rpm measurement

...Eddy Current Series AX-turbo, Speed Measurement on Turbine Blade Speed Measurement: > 500,000 RPM Protection Class: IP68 Operating Temperature: up to +185 °C Output: TTL / analog...

... (Motor Under Test) at a low speed from 1 to 10 rpm (respectively 8 rpm for CTS 103 and CTS 104), while acquiring its cogging torque related to angle position. The torque measurement covers a range up to 1 N∙m (depending on the selected torque sensor) with an accuracy of ± 0.1 mN∙m (for TS 100 – 50 mN∙m and TS 101 – 100 mN∙m). The executable software controls the system and displays acquired data. It...

...High-precision absolute angle measurement system with a flat design Magnetic operating principle makes it extremely insensitive Perfectly suited for applications in CNC machine tools such as rotary tables Serial interfaces for Fanuc, Mitsubishi, and Yaskawa CNC Accuracy: +/- 2.5s Resolution: 25 bit Max. rotational speed (electrical): 2000 RPM Interfaces: Fanuc, Mitsubishi, Yaskawa...

...General purpose, high rotating speed, noncontact rotary torque sensors with square or round shaft. o Bidirectional o Maintenance free o Round or square shafts (see drawing) o Measurement range up to 100 N·m o Max. rotating speed Square shaft 5 000 rpm Round shaft 10 000 rpm o Integrated signal conditioning o Analogue output signal (see Wiring table) Reference:62300 Cable length:5 m...

...The Aeros® color measurement device from HunterLab features integrated quality control software and averages over a large surface area to measure the color of all inhomogeneous samples with uneven structures – contactless, precise, and resource-efficient! Measurement Principle: Contactless dual-beam spectrophotometer Measurement Area: 177 cm2 Measurement Frequency: Continuous 7 measurements per second Measurement Method: Measurement opening facing down; Rotating sample table (12 RPM)...

...11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm current and voltage output measurement accuracy ≤ 0.25% contactless signal transmission proven strain gauge technology built-in signal amplifier simple power supply universally applicable RPM measurement optional The new features: more versatile mounting options torsion shaft stainless mistake-proof installation oriented mounting large...

... Connection: Round shaft ends, keyway Electrical Connection: 12-pin connector, USB Integrated Speed Measurement: Optional (TTL output signal with 400 or 1024 increments) Integrated Angle Measurement: Optional - TTL output signal with 400 or 1024 increments Integrated Angle Measurement: Optional - Angle resolution 0.225° or 0.09° with four flank evaluation Increments on Encoder Disc: No encoder disc, 240, 400, 1024, 2000 Protection Class: IP40 Operating Temperature Range: 0 ... +60 °C Max. Speed: Depending on measurement range 7,000 - 25,000 rpm Signal Transmission: Contactless...

... goods • Versatile usage options through various special equipment: • Pallet weight measurement (scale) • Non-driven rollers on the turntable Turntable diameter: 1,650 mm (optional: 1,500 mm, 1,800 mm, 2,200 mm, 2,400 mm, 2,600 mm) Maximum pallet dimensions: up to 1,000 x 1,200 mm (optional: up to 1,700 x 1,700 mm) Max. turntable speed: 3 – 12 rpm Load capacity: 2,000 kg Electrical connection: 230 V...

...) Sampling rate:1024 pixel per scan line (2048 for CS212) Ambient operating temperature:-40...45 °C (no direct sunlight) Ambient temperature - position indicator:-25 to 230 ºC Zone alarms:48 software, 3 hardware (PC independant) Kiln rotation rate:Up to 10 rpm LRM accessory:Supports up to 6 tires Fan Control accessory:Supports up to 16 fans per module (48 total) Communication:Ethernet TCP/IP Analog output:3 x 4 – 20 mA Alarm output:Relay, contacts: 30 V, 1 A Power supply:24 VDC ± 25 %, 1 A...

