mounting structures

...The ground mounting system on concrete supports is suitable for rocky terrain where it is not possible to install pile supports. Mounting on the supporting brackets is considered the most practical and economical for standard ground mounting. Moreover, the base does not have a harmful impact on the environment during its operation. All structures are resistant to loads and comply with all...

... bearing contributes to make equipments more compact. 2. Complicated mounting structures are not neccesary thanks to the mounting holes provided to both innner and outer rings which make it possible to mount directly to the mounting surface without a housing or a pressure plate. ...

...GK profiles are designed for constructing structures using gypsum boards, primarily used by entities in the construction and assembly industry. Partition walls made from CW and UW steel profiles are known as lightweight frame structures. Single-layer ceiling grid – used in rooms with a maximum width of 4 m and a maximum area of 16 m². Hat profiles are intended for direct mounting of gypsum...

...Mounting systems for solar panels are versatile. For flat roofs, ballast, standoff, or fastening systems are common. Sloped roof mounting systems utilize the angle and are tailored to the type of roof. Ground-mounted systems use post-and-beam structures to optimally align the modules. All of these maximize solar energy harvest.

...Laminated wood from the chamber drying section 195x45 Mounting elements for frame assembly are included The parts are numbered, technical holes are present Fire protection treatment Step-by-step instructions Preparation: All parts are numbered & technical holes are present, which reduces assembly time & eliminates errors Delivery: Delivered piece by piece on Euro pallets, unloaded by one person, without the use of machinery...

... Rigid - non-foldable - in working widths from 1.50 to 4 meters. Hydraulically foldable in widths from 4 to 6 meters. * Break-proof in spheroidal cast iron * Extremely robust construction - * Available for front or rear mounting * Modular system – easily retrofittable: tine attachment for cloddy soils, 3-point tower for rear mounting.

... the use of standard plates in the application, and the work is initiated in production upon customer approval. It is a product certified for impact resistance testing at 2107 Joules. For unplanned work, on-site inspections are conducted, followed by appropriate project planning and installation. System height: 1200/2200 mm Board height: 1020/2020 mm Board width: 1000 / 1200 / 1500 mm Panel frame: 30*20*1.5 mm box profile (A-TYPE PANEL) Panel wire: ø 3 mm / 20*100 mm Standard panel color: RAL 9005 (Black) Post material: 50*50*1.5 mm box profile (POST TYPE A) Direct mounting type: Steel dowel...

...Personnel access bridges are designed to enable safe boarding and disembarking of individuals on conveyor belts during transport. The platforms are suitable for installation on conveyor belts of any parameters. Additionally, the platforms are equipped with structures for mounting limit switches, sensors, and electrical accessories necessary for maintaining safety. Transport speed: 2.5 m/s Belt width: 1000 mm - 1400 mm...

... • Countersunk screw with TX40 internal drive for flush installation Description and area of application • Split expansion body with anti-rotation locking system • For securing substructures for facades and roofs, doors, windows, etc. • Fassad is supplied as a mounting kit with screws...

... construction. The inputs (e.g. PLC signal gauge) and outputs in addition to the external control allow a zero compensation by trigger via proximity switch or fast alerting on passing of set point values. Industrial type connection and mounting techniques enable the user the adaption and integration in the existing mechanical and electrical environment. The excellent quality of measurement...

...Solar Energy Aluminum Mounting Systems...

...The KMH snow protection panel is designed for installation with a ground foundation or for mounting on a concrete base and is available in two standard versions or sizes. The KMH snow protection panel offers optimal sound insulation due to its perforated sheet filling (traffic noise is reduced), good splash protection in rain or snow, and excellent visibility - additionally, the 3M SOS sign...

... particularly important during the summer months. Drainage systems – helps in removing excess moisture, preventing water accumulation in building structures. Aesthetics and Functionality Available colors: white, black, and brown, as well as stainless steel, allow for an aesthetically pleasing integration of the grille into building facades and other external architectural elements. Installation using screws ensures a solid fit, which is especially important in areas exposed to strong winds or changing weather conditions.

... protected against rodent bites if necessary. To simplify maintenance work or inventory management, the probe head can be detached from the cable section, allowing for easy replacement without extensive assembly work. Features: — Nominal pressures: 0 ... 1 mH2O to 0 ... 100 mH2O — Accuracy: 0.25% / 0.35% FSO — Diameter: 35 mm — Good long-term stability — Separation membrane ceramic 99.9% Al2O3 — Integrated lightning protection 8 kA gas discharge arrester (8/20µs); 4 kV Surge L-L/L-E according to EN61000-4-5 Optional Features — Mounting accessories — Various sealing materials — Custom designs...

...The main purpose is to attach heavy structures to concrete, building stone and brick. It can be used for mounting to thin concrete partitions. The recommended load should not exceed 25% of the maximum (pull-out load). The recommended load increases in proportion to the increase in concrete strength.

