structural concrete

... grouting, both resinous (epoxy, polyester, vinylester) and with mortars and grouts based on aerial or hydraulic binders. Armaglass Connector L is used to mechanically connect our ARMAGLASS networks to various supports (brick walls, stone walls, concrete, wood). It is an extremely durable connector, even when applied on alkaline supports, with high salt loads or when exposed to severe exposure...

...Formwork for pillars and bridge beams plays a crucial role in the construction industry, especially in the realization of bridges and other large concrete structures. With customized solutions, complex architectural designs can be implemented while ensuring structural integrity and safety. Customized formwork systems for bridge pillars offer numerous advantages for construction professionals. They not only allow for precise adaptation to the specific requirements of each project but also enable efficient and time-saving construction processes.

...The ground mounting system on concrete supports is suitable for rocky terrain where it is not possible to install pile supports. Mounting on the supporting brackets is considered the most practical and economical for standard ground mounting. Moreover, the base does not have a harmful impact on the environment during its operation. All structures are resistant to loads and comply with all...

... of a building. Connecting the ceiling or floor with with an outsidecorner, for example on a chimney, is the most important part. No measuring and cutting needed! Take out of the box and apply our solidian corner 3D out just like that. Strong carbon fiber reinforcement mesh Up to seven times higher tensile strength compared to structural steel No corrosion so it’s very durable Our special...

...Axinar has designed and produces, solar panel stands and mounts for various applications. The structural elements are designed to be adaptable to different soil conditions and flexible in the construction space. Upon request, the base can be adjusted to any desired angle. ...

... with a bottom cone, the cement silos are strong and well-built to bear the weight and pressure exerted by the stored cement. These 60-ton welded-type cement silos are best used for cement storage in huge quantities, and at the same time, the controlled gauge pre-fabrication of cement is needed when producing concrete. This makes it possible to store huge amounts of cement—60 tons—which in turn lowers the frequency of refills and optimizes the logistics cost of cement transportation. Silos are welded on the structural integrity and to minimize insemination and contamination chances.

...There are several reasons why steel structures are preferred over reinforced concrete structures. The main reasons are fast generation and seismic resistance. Steel structure reduces loss of life and property during disasters and ensures safety. Metallurgical facilities, industrial buildings, sports facilities, hangars, warehouses - these are structures in which metal structures are often used...

... lightweight structural concrete in general. It does not adhere to metals but protects them if completely enveloped. To be used for structural pours indoors and outdoors, for general concrete with lightweight and high resistance characteristics, for collaborating pours on beams/brickwork, concrete blocks, and wood. Available in quick-drying type “R”. Certified production process FPC 0925.

...Superplasticizer for concrete with improved surface finish and high early strength, preferably in the precast plant, e.g.facade elements, structural elements, retaining wall elements, steps etc. Strong increase of workability and/or reduction of w/c-ratio, good homogeneity even with low amounts of fines in the mix.

... construction investment, providing a cost advantage from 18% to 30%. Since the use of columns and beams eliminated with the Rack Clad Building Systems, more space gained. Since the Rack Clad Building Systems are in demounted structure, it can easily be mobilized to another place and assembled. Corridor distances in building-free racking systems can be altered depending on type of loading equipment used. In the Rack Clad Building Systems, concrete is applied on the land/ shelves are xed on it, then exterior su ace is constructed by the facade covering (sandwich panel).

...Painting and surface restoration are essential tasks for preserving the beauty and functionality of both indoor and outdoor spaces. Regular painting of walls and exterior surfaces not only enhances their appearance but also extends their lifespan by protecting them from corrosion and deterioration. Additionally, restoring damaged surfaces, such as cracks or holes, prevents further structural damage and ensures the safety of the environments.

... mm; lengths typically vary between 6000 mm and 12000 mm. 3) Materials: Commonly used materials include B500A, B500B, and B500C. 4) Usage: Reinforcing steel is primarily used for reinforcing concrete in structures such as bridges, buildings, and roads. The exact specifications depend on the specific requirements and the structural conditions.

... construction have reached a high market share in not only industrial buildings but also residential and commercial buildings, where the main advantages include: construction pace, high quality, reliability and longevity, and space usage. The majority of structural steelwork is manufactured in the steel contractor’s workshops with very little on site work required which leads to fast construction times. Unlike concrete, steel frames gain full strength when their fabrication is completed, allowing the following construction trades to continue.

...Hot rolled angle is in demand and applicable in mechanical engineering, construction and in everyday life. It is used to make Concrete supports; Mounts; Brackets; Arches; Ladders, stepladders; Wall partitions; Armored doors; Fences and fences; Sports equipment and exercise equipment; Children's playgrounds (playgrounds); Lifting equipment; Steel structures ; Parts and assemblies...

...For connecting multi-channel (floor, wall or ceiling) electrical conduit or armored cable to concrete or structural steel base material. CF 16 : Cable fixing clip CF 20 : Cable fixing clip CF 25 : Cable fixing clip CF 32 : Cable fixing clip...