...In the fluid dynamics laboratory of our competence center in Wasserburg, we design new fan wheels and turbines or optimize existing systems in terms of performance, energy efficiency, and noise emissions. We also develop complete systems of wheels with drives. Our test bench includes suction operation, pressure operation, or even pressureless measurement. Speeds of up to 40,000 RPM are possible...

... consumption, very fast startup time and over 50% reduced weight and size. A new, very powerful laser technology and further developed algorithms ensures highly accurate measurement results on rails, roads, street signs and other traffic control systems such as traffic lights. Technical highlights: 267 profiles/sec. P9020: 1.094 million points/sec. P9020-2: 2.188 million points/sec. 0.2 mm accuracy 182 m range 360° field of view The Z+F PROFILER® 9020 and 9020-2 can be flexibly integrated into different MMS...

...CNC milling head for cavity, high speed up to 60,000 rpm, with dust extraction for milling. Depth control for milling Production up to 3,000 boards/hour Feeding of boards one by one from two removable magazines Transport of boards from one workstation to another is done by a conveyor The board thickness measurement station ensures that only one board is engaged. Hot Melt tape unwinder, cutting...

... forward for anyone looking to measure torque and power with high accuracy and repeatability using up to 24 bit resolution. The M425 torque sensors give the customer control over their tests with torque sample rates selectable at any time from 1sps up to 4000sps as standard. With rpm measurement based on up to 30 pulses per revolution, the M425 is now the complete torque transducer for measuring torque and power on any rotating shaft. When paired with the Datum Universal Interface (DUI), the M425 Torque Sensor gives customers a ... ** Click for more **...

...Mechanically coupled tachogenerator with AC output signal. Cost-effective tachogenerator with AC output. Suitable for harsh operating conditions. Direct and indirect drive possible. Protection class housing: IP65, protection class drive side: IP54 Variable electrical connections. Variable mechanical connections for speed measurement. Speed range: 150 - 3000 rpm Output channels: 1 channel Output signal: AC; frequency 0.1 x speed Operating temperature: -20 … +80°C Protection class: housing: IP65, drive side: IP54 Certifications: GL, LR...

... interfacial tensions based on the contour of rotating drops according to the models of Vonnegut, Cayias-Schechter-Wade or Young-Laplace - highly dynamic measuring drive with 0 to 20000 rpm - oscillation measurements with oscillation periods of 0.5 s to ∞ and a maximum acceleration of 500 revolutions/square second - motorised tilting table - fast lens with 6.5x zoom and integrated, continuous fine focus - temperature-controlled measuring chambers able to set temperatures between -30 °C and 180 °C - special capillary for water-based samples at temperatures up to 130 °C ...

... use, flexibility, and easy cleaning Product discharge by electric tilting of the tank Variable mixing arm speed from 6 to 20 rpm Removable lid Control panel with color touch screen Precise measurement and quick response of the heating system Second temperature probe in the tank (standard) 4 stainless steel swivel casters with brakes Ø 100 mm Delivered with CE conformity certificate...

...Format saw with a 400 mm blade Standard equipment and features Anodized Z4 type carriage measuring 420x3200 mm, cutting capacity 3500 mm Welded steel saw unit type FZ4 Max blade 400mm / 350mm with mounted scoring blade Scoring module 120X20mm (blade not included) Cutting height (90°) 125 mm / (45°) 90 mm Saw blade rotation speeds: 4000 rpm Blade tilt indicator on angle measurement scale. Ripping...

...The angle encoders without integral bearing (modular angle encoders) are intended for integration in machine elements or apparatuses. They are suited for the following requirements: — Large hollow shaft diameter (up to 10 m with a scale tape) — High shaft speeds up to 20000 rpm — No additional starting torque from shaft seals Angle encoders with graduation on glass disk Field of...

...REDPOINT: non-contact electronic tachometer From 1 to 99,999 RPM, range 60 cm, Delivered complete in a case with battery.