... Viscosity range: 0.3 - 10 mPas Internal volume: 450 µl (without pump) Fluid connection: 1/4"-28 UNF Mounting parts: 2x M2.5x7 Filter: mesh wire filter, mesh size 10 µm, filter area 1.3 cm² Valve: 3/2-way-valve Wetted parts: stainless steel 316L, epoxy resin; static seals: FPM, optional: FFPM, EPDM; manifold adapter: stainless Dimensions (L x W x H): 40 x 58.8 x 46 mm (without pump) Weight: approx. 271 g (without pump) Remarks: * depending on pump...

... foundation settlement.TYPICAL USE Off-shore wind turbine foundations Bridges and piers Historical buildings Structural load testing Vessel and pontoon roll and pitch measurement Crane roll and pitch measurement Structural Health Monitoring FEATURES Biaxial High accuracy and resolution Excellent thermal stability 4-20 mA current loops for signal immunity and potentially long cable runs Enhanced surge protection Internal temperature sensor for residual thermal drift compensation Two models for horizontal or vertical mounting Easy to install...

... installation of steel idlers, refer to the “Fixing rollers to structures” section on page 11.For the correct installation of motor-driven rollers, refer to the “Fixing rollers to structures” section on page 68. The diagrams and Table 60 show the shapes of the ends of the axles envisaged in TECNORULLI production’s “Monobloc steel rollers” programme.On request, other forms of connections and rollers with hubs can be considered.

...Very durable cast iron structures resistant to impacts, equipped with mounting holes, in which the most suitable bearing for the required application is installed.

... overhead cranes, they can be easily integrated into existing or new hall structures through various installation options, ensuring maximum functionality, flexibility, and user comfort at all times. The ABUS accessory program also offers a wide range of special equipment to realize specific solutions. ABUS double girder overhead cranes are available in the design as ZLK with welded box girders. All profiles of the main and trolley girders are computer-optimized, thus combining maximum performance with low self-weight. Advantages that...

...The Magtrol KG-06 Extensometer is designed for measuring deformations of construction or machined parts under load. Because its output signal is proportional to the applied load, it can be used as either a load cell or a force transducer. The KG-06 Extensometer is ideal for strain measuring where large transducers are not suitable. Its small dimensions and flat mounting allow for easy control of deformations on steel structures. Strain transducer, impedance: 1000Ω Protection class: IP65 Compact dimensions: 6.5mm height...

...Thanks to the ball housed in a concave washer, the connector can be turned to the desired position and secured with a single screw. The ball joint cross connector can also be retrofitted to existing structures to reinforce or extend them.

...aluPLUS is a modern die-cast aluminum enclosure designed for electrical and electronic applications in industrial settings. It is available in standard industrial sizes for mounting terminals, printed circuit boards, or mounting plates. The areas of application are numerous. aluPLUS is suitable for both free wall mounting and for use in industrial electronics and machine structures. The lid...

...With the profile series: Aluprofil 45, MiniTec offers you aluminum profiles of the highest quality. The Aluprofil 45 R 90° is ideally suited for lightweight constructions. For tables, display cases, or other lightweight structures, the Aluprofil 45 R 90° is optimally usable. With MiniTec's profile technology, the aluminum profiles of the profile series 45 can be easily connected. Connecting is also straightforward with accessories such as profile connectors, mounting angles, or connection connectors.

...Mini freight lifts are a solution for companies looking to improve their efficiency and speed. Their applications are diverse, and they can be configured as: Mini freight lifts for stores Book lifts for libraries Medication lifts for hospitals / pharmacies Document lifts for offices The option to choose between wall-mounted or freestanding structures allows for easy integration into existing...

...It is the most important basis for ensuring that your solar system lasts a long time and can pay for itself. We plan and manufacture supporting structures to install solar panels on any type of roof or free-standing surface. The construction is entirely based on the requirements of the location and ranges from profile rails and roof hooks to connecting and mounting elements and the right supports and beams. ...

...The ISOROHR® system is designed to bear tensile loads and is used for suspending metal structures from ceilings. With the ISOROHR® system, fans, blowers, air conditioning units, and pipes are mounted to the ceiling. You...

...The ALT W72 system is a universal integrated system that allows producing windows, doors and complex structures in modern energyefficient buildings; various kinds of structures that require increased thermal and sound insulation performance. This system has mounting depth of 72 mm and a thermal break with width of 34 mm. Thermal and sound insulation performance is increased due to additional...

... manufacture high-quality galvanized antenna mounting brackets that meet international galvanization standards, providing excellent corrosion resistance for long-lasting performance. Our brackets are designed for easy installation and adjustment, offering flexibility in positioning the antennas for optimal coverage. We also ensure that all connection elements—such as bolts, nuts, and other fasteners—comply with industry standards for strength and durability. Whether for new tower installations or retrofitting existing structures, our antenna mounting brackets provide a reliable solution.

...Hotdip galvanized steel mounting kit for Rec15/25 frontal and lateral pole installation. Mounting kit is applicable for all types of wooden, concrete or metal single poles and Hpole structures. Kit could include accessories for control cubicle pole mounting and up to two voltage transformers installation. Applicable product:Rec15_AI1_5p, Rec25_AI1_5p...