regulator valve

...Low pressure regulator with fixed setting, with bleed valve OC73.222: 30 mbar OC73.224: 50 mbar...

...Compressor safety valve, rated at 200 PSI.

...Compact filter valve controls, with and without built-in differential pressure regulators, for the electrical control of solenoid valves in industrial dust extraction technology. Suitable for both new systems and for increasing the efficiency of existing fabric filter systems.

The GEMÜ Group is a leading manufacturer of valve, measurement, and control systems for liquids, vapors, and gases. Globally oriented family business in its second generation. The globally oriented, independent family business was founded in 1964 by Fritz Müller and, with its innovative products and customized solutions, is one of the top addresses worldwide for the control of process media.

...Designed tc manually inflate latex Balloons and foil/ mylar balloons, this economic oalloon regulator features an upright tilt valve for easy inflation of all size Balloons, ncludes a pressure gauge to measure the amount of gas in tank.Regulator connects to cylinder with hand-tight connection using the large and easy to rotate slack handwheel.Works with helium and nitrogen cylinders.Important...

...The self-regulating pressure controller type 8011 with a closed spring cover, available as a pressure reducer (back pressure regulator) or overflow valve (forward pressure regulator), is used in a wide range of process control tasks. Media such as steam, liquids, gases, etc. can be excellently controlled without auxiliary energy. Materials: Completely stainless steel; Housing 1.4581 / 1.4408...

...Valve + filter regulator + lubricator maintenance unit of the Comfort series Sizes: 1/4" to 1" Adjustment range: 0-2 bar, 0-4 bar, 0-8 bar standard, 0-12 bar Filter fineness: 5 – 20 – 50 µm Flow rate at 6 bar with ∆p 1 bar: 800 to 3500 Nl / min Pressure range up to 15 bar...

... simple and intuitive operation. The multi-colored LEDs provide a visual warning when the water parameters deviate from the desired range. . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Measuring water filter . Flow monitor . Flow regulator DFR 45 with measuring water extraction point and built-in temperature sensor . Inlet and outlet valve . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multi-colored LEDs . Cover hood The measuring cells are partially packaged separately and are not pre-assembled.

...Upon request, we can equip your squeeze valve with optional accessories. For example: solenoid valve, pressure regulator, filter regulator, pressure switch, quick vent, etc.

... (max. 60°C) • Lightweight CO2 Standard version 3 - 25 l/min Connection only suitable for TransSteel 3500/5000 with preheating socket! Cylinder valve: G ¾" Pressure regulator: with flow meter (forming gas) 30l...

... drain valve. Recessed lighting (TL type) waterproof (IP65), high temperature. Built-in speed regulator on the front, with lighting switch. INFO: Low energy consumption centrifugal fan motor (Energy saving) Maximum discharge of 6 meters of ducting and 1 bend at 90° = 160 Pa. Reference: CSL2509-VTB Brand: Diamond Europe Net weight (kg): 65 Dimensions in MM (LxPxH): 2500x900xh460 Volume (M³): 1.69 Power (kW): 0.48 Power supply (Volt): 230/1N 50Hz...

...The sanitary pressure-regulating pilot valves of the P147 model series are designed for use with clean air, nitrogen, carbon dioxide, oxygen, argon, and other gases or liquids compatible with the construction materials and design of the valve. This valve is specifically designed for high-purity gas systems found in pharmaceutical, cosmetic, fine chemical, and food and beverage processes. Sizes: 2-1/2" to 3" - DN65 to DN80 Maximum operating pressure: 16 bar Maximum operating temperature: 150°C Nominal pressure: 0.2 to 8 bar...

...Pressol pneumatic Oil pump installation set for 200/220L drum model 19235600 To pump Engine, transmission, hydraulic oil. Ideal for direct connection to pipeline systems up to 70 m Can be easily combined with several hose reels Suitable for oil up to SAE 90 Installation set consisting of: Oil pump 3:1 model 19235 Compressed air hose 2 m DN10 with quick couplings Euro profile Oil drain hose 2 m DN13 with 1/2G bi.bu Ball valve 1/2 Filter Pressure Regulator with Oil Mister 20218950...

...This standard tank from our stock has been equipped in our workshop with the following elements: - Agitator according to customer specifications. - The agitator was equipped with a frequency regulator. - Flush bottom valve. - Leg elevation.

...The centrifugal force regulator provides a constant rotational speed here, even with changes in load, and allows for reduced air consumption. The elastic spindle housing improves surface quality and reduces cutter wear. An exit brake also offers an increased level of safety. Drives: pneumatic Other features: right, rear exhaust...

... mechanical throttle opening. As a result of this relaxation (pressure reduction) at the outlet, a liquid-vapor mixture is present behind the high-pressure float regulator, which is directed to the separator. Generally, a high-pressure collection vessel can be omitted. By continuously relaxing the refrigerant, pressure fluctuations are avoided, and the amount of flash gas is reduced. This decreases the electrical power consumption of the compressor. This saves up to 13% energy.

