Belgium, Perwez
...Rob. 3-Way Ball Valve PN 63 Stainless Steel 316 + Pneumatic Actuator Actreg Dimensions: 1/4’’ to 2’’ Connection: BSP threaded Fluid Temperatures: -30° C / + 180° C Ambient Temperatures: -20° C / + 80° C Compressed Air Motor: min 1 bar / max 8 bar Actuation: Double and single acting Certification: ATEX Zones 1, 2, 21, and 22 Material: Stainless Steel Pneumatic Actuation: 1 bar Maximum Supply Pressure: 8 bar Minimum Outdoor Temperature: +0° C Maximum Outdoor Temperature: +80° C...
... variant available. Areas of application: Switching speed not critical, suitable for long-term switching states, high flow rate, low susceptibility to particles. Lifespan: 50,000 switching cycles, easy replacement of the actuator, high-quality materials, and reliable sealing. Technical Data: FSA Motorized Ball Valve Set Stainless Steel 304 3/4" 9 - 28V Actuation: Open/Close Switching time: 8...
... tube parts,nonstandard thread bolt & nut,Extension Rod, etc. We custom Stainless Steel Components with high quality and low price,welcome contact us to discuss about your projects. Material:SS303,SS304,SS316,SS410 Finish:deburring, vibration polishing, Chemical clean Machining Technics:CNC turning, milling, boring, grinding,tapping Price term:FOB Ningbo, CIF Destination Origin:Ningbo China...
...This 2-piece female/female valve is a shut-off valve with full passage. The gas threading of this valve complies with ISO 7-1 standards (except NPT). Additional options: - Butterfly actuator (58137) instead of the handle, up to DN32 - Elevated handle Find more stainless steel ball valves on our site. Material: Stainless Steel 316L Available dimensions: from DN8 to DN80 Nominal pressure: 63 bar (1000 lbs) Temperature: from -20ºC to +150ºC Lockable handle: Ø padlock hole 7.5 mm...
Germany, Kürnach
...The balls of the HQW bearings are made of stainless steel (X65Cr13) as standard. However, for particularly demanding applications, ceramic balls made of silicon nitride or zirconium oxide are used. For the spindle ball bearings from HQW, only balls from accuracy classes Grade 3 and 5 are used. These two classes meet the highest tolerances regarding dimensions, roundness, and roughness.
Belgium, Oevel
...This standard tank from our inventory has been equipped in our workshop as follows: -Mixers according to customer specifications. -Control box with frequency converter and safety contacts. -Spray ball.
Germany, Steinau An Der Straße
...1) Most common geometry: Radial 2) Thickness [mm], width [mm], length [mm]: Thickness 5-20 mm, width 10-50 mm, diameter 10-300 mm 3) Materials: Chrome steel, stainless steel 4) Uses: Mechanical engineering, automotive industry, electric motors The exact specifications depend on the specific requirements and structural conditions.
...Material: Stainless steel 1.4301 (equivalent to AISI 304), 1.4305 (equivalent to AISI 303) or aluminum. Finish: Polished. Form C: Thread Form K: Hole...
...Stainless steel ball valves with threaded ends, welded ends, or flange connections. Available in 1-piece, 2-piece, or 3-piece designs with reduced or full bore. For example, a 2-piece flange ball valve according to DIN 3202-F4/EN 558-1 in stainless steel 1.4408 (AISI 316), PN 40 with full bore. Available in sizes DN15 to DN100. The ball valve can be opened or closed using a hand lever. The hand lever is rubber-coated and can be locked (in either the fully open or closed position). Suitable for pressure ranges up to 40 bar (temperature dependent).
Germany, Remscheid
...Stainless Steel Heavy-Duty Caster HS100.B28 with Stainless Steel Bearing and Red Polyurethane Tread on a Stainless Steel Fork. Load Capacity: 300 - 700 kg. Overall Height: between 128 and 242 mm. The Stainless Steel Heavy-Duty Caster HS100.B28 features a stainless steel fork and a double-row ball bearing in the fork head. Attachment is done via a mounting plate. The wheel body is made of plastic...
Germany, Mönchengladbach
...You are looking for ball valves, whether brass, stainless steel, or plastic. We offer a wide selection and are happy to assist you with your questions.
Germany, Renningen
...For special requirements, we manufacture curved rollers entirely from stainless steel. Special lubrications support successful use in the respective application.
Germany, Allendorf
...Stainless steel wheels, either pressed or solid welded. Available with various wheels made of polyamide, polyurethane, rubber, and elastic solid rubber. Stainless steel wheels with rustproof housings made of high-quality, rustproof chrome-nickel steel, either pressed or solid welded. Available with various wheels made of polyamide, polyurethane, rubber, and elastic solid rubber. The wheels are equipped with rustproof roller bearings or deep groove ball bearings or with plain bearing holes. Wheel diameter: 35 - 200 mm Load capacity: 50 - 2,000 kg...