... fillings: -expansion joints of asphalt concrete, -cement concrete, SMA mixes (Stone Mastic Asphalt), -in squares, streets, and car parks. •the compound is perfect for sealing joints between asphalt or concrete surfaces and steel elements (manholes), •works well as filling and sealing of damaged seams in asphalt pavements. Application temperature:150°C - 170°C Packaging:14 kg cardboard boxes...

...Solid, structural, and concrete yet soft, fluid, and abstract. Levico combines the organic sinuosity of the curve with the solid architectural presence of Betaly® in a play of contrasts, an oxymoron of form and matter that synthesizes into an iconic and minimal product. Starting from the quintessential architectural cell, the column, Levico allows light to determine its own shape, evoking the...

...ZIM 1536 machine is a high-end machine designed for the production of concrete blocks, concrete paverstones and concrete curbstones. ZIM 1536 comes out with high-end hardware, wide options of production and low labor cost. It can be used in automatic facilities such as FINGER CAR, BASKET SYSTEM, L TYPE SYSTEM. Our machine that can produce 15 blocks or 36 paverstones in one press, is designed...

...The profile resembles the H shape. They are wide-angled profiles. H-section structural profiles are primarily used in the construction of steel structures, but they are also utilized in reinforced concrete structures for support purposes. With their application in every area of construction in both low and high-rise buildings, they are also used in agricultural machinery, automotive, basic...

...General Working Principle of CPB - 30 Paving and Brick Machine operates based on hydraulic pressing and mechanical vibration, capable of producing all prefabricated concrete elements such as bricks and hollow blocks, as well as all types of paving stones. The CB - 30 Machine has a pressing capacity of 170 - 180 pallets per hour. It is manufactured with a fully automatic control system, featuring...

...For over thirty years, we are manufacturing concrete pipe machines, manhole machines, culvert machines, concrete barrier machines with moulds, pallets and all other equipment in our factory. We have full automatic and manuel models for different users in all sizes. We can also offer turnkey plants for the complete set of machinery for pipes, manholes and culverts with the concrete batching plants and gantry cranes. ...

...Application advantages: Quick erectability: Assembly of houses can be carried out year-round Low weight of structures allows to use lighter or existing foundations Fire safety: Possess high fire resistance and ability to preserve the structural integrity of the building in cases of fire. Economy: CLT structures are 5 times lighter than concrete, less stress on the foundation. Energy...

...Concrete-anchored stone screws according to DIN 529 provide a secure hold. Stone screws (DIN 529) are used for fastening machines and anchoring bridge elements and other structural components. Stone screws (DIN 529) are manufactured in various shapes (A, B, C, E, and F). By clicking on "Open drawing as PDF," you will receive a detailed drawing of the stone screws according to DIN 529. We are happy to manufacture stone screws according to DIN 529 in all desired qualities and according to your specifications, also in stainless materials.

... construction materials. They offer precision in molding, ensuring uniformity in size and shape, which is vital for structural integrity. With advancements in technology, modern brick and block making machines are designed for efficiency, allowing for faster production without compromising on quality. They can handle various raw materials, including concrete, clay, and fly ash, making them adaptable to different construction needs. In addition to standard bricks and blocks, these machines can produce interlocking blocks, paving tiles, and more, expanding their utility in the construction world.

...Structure Modeling Tools Reduce Modelling Time by Up to 80% with the Automated Structural Modeling Tools in EdgeWise 5.1. The speed and accuracy of EdgeWise automated feature extraction — now for structural steel and concrete. Modelling steel from scan data can be a pain. Current software is slow and often inaccurate, leading to missed deadlines and cost overruns. The new structural modeling...

... and saves costs. Thanks to its high strength properties, RAEX allows innovative and environmentally sound product development. RAEX is easy to weld, cut and has reasonably good formability. TYPICAL APPLICATIONS: Buckets and cutting edges of earth-moving machines, wearing parts of mining machines, wearing parts of concrete mixing plants and wood processing machines, platform structures, feeders and funnels. All steel is supplied with full mill test certificates to DIN EN 10204-3.1. Payment: L/C, T/T, Cheque, Transfer, Cash, VISA. ...

...Fire protection for joints tested according to European standard EN 13501-1 with fire resistance class EI 120. Litaflex-Vario is also suitable for joints that are subjected to very large movements. This allows it to withstand even significant structural movements while reliably maintaining its fire protection properties. Applicable in solid components made of aerated concrete, concrete, masonry.

...Galvanized and powder-coated steel elements. Device permanently founded in the ground, concrete foundations with minimum class: C-25/30. Structural posts protected with welded steel covers; bolts and screws protected with plastic end covers. Screw connections protected against corrosion by galvanizing Max. fall height:2,3 m Dimensions (L x W x H):7,42 x 4,45 x 2,4 m Impact surface:11,0 x 8,0 m Impact surface area:68,9 m2 Recommended surface:according to the table...