pressure reducer

...Pressure reducer, made of zama, variable setting...

... according to customer specifications ensures a perfect fit and optimal performance, enhancing the efficiency and safety of the systems in which they are used. Brass pressure reducing bodies include mechanical, automatic, diaphragm, constant flow, and gas models. This variety of options allows for the selection of the most suitable reducing body for each specific application, ensuring precise and...

...Valvoline pressure reducer...

...Show Product Variants Oil Consumption Reducer The oil consumption reducer stops excessive oil consumption. It reduces exhaust smoke and engine noise. It increases oil pressure and compression. Features: • Selected active ingredient combination improves the stability of the lubricant film at high temperatures • Counteracts oil dilution from fuel in short-distance traffic and reduces oil...

... constant working pressure of 2.5 bar to protect the gas flow sensor of the orbital equipment. Versions: — SPECIAL ARGON PRESSURE REGULATOR with dual flow meter, brass — SPECIAL PRESSURE REGULATOR with dual flow meter for H2 gases, brass — SPECIAL ARGON PRESSURE REGULATOR with triple flow meter, brass Other versions available upon request.

...The autonomous pressure regulator type 8011 is a reinforced version with a closed cap. It is available as a pressure reducer (downstream pressure regulator) or as a relief valve (upstream pressure regulator) and is used in a wide range of process engineering control applications. Media such as steam, liquids, gases, etc. can be perfectly controlled without auxiliary energy. Material: Fully...

Metal processing & further processing from Medebach. Our competencies: stamping technology ✓ tool making ✓ laser cutting ✓ welding technology ✓ pipe bending ✓...

...There are 4 types, 168-219-273-323. The reducer is an element of the parallel gear trains of the gear wheel assemblies together with the gear system gearboxes that change the rotational ratio of a rotational movement with the help of gears.

... biological substances, freezing of tissue and blood samples, research in chemistry, physics, and materials science, etc. Dry ice is easy to handle and has no taste or odor. The SnowPack® dry ice equipment can be connected to any European CO2 steel bottle with a lift tube without a pressure reducer (W 21.80 x 1/14" according to DIN 477-1 No. 6), which is found in many companies and laboratories. Otherwise, a bottle can be rented for a small fee. Gas release time approx.: 1 min...

...This machined 316L stainless steel reducer allows for the reduction of a thread and adapts the connection in a fluid network. It is available for threads ranging from 1/8" to 3". Available diameters: from DN8-6 to DN80-65 Thread type: Gas or NPT Nominal pressure of the reducer at 20°C: 20 bar Nominal pressure of the reducer at 100°C: 16 bar Standard: ISO 7-1 (except NPT)...

...IT PROVIDES THE MIXTURE OF DIFFERENT PRODUCTS IN A HOMOGENEOUS WAY. THE BODY IS MADE UP OF 4-5 mm SHEET AND HAS A SINGLE-SHAFT SUDDEN DISCHARGE FROM A THICK-FLAXED PIPE. FILLING IS DONE FROM THE TOP AND THE PRESSURE BALANCE DURING FILLING IS MAINTAINED BY AN AIR PIPE. BOTH THE LOWER AND THE UPPER COVERS ARE PINEMATIC CONTROLLED AND THE OPERATION OF THE ROTOR IS PROVIDED BY A REDUCER. THE OUTPUT OF THE REDUCER AND THE OUTPUT OF THE MIXER ARE DIRECTLY COUPLED. A DOUBLE SPIRAL LEAF IS ALIGNED ON THE MAIN SHAFT IN ORDER TO MAKE THE RAW MATERIAL TO BE MIXED IN A HOMOGENEOUS FORM DURING THE MIXING.

...Ff Pressure Reducer Industry With Inox Seat...

... filler-loaded material - no backflow within the withdrawal pump - electrical control of the pump with pressure control - direct dosing from the container possible - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: Removal of materials directly from the delivery container, e.g. silicones, adhesives, resins, fats, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes)...

...The hoses can be offered as reinforced versions or not. The non-reinforced hoses, which have a lower pressure resistance, are generally used by industrial OEM manufacturers, such as washing machine manufacturers. All sizes are available in the following configurations: straight, straight with reducer, 90° elbow, 45° elbow, 135° elbow, and 180°. We are happy to assist you in developing custom shapes according to your requirements/design. Below you will find the nominal pressures for the Shore Master. Used for industrial OEM manufacturers, such as washing machine manufacturers.

WOMA GmbH | Kärcher Group WATER POWER AS A TOOL. WOMA is one of the leading providers of high-pressure plunger pumps, ultra-high-pressure devices, high-pressure systems, and water tools. Innovation and quality have distinguished us for over 50 years. Through consistent research and development, we now master systems with water pressures of up to 4,000 bar. For customers around the world, we deve...

...PRESSURE REDUCER WITH MANOMETER - BRASS BODY AND INTEGRATED STAINLESS STEEL FILTER - EPDM MEMBRANE AND SEALS - MALE BSP UNION CONNECTION...

