power off closed

... switching cycles (up to 500,000), fast switching (10 ms), and space-saving design. Please Note: The solenoid valve gets very hot in operation, up to 80°C. 100% duty cycle is possible. Technical Data: M-1-24-C Temperature: -30° to 150° C Thread: G-thread Pressure: 10.0 bar Kv Value / Cv Value: 10.28 / 12.00 Coil Power: 22 W Weight: 970 g Opening Cross Section: 25.0 mm Protection Class: IP65 Seal: Viton Switching Cycles: 500,000...

...Electric Meat Tenderizer (includes slicer) A perfect aid for catering businesses Ensures uniformity of results Production at 75 revolutions per minute Maximum meat size 180x20 mm On/Off switch The device only starts after the hinged lid is closed Easy to clean Non-slip feet Quality Made entirely of high-quality AISI 304 stainless steel Slicer Produces thin slices of meat Perfect for finely...

...Direct mount to short taper so adapter isn't needed Cross guide reduces runout and distortion Ideal for irregular shaped components Independent jaws allow for off centre holding Kitagawa IA 4-Jaw Closed Centre Chuck have a steel body and direct mount. Supplied with reversible hard jaws for ID and OD gripping. Estimated delivery:On Request...

... connectors, welding flanges, weld-on nipples, pipe angles, hose pipes, groove couplings, reducing couplings, reducing pieces, Housings and valve bodies for valves, high-pressure valves, stainless steel valves, nuclear valves, shut-off valves for the energy and chemical industry, food processing, energy plants, thermal power plants, hydrogen applications, highly corrosive media, seawater, acid-resistant...

...-phase power supply between 200 and 480V - Digital inverter - Solution only in 1 or 2Q - Possible braking via chopper and resistor - Power between 0,37kW and 22kW - IP20 protection - Modular drive - We have a stock up to 22kW in single and three phase CLOSED LOOP REGULATION - Single and three-phase power supply between 200 and 500V -Digital dimmer -Solution only in 1 or 2Q -Braking possible via chopper and resistor -Power between 1,3kW and 900kW -IP00/IP20/IP54 protection -Modular drive We have a stock up to 160kW in three-phase 400V" ...

... protected from short-circuit and overload. The short-circuit current is limited by the output transistor switching off inthe event of a fault. It will automatically reset as soon as the fault has been remedied. The switch is available with ground-connected, plus-connected or potential-free DC switching output. The switch is open in the event of power failure or disconnection of the power supply, independed of the switching function. It is available both as normally open (NO) or normally closed (NC) switch.

...The vertical turning machining center is designed as a portal structure. The two columns and the crossbeam form a closed frame with the foundation, ensuring high rigidity and accuracy. The capabilities of the milling and drilling unit can be expanded with the option of a movable rotary table (Y-axis), allowing for the machining of complex workpieces that require off-center processing. A large...

... Reservoir Fill with Automatic Shut-off SO2 Injection System High voltage kit High capacity oil: water separator External condensate collection system(to check collection rate of fog with cover closed) Air actuated cover, automatic ambient Solution spray (direct impingement) Power exhaust kit Water fog, automatic Custom sizes (extra height or any LxW) and configurations (pass-through electrical...

...This valve protects pumps and pipes from pump startup and shutoff pressure surges due to power failure. Pump off means valve normally closed. If pump starting cause pressure surge, the pilot smoothly opens the valve to limit pressure rising.

... outward with panic bar.","l":"Complete blackout option available with blinds.","n":"Dimensions in mm:\n --> closed 6058 x 2438 x 2591 (ISO 20'-1CC standard dimensions)\n --> opened 6058 x 6774 x 2591 h.","o":"Total weight approximately 5,500 kg."}...

... exhaust shutdown controlled by the machine Maximum Speed:1500 mm/s X-axis, 800 mm/s Y-axis, 60 mm/s maximum recommended cutting speed* Maximum Acceleration:20.000 mm/s² X-axis, 4000 mm/s² Y-axis Accuracy:0,1 mm cutting, 420 dpi engraving* Laser power:90-100 W / 130-150 W Optimal power load:90-100 W / 130-150 W Optimal power load:12-85% Life Expectancy:≥ 10.000 hours at optimal power load Maximum cutting capabilities (at optimal power load) 90-100 W:15 mm acrylic, 6 mm MDF Maximum cutting capabilities (at optimal power load) 130-150 W:20 mm acrylic, 8 mm MDF Included optics:50,8 mm and 101,6 mm...

... (51200 steps per revolution) – Management of TTL encoders, Sin/Cos, Hall effect sensors, or resolver – Dual-loop control and absolute encoder management (SSI or BISS) – Communication RS232 or CAN (TMLCAN, CANopen) – 2 safety inputs STO (Safe Torque Off) – Optional EtherCat bus – Compact dimensions: 139x94x16 mm...

...Surface-mounted room thermostat, super flat, white, power-off closed, with thermal feedback Operating pressure: Max. 4.0 bar Operating temperature: -10 °C - 80 °C...