...Directly controlled, compact pressure reducing valve with internal measurement for steam and compressed air. The setting of the reduced pressure setpoint is done via a spring, which can be adjusted over a wide setpoint range and, if necessary, can be easily replaced with a spring from other setpoint ranges. Self-media controlled, no external energy required. Suitable for gases / steam / water / nitrogen, made of steel / stainless steel / lined with PFA.

...Pneumatic actuator unit for operating the gas, brake, clutch pedals, and gear lever in vehicles. External setpoint specifications for the actuator position via analog setpoint or brake pedal force to pressure regulator in externally mounted valve box. Quick, easy, and stable installation on the driver's seat. EMC-resistant mechanics in a safety design with mechanical, spring-loaded return to...

... size and geometry of the tub); Electric pump, 700W - Italian production Sorb 3F with anti-cavitation safety valve 12 air jets with lateral diffusion, placed on the bottom of the tub; Blower (blower) 700W - Italian production Automatic column with siphon; Metal support with adjustable legs and clamps for fixing to the wall, anti-corrosive protection...

...Dosing system DB 10: lubrication made easy The dosing system DB 10 uses a pressure vessel with a capacity of 10 litres. This is equipped with a filler ball valve and plastic funnel, a pressure regulator with bleed screw and a safety pressure relief valve. A float switch is fitted to regulate the fill level. There are two dosing valves on the underside. This dosing system is available in the following versions: DB 10 H – with poppet valve DB 40 – with 40 litre reservoir DB 40 H – with 40 litre reservoir and poppet valve...

...Checking and Setting of: Function, Closing Pressure, Flow Pressure, Bypass Quantity, - Stationary Testing Facility for Checking and Setting: Overall Function of the Gas Pressure Regulator (GDR), Test Pressure and Pre-pressure, Closing Pressure, Flow Pressure, Bypass Quantity, Function of Safety Shut-off Valve (SAV), SAV Zero Closure Test...

...Our commitment to precision and the rigor of our quality ensures the necessary sealing guarantees for hydraulic or pneumatic equipment. Sealing rings, spacers, seats, check valves, connectors, clamps, nuts, screws, adjustment screws, needle valves, bleed screws, bushings, valves, tubes, valve bodies, regulator bodies, crimp nuts, nipples, crimp fittings, pushers, bodies, valves, pistons, caps...

... infusion solution is combined with an air valve with a filter); 4.Drip chamber with filter to prevent the entry of unwanted particles, provides visually controlled filling; 5.Roller speed regulator; 6. an elastic adapter between the tube and the injection needle for additional drug administration; 7.Tube-to-needle connection type: Luer Lock; 8.Sterile, apirogenic, non-toxic; 9.For single use; 10.Packaging options: 25/500 11.Shelf life 3 years from the date of manufacture indicated on the package.

... flow at the nominal pressure Measurement element fully integrated into one module 128 programs Mechanical or electronic regulator from vacuum to 10 bar Weight :7 Kg Dimensions:(WxHxD) 250x150x360 mm Operating:+ 5°C at + 45°C Storage:0°C at + 60°C...

... regulator, accurate to 0.01 psi (0.069 kPa) External collection package. Horizontal dispersion system High temperature package Chromasoft software High voltage kit (over 480 VAC) High capacity oil & water extractor Custom sizes (extra height or any LxW) and configurations (pass-through electrical/mechanical ports)...

... differential pressure/flow regulator to provide constant flow rates in case of varying inlet or outlet pressures. The device has approvals for use in hazardous areas. Fluid::for liquids Technology::variable-area Other characteristics::glass tube; in metering tube Process temperatures::-5°C to +100°C Operating pressure::up to 10 bar Upper limit of measurement for liquids::0.4 to 160 l/h (water: 20°C) Upper limit of measurement for gases::5 to 5,000 l/h (air: 20°C, 1.013 bar)...

For decades, Arthur Grillo GmbH has been one of the leading manufacturers of measurement and control technology for building automation. We produce high-quality sensors and controllers for the industry. The focus of our range includes: - Differential pressure measurement (low pressure) - Industrial temperature and humidity measurement - Flow measurement Our company has been in existence for over...

...Medium Pressure Regulator Type MRCib DN15-25 / ANSI 1/2"- 1"...

...Diaphragm Pressure Reducing Valve DN15-DN25 ** / Body : Brass ( CW617N-CuZn40Pb2) / Connection : Threaded (FF) / Type : With union, with gauge (manomater) / Max. Working Temp. : 120 ºC / Max. Working Pressure : 16 Bar *** Application Areas : Hot and Cold Water Systems Nominal Diameter DN:DN15-DN25 Connection Type :Thread Connection:With union, with gauge (manometer)...

... exists in the system, it is closer by itself automatically. When valve upstream pressure value decreases below adjusted downstream pressure value, it is opened fully by itself. Valve may be user in vertical and horizontal positions in the system.