thermal cleaning systems

...Dealing with VOC emissions in a facility often involves considerable operating costs, primarily for electricity and natural gas. However, an increased consumption of activated carbon can also add to the expenses. The exhaust air treatment systems are designed for a specific production operation, which often changes over the years, potentially leading to significantly higher operating costs for the exhaust air treatment system. With this offer, we assess the condition of the exhaust air treatment system and identify potential savings for you - often in the five-figure range per year.

...Thermal cleaning in the WIWOX® IGS thermal system at up to 500° C removes all organic residues, even from fine bores. Depending on the melting and decomposition point of the residues, they are either melted or pyrolysed. The resulting exhaust air during the carbonization phase is burned in the afterburner chamber at over 850° C. Cleaning in the pyrolysis process requires subsequent post-cleaning...

... fluid and oil purities — no matter how specific the conditions are. CJC® oil cleaning systems are renowned worldwide and are used in industry, shipping, mining, power plants, and wind energy systems. Our portfolio includes: • bypass filters • water separators • filters for heavy oil, quenching fluids, thermal oil • systems for the recovery of cooling lubricants • lubricating oil filters for gas engines / diesel engines • fuel cleaning systems, tank filters • dewatering systems for insulating oil and transformer pits • flushing filters...

...The exhaust gas treatment for inorganic pollutants, as well as the removal of hydrocarbons and NOx – just a few requirements that we can completely and reliably address for you. As your competent partner in environmental technology, we carry out the engineering of complete, turnkey exhaust gas cleaning systems. This includes, among other things, plants for Regenerative Thermal Oxidation and SNCR...

... desired level of cleanliness is maintained consistently while production processes can continue without any interruption. Nirafon acoustic cleaning systems are the most energy-efficient and save costs associated with unnecessary downtime in your facilities. They keep boiler rooms, superheaters, economizers, air preheaters, evaporators, filters, and fans in boiler rooms clean and prevent the buildup of particles in silos and cyclones.

... cycle-controlled. As additional equipment with degreasing / drying / preheating furnaces and vacuum locks. Pre- and post-treatment of heat exchangers: - Thermal degreasing of parts - Fluxing by spraying or dipping - Exhaust air cleaning systems...

... air volumes - Each compact unit for up to 10,000 m³/h - Total exhaust air volume individually adjustable - Modular design allows for any expansion of the systems - The TWINN 10,000 fits in an area of 10m², both indoors and outdoors - Designed for 24-hour operation - No lead times: switch on and ready for immediate operation - Durability through stainless steel manufacturing - Complies with the Energy Saving Ordinance - Comparatively low maintenance and operating costs - Made in Germany...

...Optimal removal of all organic pollutants: The perfect CTP solution for applications with particulate, sticky condensates or corrosive components in exhaust gases, as well as for aerosol treatment through special 4- and 6-bed designs: - Maximum cleaning efficiency - Flexibility in heat exchanger design - Flexible multi-bed design - Seat valves with block air - High safety standards - High availability - Low operating costs - Automatic adjustment to variable operating conditions - Many fuel options...

... GmbH. Once again, Trema Verfahrenstechnik was awarded the contract to supply essential components for two flue gas cleaning systems. The client is "Dynasafe," one of the world's leading companies in the field of "munitions disposal." The first system was successfully commissioned at a site in Alabama, USA, at the end of 2010. More information at: http://www.uxb.com/userfiles/file/Anniston-News-September-October-2010.pdf For this plant complex, Trema Verfahrenstechnik supplied the critical plant components high-temperature quench as well as acidic and alkaline scrubbers...

...We meet all your needs for any type of screening, recycling site work, or soil cleaning on site, mobile screens on wheels or tracks, electric, thermal, hydraulic, custom manufacturing.

...The Cor-Urban CC system with RPT frame is a window and door solution featuring concealed double opening, offering exceptional acoustic attenuation of 50 dB and ideal thermal insulation. This system allows for the insertion of a blind in the internal chamber created between the two frames, facilitating cleaning and maintenance. With a quadruple joint system, it optimizes thermal and acoustic performance, making this system an ideal choice for projects that require maximum insulation.

... deformations, lateral displacements, and vibrations, while simultaneously dampening and limiting the spread of noise throughout the installation. Expansion joints find applications in power plants, gas turbines, and in the chemical, petrochemical, paper, and cement industries. An increasing number of expansion joints are being used in flue gas cleaning and desulfurization systems. Our manufactured expansion joints are made from materials resistant to both high temperatures up to 1000 °C and aggressive chemical media. The operating pressure of the fabric expansion joint ranges from -0.2 to 0.3 bar.

... oil systems in the long run. Contaminations and deposits reduce flow and increase wear. In the worst case, defects in heaters, pumps, seals, and valves can occur. Additionally, the core function – heat transfer – is severely affected. The NESS fine filter stations continuously remove the smallest particles in a side stream, thereby increasing the service life of the heat transfer oil, as well as the operational safety and effectiveness of the system.

... silicate or lime putty. Sanastof is the breathable, low elastic modulus finish, recommended in all our dehumidifying systems carried out with: Sanatigh, Caleosana, Sanawarme, Unisan, Intosana. Application surfaces should be clean, free of soiling, crumbling and non-adhering parts, dust, etc. Smooth supports should be roughed (roughness > = 1mm). If after cleaning and roughening the support is still dusty...

