steel Switzerland

... KING BRINGS A REGAL SOPHISTICATION TO ANY OCCASION Each KING glass is designed to preserve the specific taste of each drink. For whisky or liquors, Irish coffee, tea or sake, the special thermic high quality stainless steel KING cup guarantees absolute enjoyment. Set the glasses down in an elegant manner with beautifully designed saucers to create a harmonious whole. Specific technology applied in...

...Our Proven Standard Conveyor Our conveyor, used across all industries for years, features a stainless steel frame. The widths are available to match our curve conveyors, ranging from 150mm to 2,400mm in 50mm increments. Lengths start from 100mm, with a maximum length of 35,000mm made from a single piece. The end rollers are also available in Ø 10mm and Ø 14mm. The belts can be constructed horizontally or inclined/declined. Belt scrapers and catch basins are available.

...ASCO CO2 Transfer Pumps have steel housings and long life shaft seals. The pumps have hardened steel gears and thrust washers to give long service life. The mechanical seal fitted provides leak free operation. These economical pumps need no lubrication and no daytoday maintenance. A unique design allows parts to adjust automatically for wear. Highest efficiency is maintained for a very long time...

...Electropolishing reduces micro-roughness while preserving macro-structures. This results in a fine deburring across the entire surface area, especially at edges and corners. Electropolishing, Our electropolishing processes, particularly riag EPol 880 and riag EPol 882, give stainless steel unique properties. Through electropolishing, micro-roughness is reduced while macro-structures are...

...Pickling stainless steel removes impurities such as welding scale, oxide layers, heat tint, foreign rust, and metallic components and organic contaminants pressed into the surface during mechanical processing. Only with clean, metallically pure surfaces can the passive layer, which protects the stainless steel from corrosion, be formed. Pickling results in a uniformly matte, whitish sheen on the surface.

...Our stainless steel pinch valve for unlimited applications in the pharmaceutical, chemical and food industries and everywhere where the highest demands are placed on material and durability. TriClamp ½", ¾", 1”, 1¼", 1½", 2" DN15, DN20, DN25, DN32, DN40, DN50 housing, not in contact with medium:stainless steel 1.4435 / 1.4404 Tri-Clamp:stainless steel 1.4435 / 1.4404 screws:stainless steel A4 sleeve:as selected...

As a Swiss carbide manufacturer, we are engaged in the production of blanks in small and medium series. Custom manufacturing and the production of complex series are part of our daily business. Thanks to our long-standing collaboration with our production experts and suppliers, we can offer complete manufacturing of workpieces. We provide options for eroding, grinding, polishing, carbide turning,...

BERGER technologie GmbH is an internationally active company based in Switzerland. We produce and sell worldwide #grinding machines for drills and #tool grinding machines and #LASERs for the metalworking and woodworking industries. As well as various custom #multi-spindle drilling heads for the metalworking and #woodworking industries. Our machines have been the benchmark for over 40 years when it...

Gewinde Satelliten Antriebe AG, your roll thread drive expert since 1982 GSA AG specializes in the production of high-precision roll thread drives (RGT). With the know-how gained over generations, GSA AG is now one of the leading internationally active manufacturers of roll thread drives and is certified as an innovative company with ISO 9001:2015 and ISO 14001:2015. Thanks to the hardening shop...

In over 70 years, Gebr. W. + H. Zaugg AG has built up a know-how that is unique. Only in this way can perfect products be manufactured that withstand today's technically demanding market. Innovation and precision are essential in mold making and injection molding. This is how we act and work every day to produce the best for our customers. The company Gebr. W. + H. Zaugg AG is a family business, ...

For 50 years, we have been a successful manufacturer of pneumatic vibrators and hammers. We are globally recognized as a pioneer in the use of aluminum housings. Highly qualified employees produce more than 40,000 vibrators annually. Production takes place using state-of-the-art technology in harmony with the environment and the highest possible safety standards. The best materials and the latest ...

...MPS Microsystems offers a complete range of high-precision ball screws for positioning under 5 µm. Mostly custom-developed, these screws ensure smooth and snag-free movement thanks to the high precision of their threading achieved through grinding. MPS Microsystems' ball screws are made exclusively of stainless steel and are equipped with double nuts that allow for fine adjustment of axial play...

... the safe side. Core competences of KASAG: Design, calculation, construction according to diverse regulations, pressure equipment approvals, such as PED (EN13445, AD-2000), ASME (U-Stamp), China Stamp (A1), TP TC 032/2013 (EAC) Manufacturing permits and knowhow for the delivery of pressurised containers, apparatuses, plants to almost all the countries in the world. Welding of stainless steel and special materials such as Hastelloy, Inconel, Duplex Comprehensive spectrum of non-destructive tests Surfaces that meet the highest standards ...

...made of stainless Inox steel with foot pedal. For Pacazur containers 30 - 60 liters. The Charinox pedal frame is the universal transport cart for the Pacazur containers. Particularly suitable in areas where hands-free operation is required. - Simple and lightweight design - Easy and secure installation of the container by inserting the handles into the holding pins - Stainless steel tubes to...

