installation of suction systems

... protective enclosure and the suction nozzle. Supported operating systems: Windows, Linux External dimensions X/Y/Z: 1116/690/570 mm Weight: 41 kg Travel paths X/Y/Z: 720/420/110 mm Maximum clearance height Z: 103 mm Clamping area X/Y: 1110/510 mm Ø trapezoidal spindle of all axes: 12 mm Ø guide X and Y: 22 mm each Ø guide Z: 16 mm Pitch of the trapezoidal spindle: 6 mm Maximum working speed: 3000 mm per minute Maximum travel speed: 4000 mm per minute Repeat accuracy: 0.01 mm Backlash: approximately 0.03 mm Resolution (programmable): 0.003 mm...

... perfectly suited for industrial suction systems or small carpentries. They work well for the suction of wood chips, PVC, metals, or welding fumes. Finally, they are available in diameters ranging from 80 mm to 350 mm. SKU: tmj-140 Dimensions: 140 mm...

... done quickly and easily thanks to its high delivery capacity. Of course, the TWP 4025 E submersible pump is also suitable for transporting clear water. Medium: for wastewater Operation: electric Suction: self-priming, submersible Installation: mobile Protection level: maintenance-free Other features: robust, for wells, waterproof...

... mm in Fe Available in versions: MESEP, DIGITAL+, M-PULSE Maximum flow rate: 3300 l/h Other metal particle detection systems: Flat detectors for installation under or above conveyor belts Detection tunnels on conveyors Annular detectors Separators Special designs Pulsotronic manufactures: Inductive and capacitive sensors Devices and lines for metal detection and separation Image processing systems Magnetoresistive sensors Optoelectronic sensors and systems...

...Tecnosida® designs its systems based on the needs of its clients. For this reason, the implementation of the systems is preceded by a thorough technical inspection conducted at the client's facility by highly specialized personnel. This operation allows us to offer the best technical solution and propose attractive economic offers capable of satisfying very diverse production realities. More information: https://www.tecnosida.it/1101/servizi-progettazione-engineering-impianti-ecologici-aria...

... radially and form an anchorage area of 400 mm in diameter. This method of connecting the two sides of the structural sandwich requires low-invasive preparatory operations, being easy to carry out and consequently resulting in low installation costs. The Armaglass Connector Twin is used to reinforce masonry, arches and vaults in brick, tuff and stone. It is used as a through-connection for joining two...

...Magnetically Coupled Unlike standard pumps, these products feature a contactless magnetic coupling. An oil leak from a wear-prone conventional shaft seal is excluded in these models. Applications * - Installation in analytical devices * - Installation in flywheel energy storage systems * - Gas technology Customer Benefits * - Space-saving and ideal for system integration * - High suction...

...— Water treatment for steam boiler systems — Prevention of corrosion in the boiler — Outstanding deaeration efficiency and reduced consumption of chemicals with WSM-V complete deaeration system — Partial deaeration module WSM-T for small systems — Fast and easy planning, installation and acceptance appropriate to the steam boiler in question — Requirement for positive suction head allows for ground-level installation and easy commissioning...

... pollutants at the source, MP Filter designs capture devices with the following characteristics: • A location as close as possible to the emission source, as air velocity drops quickly with distance from the suction point, thereby reducing system efficiency. • A location as close as possible to the products and tools used. • An installation directed towards the flow of pollutant emissions. • Enclosure of the polluting operation and mitigation of leaks...

...The extraction arms from ESTA capture welding and soldering fumes, dust, gases, and vapors right at the source. They can be connected to a central extraction system via piping or fans, and can be flexibly and easily positioned within their reach using gas pressure springs. Thanks to the external construction of the support, the airflow is not obstructed, ensuring effective extraction at all times. We deliver our extraction arms fully assembled. This saves you valuable time and eliminates unnecessary errors during installation.

...The suction systems and the body design are designed to ensure that the powder coating does not escape from the cabin. When constructing these cabins, which can be easily disassembled and installed, powder-coated sheets, stainless steel, or plastic materials can be used as needed. Ex-proof motors, inverter motors, ex-proof lighting, and fire extinguishing systems can be integrated into the...

...On Aspirteam, you will find universal sockets that fit perfectly with your installation, regardless of the brand. All you need to do is choose the right color from those available for the series corresponding to your electrical system (BTicino, Vimar, Ave, Legrand, Gewiss, etc.), and once you have removed the faulty or damaged socket, you can install the new one. Our sockets are compatible with...

...Your benefits Can be mounted on the pressure or suction side of a pump Space-saving installation, because no straight inlet/outlet sections are required Flexible mounting of the meter in horizontal, vertical or inclined positions Accurate measurement result, since the reading is independent of the temperature and viscosity of the fluid Minimum failure costs due to simple function monitoring...

...The ANTARES 100 filters represent, due to their compact size, ease of use, and operational efficiency, the true solution to the problems of suction and filtration of fumes arising from various industrial processes. Designed according to modern technology standards, they cater to those sectors of industry and craftsmanship that require easily installable suction and filtration systems...

... process with highly precise multi-stage cutting ring systems. Established processes and a specific energy input independent of batch size guarantee excellent and stable results. They can be easily transferred to production scale – easy expansion to ystral installations. The modular design allows for expansion to the PiloTec-Plant process installation with ystral mixing technology, powder and...

