... - Pendulum roller controllers This capacitive DC/DC angle sensor with integrated amplifier requires only a DC voltage for operation and provides an output voltage proportional to the angular position of the shaft. The shaft can rotate clockwise and counterclockwise with a permissible angular velocity of up to 18000 °/s (optional). A high-precision differential rotary capacitor is used to convert the angle...
Germany, Otterfing
... with high temperature, pressure, and aggressive media. The devices of the SLX Series are perfectly equipped for use in this area and guarantee the highest reliability and lifespan thanks to their extremely robust construction, a completely sealed stainless steel housing, and high resistance to media and temperature. Key Features ■ Measurement ranges 10...300 mm ■ Linearity up to ±0.10 % of the measurement range ■ High protection class IP68/IP69K ■ Operating temperature sensor up to 200 °C ■ High resistance to aggressive media ■ Custom designs...
Germany, Mülheim
...Measuring tasks can be solved with different sensors. The inductive linear position sensors operate contactlessly and wear-free based on a revolutionary measurement principle. The position is not detected via a magnetic position transmitter, but through an inductive oscillating circuit. Magnetostrictive linear position sensors for position detection in hydraulic cylinders or linear position...
...Pneumatically operated swivel fittings and valves with linear actuators are often used in conjunction with position sensors. Depending on the type of device, micro or proximity switches are used. They enable reliable end position feedback and can be equipped with a fieldbus connection (e.g. AS-Interface, DeviceNet, etc.) on request.
Germany, Bad Münstereifel
Spain, Barakaldo
...RTD type temperature probe, configurable. It is normally installed in pipes or tanks with the thermowell from the MY03 SERIES. It has the advantage of stopping at the bottom of the thermowell and also being able to orient the head to the desired position.
Germany, Buchenbach
...Absolute position sensor for hydraulic cylinders, telescopic cylinders, and piston accumulators, based on proven cable pull sensor technology. Durable, reliable, and robust. Developed with over 30 years of expertise in cable pull sensor technology. Measurement range 0 … 5000 mm (196.85 Inch). Absolute measurement system. Pressure-resistant up to 350 bar, pressure peaks up to 650 bar. High flexibility, adjustable to any measuring length thanks to Teach-In. Redundant interfaces available. Safety version usable up to Performance Level d. Interfaces: Analog, CANopen, SAE J1939, CANopen Safety.
... profiles are the best solution for sensor housings for level measurement in aggressive, acidic media or at high temperatures. The high-precision hollow chambers accommodate the sensitive sensors and position them at an exact, consistent distance. The plastic used reliably protects the enclosed sensors from acids, bases, and solvents. The material polyphenylene sulfide with 40% glass fiber reinforcement is processed into sensor profiles with very smooth surfaces.
Germany, Steinfurt
...Acutronic. Using multi-axis inclination tables (rate tables), we can precisely position test specimens in End-of-Line (EoL) testing or for development purposes, calibrating and testing them under temperatures ranging from, for example, -40°C to 120°C. Merecs Engineering can additionally connect the testing system to the customer's IT infrastructure, set up databases, and establish automatic data...
Germany, Hamburg
...The PR 6202 is the world's first load cell designed strictly according to hygienic design principles for weighing tanks and silos developed by the European Hygienic Engineering & Design Group (EHEDG). - High overload protection - Automatic return to upright position after deflection - Easy adjustment of corner loads thanks to matched output technology - Stainless steel construction - Wide...
Germany, Wimsheim
...Sensors for detecting excessive movements of vehicles on roller test benches. Integration into local emergency stop or safety circuits. A safety sensor sensitive to tension, pressure, vertical, and horizontal movements on a flexible stand with a solid base plate is easily positioned near the vehicle. Potential-free NC and NO contacts. Various versions with different stand sizes can be offered.
Germany, Ortenburg
...Solid and compact aluminum pressure housing with polyester powder coating Optical position indicator for screw removal Two cable entries Shaft and mount made of NAMUR-standard stainless steel Easy adjustment without tools Technical Data: BZA-LS-T2-DB Coating: Chromatic polyester powder coating (Black) Housing: Weatherproof IP67 / NEMA A4 & 4X Cable entries: 2x NPT ½" Temperature: -50 °C ~ 80 °C Terminal blocks: 8 points (0.05 – 2.5 mm²) Position indicator: 0° ~ 90° (90° freely rotatable) Closed: red Open: yellow Switch: 2x mechanical switch 2x proximity sensors Switching cycles: 30,000 Seal: NBR...
France, Fontaines Les Gres
...The system's accuracy, repeatability, and speed of movement depend on the associated electronics. Plug-in connection to position indicators 21700 and 21702. Protection class IP 67; EN 60529 (sensor head) Shock resistance 2000 m/s², 11 ms; EN 60068-227 Vibration resistance 200 m/s², 50 Hz…2 kHz; EN 60068-26 Mounting is done using the attached operating instructions. A) sensor/strip reading...
...The Sensor Connection Workpiece, specially developed by Üçes Makina for industrial applications, is designed to ensure the safe mounting of sensors used in various industrial and defense projects. This part provides the secure fixation of sensors in the correct position and protects them against environmental factors in applications that require high precision and durability. Produced using...
Germany, Kornwestheim
...This tactile sensor determines the position of the workpiece or its assemblies and individual components by scanning the surface of the workpiece.
Germany, Gschwend
... particularly suitable for the static testing of impact tools, torque wrenches, electric screwdrivers, etc. of various designs. Together with the ETH evaluation device GMV2, even torque breakaway wrenches can be measured without distortion of the measurement result due to over-torquing. The torque sensor can be mounted with the mounting flange in any position according to the tool being tested. Various adapters are available for tool attachment, allowing the tool to be tested with or without a socket wrench insert. The measuring shaft of the torque sensor is equipped with strain gauges.
France, La Wantzenau
...Housing: GS55 80 x 80 mm Cable 0.45 mm Stainless Steel Mechanical protection IP50 Sensor protection IP65 Linearity 0.1% PE Analog signal: 4-20 mA 3 wires 600 Ohms Range setting via rear push button 0-100% