aluminium shapes

... PERGOLAS OF VARIOUS SHAPES AND SIZES, WITH WIND AND RAIN CONTROL SYSTEMS, FIXED OR ADJUSTABLE SLATS, WITH OR WITHOUT MOTORISATION, WITH LIGHT STRIP, WITH SIDE CURTAINS IF NECESSARY ...

...A hinged system with a 70 mm frame depth and a maximum glazing capacity of 40 mm. Its 5 chamber profiles both in frame and sash affords it great energy efficiency with transmission values from 0.9 W/m²K, converting it into an ideal large window to guarantee compliance of the most demanding norms that are applied to whatever climatic zone. It has two sash design shapes, bevelled and straight. Maximum glazing:40 mm...

...Novelis has created the first flat-rolled, aluminium-intensive electric vehicle battery enclosure designed for mass production vehicles. Learn more by downloading the product fact sheet. By utilizing Novelis’ highly-formable alloys, the battery enclosure provides automakers the ability to achieve deep drawn, complex shapes tailored to specific vehicle design requirements. The lightweight, high...

...Optigreen Aluminium Planter for installation outdoors on roof areas or in earthbound open spaces and for installation indoors. Planter made from aluminium in standard and custom sizes with overflow, insulating cladding, and, where required, with welded junction plates as reinforcement. On request, available with automated irrigation unit and water level indicator. Material:Aluminium Nominal thickness:3 mm Weight:depending on the size Length:400/600/800/1,000/1,200 mm Width:400/600/800 mm Height:400/600 mm round Diameter:400/500/600 mm Custom shapes and sizes on request...

...It provides shading of modern buildings while providing people with sufficient daylight without eliminating visual contact with the outside world. It is also used for decorative purposes. It has a wide range of products in different shapes and sizes, as well as an aesthetic appearance. It provides the designer with the opportunity to work thanks to the possibility of special production depending...

...At PACS we have a wide range of aluminium containers (different shapes and diameters) for your projects. Together we design and manufacture the best solution according to the desired content and the gas required: Liquefied gas or compressed air (Bag on Valve). Available capacity: • 50 ML • 75 ML • 100 ML...

...Automatic cut-off saw with 450 mm disc, designed for the cutting of aluminium and PVC profiles of different sizes, angles and thicknesses. Thanks to the servo movement system and the loading robot of servo-controlled profile, the heads of the LEO Plus provide automatic positioning on all intermediate angles between -22.5° and 45° in addition to providing A perfect and fast cut. Automatic horizontal and vertical grippers of the LEO Plus increase cut quality and prioritize safety.

...Like all Multilevel aluminium door models, the 501 is characterised by a rich three-dimensionality and a variety of shapes. The finely-textured dark grey colour complements the colour of the dark aged-wood decor. Under the rectangular, full-length Altum handle is the discreet LUX ambient lighting, which will magically illuminate the surroundings of your entrance, especially at night. We recommend fitting a PrivilegeLux cylinder guard with a pre-installed SECURO fingerprint scanner.

...For more than ten years, Meface manufactures durable aluminium nameplates in custom shapes, variety of metal thicknesses and surfaces (Matte, Satin/Brushed, Glossy). Your nameplate, it matters. It’s what the world sees before it comes face-to-face with you. What inspires more confidence: a mass-produced plastic name sign or a crisp, ultra-high-quality anodised aluminium wall or office door...

...Static painted aluminium frame and motifs Brushed copper stainless surface UV printed lettering and shapes Can be produced in desired sizes ...

... higher the specifications of the mirror the better the signal for it to produce a better transmission or reflection curve that it relatively to the sample. For more information read PDF… Material::Soda lime float glass, white plate, BK7 or equivalent Diameter Tolerance::+0/-0.2mm Lengths/ width::±0.3mm (≤100mm), ±0.5mm (>100mm) Thickness::±0.25mm Surface quality::<60-40 scratch/dig for general purpose, <40-20 scratch/dig for λ/4 Flatness:: λ/4 for polished substrates Parallelism::<3 arcmin Coatings::• Enhanced aluminium 94%R for visible applications.

... highest quality of services. Marxam Project is a company dealing with professional and comprehensive metal processing, with particular emphasis on CNC milling. This method is particularly popular with our customers due to the possibility of obtaining various shapes in a quick and repeatable manner. Our experienced technologists have the knowledge and advanced equipment to ensure that we can handle any task. Trust our milling and experience the highest quality of services at attractive prices.

... wide range of colours (anodising, powder coating), noble shapes and surfaces (brushing, grinding, polishing, blasting) and high-quality individualisation (screen printing, pad printing, under-anodising printing, laser engraving, etching techniques) at your disposal. In addition to the production of individual parts and the manufacture of complex assemblies as well as end products, we also offer you as a system supplier the complete project planning for new developments. Our portfolio includes: Automotive door sills Interior visible parts, e.g. side applications, decorative panels and...

...To mount leveling feet, rollers, hooks or similar components; connects to the profile sideways Various shapes and designs on request Material: Die-cast aluminum, Aluminium die-cast Surface: Plain, black powder coated Specials: Other surfaces, other colors on request...

...We offer direct UV print on dibond. Custom formats and shapes available. High-resolution, fine art, solvent-free pigment printing. Intense colours thanks to large spectrum of colors. Dibond is made with stable, rigid aluminium composite sheet that comes in white. 3mm thick. Printed single-sided. Drilled holes available. Direct prints on dibond are perfect for long-term use, as they are weather resistant, attractive and durable. Matte surface and no glare. For indoor and outdoor use.

... next to a major European motorway, Aluminium Ferri ships its products to all countries in Europe and around the world under the best conditions. Since 2014, Aluminium Ferri has had a subsidiary located in Nantes, Goiot Systems. The synergies between the two industrial sites expand the range of solutions offered to clients.

...which shapes the interior of the tube. In comparison, when we extrude a tube using the bridge spinning process, the mandrel is fixed and held by several support arms – the bridges – inside an extrusion tool.

... of sizes and shapes of component. In addition it can be readily joined to metals or other ceramics using metallising and brazing techniques. Alumina based ceramics are by far the largest range of advanced ceramics made by INNOVACERA. Due to the important combination of properties, we have thoroughly researched the behaviour and characteristics of our Alumina products to give you the best possible component. Typical Alumina characteristics include: Good strength and stiffness Good hardness and wear resistance Good corrosion resistance Good thermal stability Excellent dielectric properties...

... colors and structures. excellent thermal insulation; long service life; a wide range of patterns, RAL palette colors and wood finishes; ecofriendly; provide high water resistance; aluminium allows you to create doors of various sizes and shapes...

...Pleated blinds are slim, elegant and discreet. As they are made to measure, they are a perfect fit blind. A strong aluminium headrail supports fabric, that concertinas into aesthetically pleasing 20mm wide pleats, giving a beautifully pleated pattern to windows of all shapes and sizes. Pleated blinds can be simply raised or lowered to the desired position, with either a cord locking mechanism...

...money and hassle as it eliminates the long process and any production issues that can occur, while providing a visually enhanced product. Our five perforating machines can perforate stainless steel, titanium and aluminium tubes from 38mm to 101.60mm⌀, in lengths up to 750mm long. The specialist tool design allows tube perforation in various patterns that can be tailored to produce bespoke and unique patterns and shapes.

...Aluminium cladding ensures high resistance to weather conditions Aluminum cover in modern shapes: Quadrat or Quadrat FB Available in more than 30 colours of aluminium, and RAL colours...

...Email : trasmme@gmail.com SKYPE : TRAS MM ============================== MAGNESIUM INGOT The proportion of magnesium alloy is the lightest among all structural alloys, so the weight of aluminum or iron can be reduced without reducing the strength of the parts. Smelting from minerals into metals is mostly made up of raw embryos of various sizes and shapes. Magnesium Alloy Casting...

...The demand of aluminium profiles to furnish the HoReCa industry as well as Department Stores with particular sizes and shapes has considerably increased over the last years. The calendering of profiles used in the construction or in the realization of the most modern refrigerated showcases for cafés, ice-cream parlours or restaurants requires special attention for the aesthetics of the profile.

...Abkant bench is a kind of press machine used in bending or folding metals. Today many computerized Abkant machines are available. It has improved production by making it faster, saving time, and with respect to shapes. Cylindrical, conical, elliptic and oval materials may be produced by Abkant bending process. In selecting Abkant press, length, thickness and type of the material to be folded...

...Designed and manufactured by Servi Doryl since 1972, the trays allow a peripheral draining by means of transverse grooves. They can be used with a draining mat and are suitable for mechanised lines. Max. dimensions : - Length (stainless steel) : 995 mm - Length (aluminium) : 1100 mm - Width : 600 mm - Thickness (stainless steel) : 1.2 or 1.5 mm - Thickness (aluminium) : 3 mm Range:- Single-sided trays - Double-sided trays Materials:Stainless steel or aluminium Use:Moulding and draining of cheeses in moulds, block-moulds of all shapes...

...Warm and pleasant with super quality Euro 70 PVC windows are ideal for high quality residential buildings where energy saving is an important part of the beneficiaries’ preferences. Featuring distinctive profiles, high quality surfaces and a particularly elegant appearance, PVC windows come in a variety of shapes and colours, and with the help of aluminium caps can be perfectly integrated into any façade system.

Ningbo Jintian Copper (Group) Co., Ltd. (abbreviation: Jintian Copper, SSE stock code: 601609) was founded in 1986 and has focused on copper processing for more than 30 years. We are the world's leading supplier of copper and copper alloy materials. We are committed to providing comprehensive copper product solutions for the development of strategic emerging industries such as 5G telecommunication...

...We don't just produce cut shapes. We refine them. Discs, rings, plates, or profiles – no problem for Mastel Aluminium Semi-Finished Products GmbH.

COLORICIO SRL is a company based in Romania, specialized in logistic services since 2013. We work in several sectors such as salt, metal, construction, and transport. We supply different types of salt including de-icing salt, salt tablets, industrial salt, edible salt, and pharmaceutical salt. We carry out strict controls to ensure the quality of our products and are proud to be certified accordin...