capacity, the high-performance heating device can transport hot air via air hose distances of up to 100 metres length.

... leaf coverage/ stomata flooding Promotes spray volume reduction Enhances the efficacy of fertilizers or pesticide in the field Applicable to many products thanks to wide range pH stability (2-12) It is recommended to use up to %2-5% as an IN-CAN adjuvant to pesticide or fertilizer formulations. It is recommended to decide after laboratory tests for optimum dosage and compatibility.When considering...

...demineralised and with a highly basic pH (to simulate conditions in contact with concrete). Expansion tests showed a respective change in volume of 300% and 250%. For underground concrete constructions with conduit pipes, where the wall is in direct contact with the ground and where there are no layers of waterproofing outside the masonry itself: basements, cellars, underground garages, below-ground and...

... be used for in-vitro diagnostic use only. The built-in centrifuge of the analyser and patented reagent cartridge structure make SimplexTAS TM system more accurate and reliable. Users can get lab-quality results from SimplexTAS TM as good as laboratory clinical systems. Its automated test process also enables users to carry out multiple simultaneous tests for 4 different samples around 13 minutes. The user interface with a large touch screen enables a variety of settings to be personalized. Patient ID or operator ID can be typed manually or scanned by an external barcode reader.

... ensure accurate and repeatable tests, an optional burner flame temperature verification kit is available. The HVFAA is the optimal instrument for conducting repeatable FAA flammability tests. Designed to be used for testing in accordance with FAA's Aircraft Material Fire Test Handbook DOT/ FAA/AR-00/12, Chapters 1.0 - 4.0 (FAR 25.853, 25.855, 25.1359) Draft-free large volume (>0.5m 3) flame chamber...

...Abingdon Health offers fixed-cost, automated lateral flow manufacturing (works to GMP and ISO certified) with the capacity to manufacture millions of rapid tests per month. Working with customers across multiple sectors, Abingdon Health can tailor manufacturing specific to assay and customer requirements. Our experience, established supply chain and streamlined processes and procedures, coupled with the use of state-of-the-art automated lateral flow manufacturing equipment, contribute to the output of high volume batches in accordance with schedules and budget expectations.

... ratio of 20mL of dye to 1L of water (that is, 1L for 50L of water). Squeeze the bottle to fill the graduated reservoir to the desired volume. Add the dye to a pre-filled container of water (bucket, basin...) and mix to achieve a fluorescent yellow/green color. Pour the mixture into the network through an inspection chamber, a sink, ... and locate the exit of the dye.

...Gas Analysis and Automatic Determination of (Bio)methane Potentials (BMP) - To ensure the effectiveness of biogas production, the biological methane potential (BMP) of a substrate must be known. With the Yieldmaster, BMP can be measured online, in parallel, and automatically during biogas yield tests. The Yieldmaster (BCS-CH4 biogas) consists of CH4 infrared gas sensors, precise gas volume meters...

...The MF5 (MF520 or MF570) is a perfect complement when certain specific parts are difficult to test with the F620 or F5200. Examples of applications: - High-volume sealing tests: agricultural tractors (complete axle), food barrels, tanks, reservoirs, boilers,… For more information: md@aduplom.be...

...For larger test objects, WKM can realize walk-in or drive-in test chambers as temperature or climate test chambers. There is the possibility to implement sunlight or corrosion testing components into the test stand. Furthermore, we can present storage cells specifically designed for long-term stability tests or for applications considering ATEX guidelines. Test chamber volume: from 2 m...

...among other applications. Additionally, we supply galvanized or coated versions manufactured in small and large series, in pre-assembled units that meet specific requirements for tightness, air guidance, material, and aesthetics. Simply ask us for relevant laboratory tests or performance certificates.

... measurements of large buildings with an envelope area of approximately 7,000 to 36,000 m² or an internal volume of up to 440,000 m³. As a modular system, the MultipleFan system can be used for testing larger industrial and administrative buildings, but also for single-family homes and apartment buildings using one or two BlowerDoor fans. ...

...High and low pressure range / 1 or 2 channels Pressure setting via regulator and volume controller down to 0.01 mbar possible Pressure bottle built-in or external Simple and safe handling Time and cost-saving handling for recurring tests Customizable to customer specifications...

...EIFIX CONFECTIONER'S EGG WHITE Stable consistency. Perfect volume. The confectioner's egg white is particularly high in volume, providing absolutely stable foams with great volume and is easily mixable. EIFIX CONFECTIONER'S EGG WHITE Stable consistency. Perfect volume. Practical tests in professional applications show that Eifix confectioner's egg white achieves significantly longer stability...