...Load capacity of 1,000 to 3,000 kg/m2 • Fireproof and non-conductive panels • Modular system 600 x 600mm • Adjustable floor heights • Galvanized steel substructure (pedestals, stringers, lateral braces…) • Grilles or perforated panels for air conditioning circulation • Accessories: steps, ramps, and panel lifts Seismic support: enhances the seismic resistance of the floor in this area...

...RealProbeTemp SensorResistivity: 100 Ohm at 0 °C TCR: 3850 ppm/K Tolerance: IEC 60751 class F0.15 Temperature range: -50 °C to +200 °C Dimensions: in round stainless steel housing, Ø 6 mm x 25 mm long Wires: 4x Cu/Ag stranded wire AWG 28/7, PTFE-insulated (2x red, 2x white), 385 mm long Furthermore, the 200 °C series can be customized to meet application-specific requirements, such as...

... 0.10 mm to 16 mm TOLERANCES: From h6 to h12, or as agreed upon DELIVERY FORMS: Various delivery forms are possible: wire in rings, on spools, coiled in barrels, or on crown stocks. Bar steel in boxes or according to your specific requirements. Do you have any questions? Feel free to contact us; we guarantee quick response times and comprehensive support.

...Electropolishing of stainless steel, parts from small to large, from matte to glossy. Depending on customer requirements, the inside can also be done.

...We enable improved cost-effectiveness through hard coatings. Our proven PVD coatings reduce tool wear, resulting in extended tool life. Additionally, they allow for increased cutting speeds, thereby enhancing productivity. These high-performance coatings are only a few thousandths of a millimeter thick, yet significantly harder than steel. They are applied to cutting, stamping, and forming tools, as well as for injection molding and pressing molds. Materials such as titanium, chromium, aluminum-titanium, etc., are used to create various coatings such as TiN, TiCN, CrN, AlTiN.

...Our forming technology is diverse. Drawn parts and deep-drawn parts are produced in a progressive die tool. Presses - 200 tons of pressing force. For many products in the metal goods sector, stamping and forming technology offers an extremely efficient manufacturing option. We typically produce formed components from coils with a thickness of 0.05 to 3 mm, processing various materials such as deep-drawing steel, stainless steel, aluminum, non-ferrous metals, or titanium.

... application, we design for you: - Composite columns with concrete casing - Composite columns with chamber concrete - Composite columns with steel casing tube - Geilinger columns® for maximum load capacity and ultimate slenderness.

...Most advanced exhaust systems made of metal, stainless steel, and plastic...

...Round wire rope with steel core for light to medium applications. Rope diameter from 5 - 32 mm Galvanized version Rope diameter from 5 - 32 mm 6-strand with steel core Flexible rope construction Applications - Manual and electric winches - Optimal for medium loads Wire nominal strength: 1960 N/mm² Minimum breaking force: from 16.3 kN Surface: Galvanized...

...Powder coating is a surface finishing process applied to metal parts such as steel, aluminum, or appropriately pre-treated steel components. In addition to its decorative properties, this type of surface finishing offers numerous other useful advantages: - Protection against corrosion and chemicals - High mechanical resistance and deformability - Environmentally friendly and energy-saving...

...For use in steel production, grain sizes of 5-15 mm are primarily required (nekafer® 15). The transport of lump lime is mostly done in bulk by rail. nekafer® 15 is used in the steel industry to remove impurities from the steel melt. The lump lime helps to better incorporate elements such as sulfur and phosphorus, as well as manganese and silica, into the slag. A reactive lime with as low a content of impurities as possible is desired.

...The 100 Cr6 steel rings manufactured by WIB are stabilized after hardening by annealing. As a result of this treatment, they can be used at temperatures of up to 150°C. They have a hardness of 60 to 64 HRC For applications operating at high temperatures or in order to reduce their sensitivity to shock loads, it is necessary to stabilize the rings at higher temperatures after hardening. It should be noted that such a stabilization will slightly reduce the hardness of the rings.

...Precise diameters on hardened parts can be achieved not only through grinding. For machining hardened steel, hard turning is more than just an alternative. Consult our specialists and find the perfect solution for your turned part.

... force and provide overload protection. The pins are mounted into machines in place of normal shafts and fitted with strain gauges, allowing them to produce a signal proportional to the measured load. Manufactured in Switzerland, Magtrol’s LB 2XX Series Load Pins are rugged with high resistance stainless steel and tight construction, designed specifically for use in harsh industrial environments...

...Stable in the pH range of 1-14. Resistant to hydrolysis and steam. Operating temperature from -76°C to +150°C. Very smooth surfaces (lower tendency to form biofilms compared to electropolished steel). Weldable with welding equipment for thermoplastics (300-315°C). Plant construction: Parts in machine and plant construction; lining of pipes, centrifuges, tanks, reaction vessels, mixer blades. Semiconductor industry: Due to its high purity, E-CTFE is preferred for contact with ultrapure water and process chemicals in the semiconductor industry.

...Our stock of readily available buckles includes various models that we have in different widths and designs. In general, the buckles are equipped with a wire pin, although certain models also offer the option of using a wider, stamped pin. All buckles are made of stainless steel and can be gold-plated or PVD-coated in various colors; we are happy to provide you with more information.