...interstices, brick, stone or mixed arches, present in taverns, public premises and of historic monuments interest. The application surfaces should be clean, free of incrustations, dust etc. A preliminary wash with distilled water or steam it's recommended. The support should be dry when applying. Apply the product as it is, with low pressure sprayer or brush with long bristles. Keep the substrate wet...

...The PPM tie stations allow for better utilization of nitrogen cylinders and enable the filling of hydro storage up to a pressure of 300 bar. The stations are attached to standard nitrogen cylinders and are available in various designs. The PPM NCU/N/35/300 is a standalone unit equipped with a powerful gas compressor, pressure switch, and pressure reducer. It is built on a portable housing and is...

... screw spindle and servo motor incl. pneumatic horizontal and vertical clamps Float mounting feeder to balance bend profiles Waste piece from 85mm Reducer of clamping pressure horizontal and vertical Cycle spray mist device with level indicator and automatic stop Cut-off length from 3mm Automatic cut-out when bar is finished Technical Data: Motor up to 18,5kW, S 6 40%, 400 V, 50 Hz, 2850 R.P.M. r.p.m. infinitely adjustable Saw blade speed 3.500 – 5.800 R.P.M Saw blade Ø 400mm Profile width max 200mm height max 120mm...

... - 1.5m electrical connection cable - 1.5m gas connection tube kit - Adjustable pressure reducer from 0.4 to 1.5 bar - Handle and transport wheels (model KA 105 A) - Option to apply an external ambient thermostat Applications: Industry, greenhouses, farms, drying processes, etc.

...However, the use of CO2 leads to higher operating pressures potentially up to 130 bar. SANHA Ref HP fittings are specifically designed for such operating pressures. They are ideally suited for pipes in refrigeration systems with a maximum operating pressure of up to 130 bar (other pressures on request), a minimum temperature of -196 ° C and a maximum temperature of 150 °C for fluids in Group 2 according to European Pressure Equipment Directive (PED 97 / 23 / EC). Reducer...

... valve, the energy of the steam is not utilized due to throttling. Our small steam turbine takes advantage of the pressure difference by converting the energy stored in the steam into electrical power through the turbine stage and the generator. A control mechanism ensures that the target pressure for the steam consumer is safely reached and maintained.

... the point of use for applications such as: washing machines, painting, food industry, and sterilizers. The series includes versions DN15, DN20, DN25 and has an adjustable secondary pressure between 0.14 and 8.6 bar.

...VOGELMANN ROTAMETER - BOTTLE REDUCER WITH ROTAMETER ARGON / CO2 PRESSURE REDUCER ROTAMETER. A universal gas regulator with a rotameter by VOGELMANN allows you to reduce the pressure of gases taken from the cylinder to the required operating pressure. It allows the self-actuation of pressure at the possible constant level, regardless of changes in inlet pressure. APPLICATION. Single-stage reducer...

... agriculture Configuration with 3 membranes in NBR On request, membranes in Desmopan® and Viton® Heads and Collectors made of plastic (polyamide) Safety valve and protection p.d.f., on request (Pressure reducer and protection for the drive shaft not included)...

...Silicone Reducer Connector High-Quality Silicone Hose Connectors With the reducer connectors from Technikplaza, two hoses can be easily connected. The liquid is gradually transported through them. This is particularly useful if you want to extend your current hose. Technical Information: - Wall thickness: 4.5 mm - with polyester inserts - Maximum working pressure: 5.8 kg/cm² - Burst pressure...

Development and manufacturing of energy-efficient and low-emission burner systems for industrial furnaces, dryers, and afterburning systems. Gas regulation lines, hot gas generators as complete systems.

...Pressure regulators for all applications and cylinder sizes, made from robust brass or stainless steel. For proper handling and according to the intended use, we can offer you countless fittings. Due to the variety of connection options, we kindly ask you to contact our sales team to find a suitable solution together.

...Nipple, Elbow, Brass T, Reducer, Proportional Nipple, Blind Plug, Silencer, Accessories, Radiator Cable Glands, Hose Accessories, Extensions, Clamps Conical Fittings, Hose Wraps, Proportional Nozzle, Wrap Reducer ** /Casing: Brass (CW617N-CuZn40Pb2) /Connection: Gear /Maximum Operating Temperature: 120 ºC /Maximum Working Pressure: 16 Bar *** Application Scope: In hot and cold water systems Nominal Diameter DN: DN15-DN100 Connection Type: Thread (Male & Female) Pressure Class: PN10-PN16...

...Pressure reducer 300/200 bar A pressure regulator for filling 200 bar compressed air bottle with a 300 bar connector. The high-quality pressure reducer consists of corrosion-resistant, massive V2A- housing, robust DIN- valve (approved in compliance with EN 144) and has an overpressure valve (response pressure: 225 bar) No modification of compressor necessary! Datenblatt...