...Always ready - Supply systems for primers and inks prepared for daily industrial demands — The best resistance to chemical substances — Excellent mixing capability of inks and primers — Prevents sedimentation — Increased autonomy through greater filling capacity — Optional cleaning function — Manual or automatic operation — Numerous accessories...

... dimensions of the machine: 690 x 480 x 445 mm Internal dimensions of the cleaning tank: 400 x 300 x 150 mm Usable dimensions of the loading grid: 370 x 270 x 80 mm Height of work surface: 360 mm Capacity of the cleaning tank: 20 L Power of the ultrasonic generator: 500 W (1,000 W p-p) Frequency of the ultrasonic generator: 28/40 kHz Thermal resistance: 1 kW...

...Partner for Dry Ice Cleaning and Dry Ice Blasting, e.g.: for Ventilation and Exhaust Systems Dry Ice Cleaning The cleaning process utilizes thermal stress to detach the coating from the substrate. The speed of the pellets that subsequently impact the surface then completely removes the coating. Therefore, the success is due to two factors: firstly, the thermal effect, and secondly, the...

...This is a high-performance synthetic motor oil designed to meet the needs of today's modern and powerful engines, offering superior cleaning power, wear protection, and fuel economy. It has been developed for engines that need to extend the lifespan of exhaust emission systems in both diesel and gasoline vehicles while maintaining their efficiency. It has been formulated to be fully compatible...

...Decoupling for the plastics industry, Stripping of paint hangers and production parts Decoupling of motors and stators Pyrolysis ovens for thermal cleaning processes - Industrial pyrolysis ovens for thermal cleaning are used in many areas of industry, such as in the recycling of electric motors, cleaning components from powder coating systems, or tool and mold cleaning in plastics technology...

... • Indirectly heated • For heating cargo tanks • Heavy oil bunkers • Settling and day tanks • Heavy oil preheaters • Trace heating • Separators AW Heat Exchangers and AW Water Heaters • For generating warm, service, and hot water for space and swimming pool heating • Tank cleaning • Used as emergency coolers in thermal oil systems • Lubricating oil and fresh water coolers...

...Complete aluminum painting facilities Thermal Ovens Powder Coating Robots Surface Cleaning Lines Conveyor Systems Dust Collection Systems Recycling Systems Wet Paint Facilities Wood Coating Facilities Automotive Industry Auto Painting Systems Anti-static Powder Coating Booths Dust Collection Systems Wet Paint Guns Powder Coating Guns...

... The data logger is designed to withstand the most hostile applications in the food industry. Its waterproof rating is certified IP67 due to specific thermocouple connections that protect against steam and water ingress, as well as the usual cleaning requirements. The logger can store up to 8 profiles before a final data download. The DATAPAQ temperature control systems consist of high-precision...

...The solutions are ideal for the thermal protection of any perishable goods, especially concerning food products and pharmaceutical specialties. The proposed systems are used to cover pallets, air containers, tanks, barrels, mobile carts, and anything else that requires their use. The covers can help protect a wide range of temperature-sensitive products from both rising temperatures during the...

... sludge drying Waste water treatment Landfill aftercare Specialpurpose solutions for the chemical industry Food industry In general at corrosive media, at risk of condensation, and especially high specifications for the pure gas Since 2018 we are working close with our sister company Airprotech Srl. from Magenta/Italy in the field of thermal exhaust air cleaning. Beside our core products our range of products in the field thermal exhaust air cleaning is broadened Airprotech is specialised in the development, the manufacture and the supply of turnkey plants for thermal cleaning...

... clearance fit more, filling accuracy can be achieved online cleaning and sterilization. Speed:10-30bottles/min Filling range:100-1000ml,350-2500ml,500-5000ml Measurement precision:±0.5% depends on the liquid Air pressure:4～6㎏/㎝² Power rate:no electricity required Net Weight:30Kg...

... and depends on the structural conditions. A single air-to-air heat exchanger already has efficiencies between 45% and 65%, and with cross-counterflow configuration (series connection), efficiencies can exceed 80%. An optimized arrangement can also lead to a self-cleaning effect for effective maintenance. A bypass can be integrated for frost protection and performance regulation.

...Thermplus System Cleaner is a high-performance cleaner specifically formulated to effectively remove carbon deposits, dirt, and residues from your heat transfer systems. This product prevents energy losses while restoring the efficiency of your systems and extends the lifespan of your equipment. It quickly and safely dissolves residues in thermal systems, and can be easily drained without the need for rinsing.

...In the field of strip systems, we have been active with our automation solutions for many years. Our automation spectrum includes systems for thermal and chemical treatment, galvanizing plants, various cleaning lines, and coating systems. For these plants, we provide complete basic automation, drive technology, as well as strip imaging with Speedmaster and strip control systems. Types of...

...Our heatrecovery systems heat fresh air with the thermal energy of exhaust air and can be placed directly on top of a stenter frame. This system can also be retrofitted for older dryers. The benefits are high energy savings which allow payback periods of less than two years, depending on the layout and process, highly efficient platetype heat exchangers with nonstick coating, optimum ease of...

... corrosion in the system, are also considered, and the heat exchangers are produced through special processes. In U-tube heat exchangers, the welding method is used in the tube bundles according to the pipe and welding material. In straight pipe systems, manufacturing is done using welded and machining methods, taking into account the type of fluid. Additionally, hydrostatic test applications are...