...Vibration monitoring and sensors including acceleration sensors HMA, speed sensors, vibration velocity sensors PMG, acceleration sensors SA, and many more. Vibration and speed sensors Choosing the right measuring transducer or sensor is crucial for the quality of a measurement. Therefore, Hofmann offers a wide range of sensors suitable for various applications: - Acceleration, vibration...

... is complemented by the optional "Quality Check", a wall thickness error check. The "Quality Check" detects anomalies on the surface, in the material and on the inner surface of the pipe. Further advantages/features: — 100 % wall thickness measurement for pipe dimensions up to 630 mm in diameter — Electronic rotation up to 16,000 rpm — Evaluation of vertical and angular signals reflected from...

...). The mounting of the devices on the spindle is done via a hollow shaft and does not require an additional coupling. The mounting of the gearbox can be oriented as desired to create the most suitable geometry for the available space. No additional transmissions or angular connectors are needed. Nominal torque / Nominal speed: 2 .. 8 Nm / 200 .. 50 rpm Stroke: 977 .. 4026 revolutions Protection...

... Obtains data from wireless measurement reader (optional with measuring rod) Pieces are cut in the order according to the measurement data that is sent from the digital measuring rod OPTIONAL ACCESSORIED Digital measuring rod (2.2 m) Digital measuring rod (3.0 m) Sizes could be customize according to requirements. TECHNICAL SPECIFICATIONS 250 W 230V AC 50~60 Hz 3000 RPM 58x315x56 cm 193 kg 130 kg...

... / IP54 Cutting diameter: 170 mm Ø Blade diameter: 500 mm Ø RPM: 2,800 RPM Hub: 30 mm Ø Dimensions: 700 mm L x 1020 mm H x 780 mm D (min) / 1000 mm D (max) Working table height: approx. 60 cm Table extension: approx. 350 mm Wood cutting measurement extension: approx. 650 mm Net weight: 59 kg Package dimensions: 900 mm L x 600 mm D x 450 mm H / 62 kg...

...Universal measuring device with special functions for testing and repair work on vehicles. 11 multimeter measuring functions + measurement of RPM (tachometer), closing angle, pulse width, IR thermometer.

...Power test bench for motorcycles. Power measurement at constant speed or constant power Load via electric eddy current brake "Telma" Power bench with acceleration measurements from pre-selected speeds graphic and digital display of power, torque, consumption, and losses in the drive supplied with remote control, battery, and charger ability to save and recall all measurements different RPM recordings available...

...High-speed (HSC) CNC milling machines for non-ferrous metals Up to 60,000 RPM 36-80 tool magazine Compact footprint Retractable 3D probing system Robust machine body made of UHPC Direct path measurement - glass scales Max. machining travel X-axis 230 mm Max. machining travel Y-axis 150 mm Max. machining travel Z-axis 220 mm Max. table load 8 kg...

... table diameter:mm 1,600 Table speed:rpm 120 Table load:kg 4,000 Carriages:1 Grinding ram stroke:mm 800 / 1,000 Feed force:kN 10 X- and Y-axis speed max.:mm/min 10,000 Spindle-holder tilt:degree - 5° + 275° Tilt lead:degree 1° (Hirth) Power (conv. GW) (S1):kW 7 à 45 Speed (conv. GW):rpm 4,000 à 12,000 Power (CBN wheels) (S1):kW 15 / 25 Speed (CBN wheels):rpm 8,000 / 18,000 GW diameter (conv. or...

... 1450 RPM (50 Hz), Measurement conditions: EN12900 Cooling capacity (W) at To - 10 °C - 15 °C - 20 °C - 25 °C - 30 °C - 5 °C 0 °C 5 °C 7 °C 10 °C 12 °C 4390 3400 2570 1860 1280 5550 6910 8490 9370 10320 11340...

...Balancing in full range of rotational speed extends lifespan of turbocharger and eliminates undesirable effect of whistling. Choose the best model that fits your needs Maximum turbine wheel diameter:89 mm Maximum rotational speed:300.000 rpm/min Maximum flow measurement:307 m3/h Measuring accuracy:+/- 1 kg/h...