... solutions available: - Suction hood, - Suction wall, - Enveloping cover, - Pouyès ring, - Hood. Depending on the pollutants, capture devices can be made from various materials: galvanized steel, stainless steel, corrosion-resistant plastic to perfectly adapt to your workstation and the products being handled. Your AWITECH contact will be your preferred partner for the design of the capture systems.

...Central filter systems of the PFS series for free-standing installation without duct connection The filter systems of the PFS series draw in contaminated air from the lower area and return the cleaned air to the workspace above through specially designed long-throw nozzles. There is no need for a costly suction and return air duct system. The induction effect of the air discharged near the ceiling pulls the warm air (heating air) that would otherwise accumulate there into the workspace, resulting in significant savings on heating costs.

...piSAVE® restrict The suction flow limiters allow suction cups to miss objects while still maintaining a sufficient level of vacuum in the system. They are suitable for handling airtight objects of various sizes with the same gripping hand. Flow limiters should be used on centralized vacuum systems, with one limiter for each suction cup. Using these limiters allows for the use of smaller vacuum...

...Complete filter system, EcoCube 5.5 KW extraction with blow head, blow plenum with long-range nozzles, suction ducting, measurement and installation with commissioning. This system is very well suited as an air handling solution for workshops or hall areas with a hall volume of up to 900 m³. For example, this could be a hall area of 18 x 10 x height 5 m. This extraction system, which features...

... the impeller easy. MATERIAL The complete unit is made of electrostatically powder-coated DKP black sheet metal. The radial fan is produced from DKP black sheet metal with a forward inclined sparse blade structure. SPEED CONTROL Can be provided optionally with a frequency inverter. AREAS OF USE Used for cooling in ovens, various heating-ventilation systems, and electronic equipment where low operating speeds are required and vibration is undesirable. Upon request, square-bodied fan manufacturing is also available, facilitating production and installation.

...) Vacuum chamber (volume): approx. 2 - 3 liters Vacuum chamber (closure): lid, hinged door Gas supply: Needle valves / Mass flow controllers (MFCs) Pressure measurement: Pirani, Capacitive manometer (for corrosive gas version) Generators: 40 kHz; 100 kHz; 13.56 MHz; 2.45 GHz Electrodes: One or multiple levels Control systems: Semi-automatic, Rotary knob, Basic PC, Full PC Power supply: 230 V / 400 V / 50 - 60 Hz Vacuum pumps: Suction power: 3 m³/h...

...storage) via road, rail, maritime, or river transport. Installation of wastewater and stormwater networks, implementation of irrigation systems. Lifting capacity: Diameter from 14 to 58 inches Length up to 17 meters Maximum load 5 tons Compatible with all hydraulic excavators and overhead cranes, through various interfaces and motorizations (electric, thermal, hydraulic).

...Each version is also available with floor suction pan, available with an integrated 2-stage filter and grating cover. Accessories In addition, the spray wall can be equipped with various accessories from the Rippert product range, such as explosion-proof lights, energy-saving flaps, turntables, etc. We recommend the installation of a supply air system for the replacement of the exhausted air...

... large amounts of pollutants and at greater distances from the source of pollution. This absorber outperforms all fixed installation extraction systems, and workplace design remains flexible. Connection values: 220/240V 110W Air flow rate: 650m³/h Operating noise: 42dBA Housing: Anodized aluminum, Dimensions: 445x260x55mm...

...Through vertical suction from below and installation outside the building. The exhaust air is expelled vertically upwards, minimizing the deposition of aggressive substances on the roof. Roof fans are suitable for the extraction of digesters in buildings without central ventilation systems. They feature internal motors that are separated from the airflow. The flow rate ranges from 50 to 3,500 m...

... secondary nozzle. A silencer or exhaust duct can be optionally connected at the outlet. - Basic ejector with diminishing blow-off - Ejector boxes - Basic ejectors - Heavy-duty ejectors Application Examples: - Handling of lightweight parts - Pick & Place applications - Separation systems in sheet metal or plastic manufacturing - Handling of electronic components...

...The flexible articulated arm is stabilized by a gas spring, providing excellent shape stability. Connection to central extraction systems is easily achievable. Various ceiling, wall, and table consoles in different sizes are available for easy installation. In the ATEX version, the laboratory extractors are suitable for the removal of gaseous contaminants in explosive environments, such as in the chemical, petrochemical, and paint and pharmaceutical industries.

...The grinding work cabins are designed for sound insulation and can be equipped with suction systems through suction slots. Thanks to the modular construction, almost any size is possible. Swing doors, sliding doors, or viewing windows are also available. The individual elements are clad on both sides with galvanized sheets. Available in either perforated or smooth versions. The filling consists of compressed mineral wool (170 kg/m³). With a simple assembly using mounting profiles, which are partially plug-in, the installation effort can be kept low.

...Suitable for all THOMAS central vacuum systems. THOMAS pipe set for 4 suction points includes HT50 pipes: • 24 pipes of 1m Ø 50 mm • 18 elbows at 45° Ø 50 mm • 4 branches at 45° Ø 50 / 50 mm • 5 sliding couplings at 50 mm • 1 lubricant 500 ml • 4 installation sets (installation frame and siphon elbow)...

... versions, filling is done through the integrated compressed air conveying technology with Venturi suction lance(s). Quality Dust in granulate reduces the mechanical properties of engineering plastics, leads to surface issues in visible parts, and results in high scrap rates due to streaks or white/black spots in transparent injection-molded parts. By professionally cleaning the granulates, the...