single wire system

...Single-Wire-System as a safe guide for single cables If you want to group, stabilize, and guide different cables without using a channel, the Single Wire System (SWS) from PFLITSCH is the best alternative to clamps, ties, flexible tubes, or Velcro strips. Its advantages: - Flexible VA rod for stable and flexible guiding - Corrosion-resistant system - Open guide for cables, easy to clean...

...Double hooks are suitable for the presentation of goods in clear and blister packaging. The top bar and cross pin can carry scanning pockets, price labels or electronic price labelling as required. The snap lock is designed for perforated walls with euro holes. Goods carriers are our core competence and are available in many variants length, wire and material thickness, back wall system and surface can be selected almost freely.

... welding parameters, such as travel speed, wire feed rate, arc voltage, or weaving width. This constantly adapts the process to varying conditions, such as changes in the gap, alignment, root face, or temperature. The computer’s fast reaction time means the machine can work at high deposition rates and travel speeds at which weld pool conditions are too critical to be sustained by hand. Diameter capacity:75mm - 1065mm Pipe stand capacity:4535kg Daily productivity capacity:150 dia inch per day...

... can be achieved — Subsequent processes such as breaking and removing the drive pin are eliminated — No thread jump — Cycle time savings of 20-30% per process — No special installation tool is required for the screwing process — Fastening element, installation tool, and assembly equipment from a single source — Fully automatable with the HONSEL Coil Screw System 2G...

...Multirotor wire straightening machine using coils up to Ø 20mm for the production of straight bars. 4 wheel drive pulling unit driven by servomotors for high speed production; Maximum pulling speed 140 m/min; The straightening system uses rotors, each one dedicated to a single bar diameter which guarantees perfectly straight bars and wire diameter changes in just a few seconds; Servomotor...

...Unikabin is a cabin system designed to create a structure where the facade panels can be connected without rods, allowing for user assembly. Uni cabins can be used individually or in multiples. The standard panel height in cabins designed as storage is 2000 mm. It is suitable for creating freestanding storage spaces for residents of single-family homes, apartments, and properties. System height: 2030 mm Board height: 2000 mm Board width: 200/500/800/1000/1200/1500 mm Panel frame: 30*30*1.5 mm galvanized box profile Panel wire: ø 3 mm / 50*150 mm...

... the labels are normally wider than the distance between the threads, the label is preformed (Ushape) before application to reach the labelling position before it is placed around the wire and finally fixed as a flag label. The data is inspected by a vision system and compared with the original measurement information at the outfeed of the system (verification). The labels are printed in the system...

...1 Complete set consists of: + Energy chain + Individual parts AG5 and AG + Separator bars for every 2nd link, pre-assembled + Guide for AG + Upper track guidance + Connection elements for carriers + Wire rope + Rope tensioning unit + Fixed point module + Assembly instructions The autoglide 5 system for intralogistics and crane systems transmits energy, data, fluids, and air in a single system safely and with minimal maintenance, all at a cost-effective price. Travel distance: 10-60m Bending radii: 75-150mm...

... and earth fault currents up to 70 kA. CSN® Neutral Earthing Resistors provide optimal solutions for your applications high or low resistance values outdoor or indoor operation reliable, nearly maintenancefree technology compact design with high power density reliable performance at all system voltages Every single CSN® Neutral Earthing Resistor is manufactured according to individual customer requirements. ...

...High-precision manufactured silver-plated copper round wire as the inner conductor for coaxial cables. Dimension range from Ø 0.10 mm to Ø 1.8 mm, produced on a specially developed system. HF wire has a special diameter consistency, excellent concentricity, and an extremely clean surface.

...Specific marking systems for your industrial applications The perfect marking solution for your requirements. Whether plastic or metal, whether single labeling or series marking ‒ with our marking system, you will always find an optimal and cost-effective solution for every task. With MultiCard, MetalliCard, MultiMark, or CableLine, you are making the right choice.

...Trelleborg Cable Grommets and Cable Entries. Simple grommets to a system of entries. Professional solutions, available for quick delivery. Cable Grommets Trelleborg High-quality and easy-to-use cable entries single and double sealing IP 67 - standard PG 7 - PG 36 M12 - M75...

... commissioning, use, and maintenance, allowing you to save time on a daily basis. With parameter switching and simple system integration, it perfectly adapts to your measurement task. Input: Single-channel transmitter Protection rating: IP66, IP67, or NEMA 4X...

...Fronius is a complete provider, system manufacturer, and single-source supplier of welding systems for all industries. Our technologies are suitable for all types and manufacturers of robots.

...Our machine transforms grass wire produced by our Long, Rover, or Pro type grass fence preparation machines into grass fences through a weaving process. The semi-automatic system 'SPINNER' can produce grass wires with varying mesh spacings and heights. In addition to being easy to use by a single operator, it allows you to produce grass fences at a high capacity. Our grass fence weaving...

...The Wire-O Binder R522 Perfect for binding calendars and catalogs up to a diameter of 3/4. Its compact dimensions, ease of tool exchange, and maintenance make it a truly "for everyone" binding solution. Equipped with the new touchscreen technology and a push-button system for releasing the bound product. The operator must input essential data into the computer, including diameter, pitch, and the...