Germany, Erzhausen
...Double column wall mounted stand mixer/floor stand mixer Rigid stand for wall-mounting or floor stand for mixers from 100 kg. The stand consists of 2 u-shaped columns with a ball-borne support slide with a cantilever beam for the mixer. The double-column stand allows the processing of tank volumes up to 4 m3, depending on the tank dimensions. Mixer powers up to 75.0 kW and support loads up to...
France, Fontaines Les Gres
...Slides stainless steel 1.4301. Ball cage stainless steel 1.4301. Balls stainless steel 1.4034. Version Slides bright. Ball cages bright. Balls bright. Note for ordering Sold in pairs. Note On telescopic slides with overextension, the travel is greater than the installed length. Latches in open position. When the release lever is actuated, the drawer can be taken out easily and separated from the...
Switzerland, Basel
...“WE ARE ON THE BALL FOR YOU” Schubarth + Co AG offers a comprehensive range of wire products. In addition to round, flat, and profiled wire, we can also provide directed rods. From simple steel wire to specialized medical wire, we offer a wide production program. VARIANTS: Drawn bright, drawn from flawless ground wire, drawn and final annealed, low-friction coated, etc. DIMENSION RANGE: From...
Germany, Burladingen
...We manufacture inlet tables and outlet tables for all brands in all designs and any custom dimensions. For example, for Winterhalter, Hobart, Meiko, Stierlen, and many more. Custom-built inlet table with box edge and roll edge at the transition from the worktop. KWC faucet. Basket shelf in any desired length with drainage optionally on the left or right. Optionally with or without ball valve.
Italy, Guarene
... switches. - Control valve for descent proportional to the weight exerted by the load. - Aluminum directional wheels with elastic rubber coating diameter 200 mm mounted on ball bearings. Load :Kg. 2500 Forks length (l):mm. 1150 Forks width (b5):mm. 525 Single fork width (e):mm. 150 Max. fork height (h3):mm. 115 Min. fork height (h13):Min. fork height (h13) Total lenght (l1):mm. 1550 Rudder height (h14):mm. 1160 Front wheels material:in nylon Rear rollers material:nylon/stainless steel...
Switzerland, Rotkreuz
...The three-part 2/2-way metal ball valve GEMÜ 798 is actuated electrically. It features a plastic drive housing. A manual emergency operation and an optical position indicator are integrated as standard. The seat seal is made of PTFE. • High flow rate • Ball with full passage Connection type: Flange Actuation type: Electric Body material: 1.4408, precision casting Max. operating pressure: 16 bar Max. media temperature: 150 °C Min. media temperature: -20 °C Nominal sizes: DN 10; DN 15; DN 20; DN 25; DN 32; DN 50; DN 65; DN 80; DN 100...
Germany, München
...Wrapped composite sliding bearing Stainless steel / PTFE coated | Maintenance-free dry sliding bearing | Corrosion resistance | Chemical resistance | DIN 1494 / ISO 3547 NOX-MET® is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! Excellent sliding and wear...
France, Raedersheim
... stainless steel for environments requiring corrosion resistance. The wipers are made of FDA-approved thermoplastic polyurethane. The polymer bearings are Iglidur J (dry operation). The bronze rings are oil-impregnated (non-food grade). The ball bushings can be with food-grade grease (please consult us). However, these units cannot be used in direct food areas (in contact with or above food) without precautions. Model: 342X to 346X Cylinder Ø: Ø20 to Ø50 Cylinder standard (others possible): ISO 6432 and 15552 Guidance column Ø: Ø12 to Ø25 Stroke: 0 to 400 mm...
...Picto video Video - Spring and Push Buttons Spring-loaded ball push button, hexagonal MATERIAL - Blackened steel or stainless steel (AFNOR Z 8 CNF 18-09, Werk 1.4305, AISI 303). - Polyamide thread lock, blue for standard spring versions and green for heavy-duty spring versions. - Heavy-duty spring versions have a double longitudinal marking.
Italy, Cogollo Del Cengio
... • PNEUMATICALLY, with a pneumatic actuator • ELECTRICALLY, with an electric actuator. All RIZZATO stainless steel ball valves are manufactured according to international standards and undergo all necessary tests to ensure the declared characteristics (operating pressures, usage temperatures, etc.) The VALVES supplied by Rizzato Inox are classified according to Directive 2014/68/EU PED as pressure accessories suitable for use in the presence of GROUP 2 FLUIDS, in gas and/or liquid state, according to regulation CE 1272/2008.

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play