... Temperature":"- 10 °C to + 50 °C","Protection Class":"3","Power Off State":"NC (normally closed), NO (normally open)","Switching Time according to ISO/CD12238":"nominal 5 ms/5 ms","Installation Position":"any (preferably anchor orientation vertical)","Operating Voltage":"12 V DC, 24 V DC","Relative Duty Cycle":"100 %"}...

... additionally encapsulated - Electrical connection with cable (open cable ends with test plug). Note: The number of revolutions is recorded in a counter. The position value is stored when the power supply is cut off. In the powered-off state, the position value is recorded when the shaft is moved within a range of ≤ ±90°. Incremental or absolute: Absolute Interface: CANopen Single-turn or multi...

...Infrared space heater (electric) – This space heater gives off a comforting warmth and is available in two power ratings (1400 watts and 2000 watts). The space heaters can be integrated in the ParaKing (up to 6 m) so they remain inside the sunshade when closed. This means no more tedious installation. It is also possible to mount them on the profiles of our windbreak walls. This light warms up...

... automatically when there is a pressure drop in the distribution line (i.e., when a dispensing gun is opened) and stop as soon as pressure is built up in the line again (i.e., when a dispensing gun is closed). Delivery: 230 V AC Fluids: Aceiet Power: 600 w Current: 3.8 A Delivery: 10 l/min (2.6 gal/min) Maximum outlet pressure: 10 bar (145 psi)...

...on and off delay, and hysteresis can be freely set within the measurement range. Switching points: -20 ... +125°C, adjustable Connection: G ½, G ¾ AG, ½", ¾" NPT stainless steel Display: 3-digit LED Electrical connection: M12 x 1 connector or cable Power supply: 24 VDC Contact: 1 or 2 semiconductor PNP/NPN, normally open or normally closed adjustable Accuracy: ±0.5°C (-10 ... +85°C)...

... Specifications Weight adjustment by hand wheel • The main body is made completely stainless steel • Drum surface chrome plated • Piston slot is made of stainless steel. • Vacuum piston is made of anti-oxidation material. • 24 V Control board • Closed circuit lubrication system. • Piston moves to discharge position automatically when the machine shuts off • 70 kg. hopper capacity • Stainless steel lids. • Belt/pulley power transmission system...

...Leo B1400B90 Drive, a new high-performance closed-loop servo drive controller suitable for Servo and BLDC motors. It has been designed with efficiency in mind and incorporates optimized control algorithms to provide the perfect trade-off between efficiency and performance. It represents the latest generation of servo drives that offer best-in-class performance in compact housing, has a high level...

...Triflash Panel 3-position switch: off, day/night (auto), night Minimum autonomy of 3 days With handle Feet with automatic locking in open or closed position Delivered with 2 weighting bags Made in France Ideal for signaling all temporary hazards day or night Class 1 Standards: lights conforming to class L2H according to paragraph 4.1.1 of standard EN 12352 The assembly mounted with the triflash...

...Push button equipped with an LED to provide visual feedback to the user, with a button diameter of 19 mm. The LED is powered by 12V DC. Cut-off power: 250V AC and 2 amps in alternating current, 24V DC and 1 amp in direct current. When the push button is activated, the NO (normally open) contact closes and the NC (normally closed) contact opens. The installation can be done either surface...

...material (pipe connection): stainless steel - material (valve housing): aluminium - material (slide plate): PET - compressed air supply: 1/8"; 6 bar; oil-free and dry - power supply: 24 V DC The pneumatic fittings and the magnetic valve are complete assembled. One pneumatic adapter (6 and 8 mm) is enclosed. The valve is power-off closed. Ø P B L H AS.10.040.01.024V 40 1/8" 74 310 170 AS...

...Technicial Specifications: 1. Revision year: 2020 2.Cylinder diameter: 660 mm 3.Cylinder length: 2130 mm 4. Roller opening range: 1-15 mm 5. Motor power: 200 kW 6. Engine-gearbox transmission type: Direct coupled 7.Transmission between gearbox and mills: Flywheel gear 8. Bearings: Bronze 9. Lubrication: Automatic 10. Cooling system: Closed circuit water cooling system with rotary...

... safety with SM2-NDP-OX-EOP - Power-off locking - Upon application of the release control voltage, the safety contacts open - The door is always closed - Upon opening the door by the operator, the auxiliary line closes - Upon request, we can deliver the transmitter with fixed counter plates and equipped with a silicone seal for compatibility with the food industry...

Orbitalum Tools develops and produces portable pipe saws, pipe beveling machines, pipe end processing machines, orbital welding machines, as well as open and closed orbital welding heads. The machines are primarily used in the food, chemical, pharmaceutical, and electronics industries, as well as in power plant, pipeline, and shipbuilding. The wide range of products is constantly tailored to...

...distribution; project engineering; design; implementation; monitoring of photovoltaic systems of all sizes in grid feed-in; off-grid and hybrid technology; establishment and management of proprietary closed solar funds.