...LIWELL® MOBILE SCREENING STATION DESCRIPTION (according to attached plan U 911260) The station includes: • 1 screen LL 1.0 – 2.52 / 8 ED (screening area: 2.5 m2) • 1 hopper with a volume of 4 m3 • 1 belt extractor • 1 conveyor for screened materials • 1 conveyor for rejects from the screen • 1 generator • several sets of screening meshes The entire setup is mounted on a semi-trailer truck. Tests...

... electrostatic) services according to your request. Necessary quality control tests and leak-proof procedures are conducted on our products. I have attached relevant photos and our diagram file to the email for your review. Please feel free to reach out if you have any questions.

... breath tests, e.g. Helicobacter pylori test, liver function test, or measuring intestinal transit time. FAN ci2 is the ideal device for physicians’ office laboratories as well as for scientific institutes. Special features simple and save handling small sample volume (approx. 100ml) high performance (approx. 30 samples/h) high repeatability (standard deviation < 0.5‰) low servicing by internal...

...These devices are manually operated cabinet units - These devices are manually operated cabinet units of type M-SC for conducting condensate water tests (without harmful gases). K 400 M-SC / K 1000 M-SC / K 2000 M-SC cabinet units with 400/1000/2000 liters test chamber volume without ventilation. KB 400 M-SC a / KB 1000 M-SC a / KB 2000 M-SC a Cabinet units with 1000/2000 liters test chamber volume with ventilation automation.

...The Tamir Küçük Boxed Toy will capture your child's interest! They will have fun while playing and also learn! It consists of 15 pieces. Suitable for ages 3 and up. Produced with health-safe raw materials and paints under the assurance of Zuzu Toys, and all tests have been completed. Quantity per Box: 12 Product Dimensions: 370x90x245 mm Box Dimensions: 580x385x505 mm Box Weight: 7.46 kg Box Volume: 0.113 m3 Product Weight: 0.637 kg Gross Weight: 8.30 kg...

...Using computed tomography, we inspect your parts non-destructively for pores, voids, inclusions, and foreign materials. The position, compactness, defect size and volume, distance to the nearest defect, and the distance of each defect to a reference surface can be analyzed. Premachining tests indicate whether and how pores will be cut through before the component is processed. Error analysis...

... and mixing processes to be simulated and tested in only one appliance using different mixing tools. Therefore relevant comparisons are possible which facilitate the selection of the most suitable stirring mechanism or agitator tool for the product and thus for the future production equipment. Special properties for the customer’s benefit: Mobile and portable skid design Simple „plug and use“ installation Complete process unit with ancillaries Flexible filling volume 10 to 100% CIP-cleaning included All product contact surfaces heatable Suited for a wide range of processes Ideal for...

... by pressurizing the external volume of the product using the pressure drop method. Sealing tests for IP67, IP68, and hermetic characteristics can be performed using sealing test equipment that meets EP60- IP standards. Products that work with BT4000 Series devices are fast, reportable, and sensitive. - Eliminate uncertainties from the immersion method and scrap product costs. - Test reports generated in the desired format can be monitored remotely using IoT, transferred to a computer via USB, and analyzed in Excel format.

...Fireproof sealing products The tape made from isoTHERM® 800 is specially chemically refined, allowing for a higher temperature application than standard E-glass. This yarn has a large storage volume, resulting in good insulation values and flexibility. The greenish tint is the distinguishing feature of isoTHERM® 800. This tape has firm woven edges on both sides. Approvals / Tests SBG approval for fabrics Non-combustible (in accordance with DIN 4102)...

...The unit is easy to move around since it is compact and lightweight. 2. Compatible with 200 mL The volume of the pressure vessel is an easy-to-use size of φ50 × 100 mm. 3. Highly reproducibility Since the unit is driven by a unique servo motor, the setting pressure and pressure increase speed can be freely adjusted, allowing high reproducibility tests to be performed.

...Working at high pressure and high volume flow with the KAMAT Triplex plunger pump K45000-3G: particularly suitable for pressure tests of containers, pipeline stressing and pipeline testing. The K45000-3G focuses on hydraulic applications and jetting. In jetting, the 450 kW high-pressure plunger pump is often installed in large mobile systems. The K45000-3G plunger pump is particularly suitable...