stainless steel pressed parts

...Funnel, pressed for measurement and control technology made of stainless steel...

...Housing parts made of steel, stainless steel, aluminium, brass. Made of solid material, profile material, cast blanks and pressed parts. With and without surface treatment.

... vessels made from high quality stainless steel material AISI 316L upper plates and covers of boiling vessels are pressed rounded edges and corners without dangerous prostrusions standard automatic refilling of water controlled by regulation circuit, on request manual refilling of water into the intershell of the duplicator a standard 2“ outlet valve controlled switching on and off of the burners.

... bottom, as well as at the base of the threaded rod. These seals prevent access to impurities in the connection between the threaded rod and the adjustable protective sleeve. The quality of the finish on the stainless steel parts prevents adhesion and facilitates cleaning.

...PEKI vertical valve series is made of high quality hot pressed parts and precision turned parts, assembled with modern injection moulded parts and sealing elements made in Germany. Short design with vertical lever arm and float, plastic and stainless steel floats from 3/8 to 1/2″. Material:Brass/Chem. nickel plated/VA Seal:NBR – EPDM – VITON Max. Temperature:70°C – 100°C – 100°C...

... type 60 3.1 / 02 Stainless steel hopper type 90 The symmetrical stainless steel hopper type 60 has an angle of 90" and is available for all Mueller drums. Deep-drawn lid rims, pressed cones, butt-welded seams and patented stainless steel valves with clamp closing and hand lever represent Müllers high quality. All parts inside and outside are polished and brushed to a 320 grit. Hopper for Müller drum Type 90 3.1 / 03 Stainless steel hopper type AS The stainless steel hopper type AS is asymmetric and is available for all Mueller drums. The...

...Wall cabinet for outdoor use with heating and ventilation made of stainless steel Wall cabinet for defibrillators in outdoor areas. Heating - Ventilation. Made of stainless steel with a knock button. The lid gently lowers after the knock button is pressed. Equipped with an alarm and lighting. Scope of delivery: Wall cabinet - Knock plates - Mounting materials - Power supply...

...Ming Xiao Mfg specializes in metal stamping services for over 20 years, having customized many types of stamped parts, punched parts, and deep-drawn parts for various industries, including spinning, welding, deep drawing, etc. Metal stamping parts available materials: Aluminum, copper/brass, stainless steel, carbon steel, mild steel, cold-rolled steel, Kovar steel, etc. CRS sheet (cold-rolled...

...The Columbus elevator bucket is according to DIN15232 and available in pressed (stainless) steel and plastic PE (white)/Nylon (green). Data Columbus Steel Data Columbus Plastic...

...PNEUMATIC SEALER SM 35/40A - WITH DATE PUNCHER Pneumatic sealer SM 35/40 A for closing bags in any material using an aluminum plate with a height of 5/7 mm. All parts in contact are made of AISI 304 stainless steel suitable for contact with food. The seal is obtained from a coil with high autonomy, cut to a length of 35/40 mm, wrapped around the neck of the bag and finally pressed to form a...

...In the plastics industry, support sleeves are used to reinforce plastic parts and prevent deformation. Depending on the application area, we manufacture high-quality support sleeves from steel, stainless steel, brass, or aluminum. A special edge processing technique ensures that the support sleeve does not create any burrs even when pressed in afterwards.

...Enclosure construction, shielding plates according to your drawings - assembly We manufacture enclosures, enclosure parts, shielding plates, and shielding enclosures according to your drawings, primarily from stainless steel, aluminum, anodized aluminum (E6EV1), tinplate (solderable), galvanized steel, and sheet steel. Nuts and bolts can be welded or pressed in. The assembly of multiple parts...

...The press-fit standoffs can serve as spacers or spacing elements. The hexagonal head is simply pressed into the sheet metal so that the material is displaced into the groove. The crimping on the head side is done in a completely flat manner. A wide selection of through or blind variants is available. Versions with wider heads and higher tensile strengths can be produced for high-stress applications. Material 1: Steel Material 2: Stainless Steel A2...

... such as forged blanks, pressed or stamped parts, and castings, we provide trough belt blast systems with rubber or steel link belts, as well as drum blast systems. Additionally, impact-sensitive parts can be blasted using the frame method. We manufacture using blasting media made of steel and stainless steel in shot and grit qualities with varying grain sizes and material hardness.

...Our production program includes the manufacturing and complete processing of turned and drilled parts. We work with materials such as automatic, case-hardened, and tempered steel, stainless steel, non-ferrous metals, as well as various plastics. From prototype parts to large series, including pressed and flat parts in large quantities - we produce everything. Precisely and on time!

... plastic fills the area around the barbs, resulting in maximum resistance to axial forces. SPIROL's Press-N-Lok™ pins are typically made from lightweight, lead-free aluminum and are also available in austenitic stainless steel upon request. BP100 Press-N-Lok™ pins are available in diameters ranging from 2mm to 4mm.

... sluices or, in individual cases, double-gate sluices are used for the pressureless discharge of the material. In order to increase the cyclone effect, or the degree of separation, counter-spirals with a pipe connection can be placed on top of the immersion tube. Further options are, for example, wearing devices, explosion pressure relief devices, control flaps, level monitoring devices and manufacturing in stainless steel or galvanised sheet steel.