... After the pre-dosing step, a second phase starts to reach the final desired weight by adding a controlled quantity of gold or silver wire or powder (depending on customer specification) and the discharge the correct quantity of material into a container. To maintain accuracy and productivity, the machine is capable of self-learning, based on the continuous use. In particular the machine can statistically anticipate the average drop time of a single grain, to avoid overshoot.

...Alpha 488 S produces fully automatically Twisted-Pairs out of two single bulk wires completely cut-to-length and terminated, with all quality controls included. The modular composition of the system provides superb flexibility. Four processing stations at the wire beginning and two at the wire end offer extensive processing possibilities. The machine layout accommodates up to six processing...

...The washing racks, so-called base frames, enable efficient cleaning with maximum flow. Dimensions can be individually defined by the customer. Several bulk goods baskets as well as several workpiece carriers can be cleaned at a single wash cycle at the same time. The washing racks each have 2 perforated strips on the front sides and can be closed with a locking or clamping lid depending on...

...Djibouti , Algeria, Morocco. Tunisia, Mauritania, Nigeria, Senegal. How to buy To place an order, add your products to the basket and send your request. We will contact you within the next working hour and you will receive confirmation of your order and your invoice. For any additional information, please contact us via the site's messaging system or by email at contact@profelec.fr or by telephone from...

... simple system integration, it perfectly adapts to your measurement task. Measurement Principle: Redox Sensor Application: The Liquiline M CM42 is a modular 2-wire transmitter for all areas of process engineering. Feature: The extremely robust synthetic housing and the hygienic stainless steel version are designed for... Measurement Principle: Analog or digital Memosens sensors Design: 2-wire...

...The FSoE protocol is implemented according to the Safety over EtherCAT specification ETG.5100 version 1.2.0. Inkremental or absolute:Absolute Interface:EtherCAT FSoE Single- or Multiturn:Multiturn, Singleturn Design:58mm, 64mm, 65mm, 66mm, 90mm, 105mm, 125mm Special feature:SIL2/PLd Housing material:Aluminium, Stainless steel 1.4305, Stainless steel 1.4404 Code type:Binary Measuring range:10 measuring lengths in metres for the draw wire version. Possible values: 6 and 10,4096 revolutions Profile:FSoE, SIL2-certified Electrical connection:Kx: Cable, x: Length in m, M12 connector...

... system is controlled via a single master control panel including a large touchscreen PLC. With our complete equipment you can produce a wide range of hose diameters extending from small to larger, according to your need.

...Based on a single station concept with compact design and user-friendly handling, the WCEvario3D is ideal for wire laying on flat and uneven surfaces as well as for producing and processing prototypes and small batches. With a wide range of additional options that may be integrated, the system can be profoundly expanded. For safe and accurate handling of complex components, the workpiece is...

...“ facilitates different processing in a single working pass, the circumferential rotary technology offers exact circular cutting for cables with very thin or rigid outer insulation cover and for co-axial cables. Every model is equipped as standard with a full set of interfaces for peripheral equipment and IT integration. The machines can easily be converted into complete production lines, thus further increasing the process automation.

...PVC-INSULATED, SINGLE CORE, WITH RODENT PROTECTION The cable is designed for connection of Station signal-safety equipments on electrified main railways single-phase system of 25 kV, 50 Hz and D.C. system of 3 kV. Cables can be burried directly into ground or can be laid in cable ducts, tubes and indoor. Conctructions with different Number of wires are also allowed in acc. to agreement with...

...The beam welding automation system is a welding automation system that enables the welding of workpieces such as H, I, and T shapes using either gas-shielded or flux-cored welding systems, whether single or multiple. The beam welding automation system allows for linear welding by moving along a rail. Deviations on the material are monitored by a mechanical tracking system, ensuring consistent...

...% Sample positioning range:12 mm Sample positioning resolution:1.5 um Sample dimension:up to 1,5” X 1,5” X 1/2”, 35x35x12 mm Sample weight:Z – Stepper Motor Approach system step size:230 nm Approach system speed rate:10 mm per min Algorithm Gentle approach:Available (probe guaranteed to stop before it touches the sample) AFM head for Si cantilever:Available. All commercial cantilevers can be used...

.../profiling cassettes, a spooler. The smooth or ribbed wire produced by the cold rolling line can be collected with horizontal spoolers on fixed reels of 2 or 3 tons, or with single or double vertical spoolers on fixed or collapsible reels of 2 or 3 tons. This cold rolling line can be completed with some accessories: butt-welder, strain-relieving unit with rolls, reel tilting unit, strapping system for the production of strapped wire coils.

...Synergistic MIG Inverter, Portable Handy, portable, versatile: The RallyMIG 161i is a compact multi-process welding system - primarily for MIG welding, but also suitable for manual electrode welding (MMA). The modern single-phase 230 V inverter, designed for 5 kg wire rolls, is a nimble welding machine for the workshop - and also for mobile use in maintenance and repair tasks on the go. Simply select the MIG process on the digital display and enter the wire-gas combination: You are ready to weld with your Rally 161i: Turn it on - press - weld.