... efficient technology offers numerous advantages: we can press parts with precise positioning. Additionally, steel bolts and stainless steel bolts from M2.5 to M6 can be used. With this method, we work significantly faster than with bolt welding, and the result is much more durable than welded bolts. Furthermore, the PEM press-in technology allows for the use of a wide variety of press-in bolts, press-in nuts, and press-in connectors.

...We manufacture sheet metal parts according to your specifications and support your product from the idea to production. Our stamped, drawn, pressed, and bent parts made from wire and strip materials are produced from various materials (steel, copper, brass, aluminum, stainless steel, nickel silver) on stamping machines and eccentric presses ranging from 3 to 120 tons. The tools for the...

... basket itself consists of two overlapping parts. This way, they form a sort of closed cage that retains dirt during the use of an ultrasonic cleaner. The two parts of the basket are held together by a kind of spring, which is pressed down. This way, the basket provides a well-isolated space. Since the mesh of the basket is very fine, it does not allow dirt to pass through, even the smallest particles. Reference: 03152 Total length of the basket: 150 mm Diameter of the basket: 35 mm...

... abrasives- rougher,cutting-off and grinding; tools on a flexible base- coated abrasives, in the process of loose abrasive grains grinding. The BFAO coated abrasives are used in the structural, carbon, alloy-treated, creep-resisting, stainless and instrumental steel processing, cast iron, solid bronze, ferrous castings, pressed parts, steel castings and forgings, and other materials of the artificial and natural origin. The BFAO coated abrasives used for blasting and in refractory and ceramic industries as a component for moldings, refractory mass, solutions and antipenetration washes.

...Stainless Steel, AISI 430+303, Guide Tube Brass Connection Voltages: AC 24, 110, 230 V 50-60 Hz DC 12, 24V Power Consumption: C1 12/8 VA 5.5 Watts Duty Cycle: 100% - VDE 0580 Ambient Temperature: +40°C Protection Class: IP 65 according to DIN 40050 Cable Connection: Device Connector DIN 43650...

...Warm-pressed parts of all types and shapes, raw or processed, weighing from 0.2 to 30 kg, dimensions 40 to 260 mm Ø, max. height 200 mm. Application areas: Agricultural machinery, general mechanical engineering, aerospace, power plant technology, automotive engineering, gearbox construction, valve manufacturing, engine construction. In steel: C-steels, alloyed steels, tool steels, etc...

... firmly pressed into the material by pressure, increasing the strength of the connection between the parts. The welding method enables precise connection between components while ensuring the strength and stability of the connection. Through the drawing and polishing operation, the rough and uneven parts of the surface are removed, and the dirt can be peeled off from the surface of the parts through the vibration effect of ultrasonic waves, ensuring the cleanliness and hygiene standards of the printer.

...We specialise in the design, manufacture, supply and delivery of Glass reinforced polymer (GRP / FRP) and composite products alongside niche carbon steel, stainless steel and aluminium metalwork activities. We are able to provide the delivery of full projects, or more specialised parts of a larger project. We can provide various GRP and metalwork products, including but not limited to: open...

...The "Robert Winkelsträter GmbH & Co. KG", based in Ennepetal (about 20 km south of Dortmund), was founded in 1952 as a manufacturer of hinges and fittings made of steel and stainless steel. Here, 20 employees manufacture, commission, and distribute products according to your specifications: • Laser-cut parts for sample construction, prototype development, and small series • Stamped and pressed...

... screws, wire bent parts, welded connections, spring clips, pressed, stamped, and turned parts, pressed, drawn, stamped, and wire parts in assemblies, components for precast concrete construction, welded parts, stud welding technology, round steel brackets DIN 3570 made of steel and stainless steel.

... sophisticated laser parts that meet the high demands of our customers. Our specialized products include electrical sheets for electric motors, stators and rotors, custom cuttings for the automotive and industrial sectors, as well as high-precision tuning plates that are used worldwide by our valued customers. Our commitment to quality, reliability, and customer orientation has made us a preferred partner for companies seeking outstanding laser technology solutions.

... pressure vessels and certification according to ISO 9001: 2015 - that is our quality. We design and manufacture pipe bends, containers, heat exchangers, heating plates, jackets, pipes, deep-drawn and pressed parts according to your specifications. With our X-ray facility and our own pickling shop, we offer the highest quality with the fastest possible delivery times. Our customers in the fields of chemicals, paper, food, petroleum, wastewater, construction, and power plant construction appreciate the quality products of Dannenmann GmbH and especially our quick response and delivery times.

...Johannes Steiner GmbH & Co. KG is a Swabian medium-sized company with a long, proverbial tradition and impressively demonstrates its capabilities day after day to this day. A large quantity of cold and hot pressed parts, coupling nuts, and cutting rings are produced from steel and stainless steel (1.4571 / 316Ti). With experienced, highly motivated employees, modern high-tech facilities, and a logistics center, the company STEINER has been providing the highest quality, absolute punctuality, flexibility, and comprehensive customer service for many decades.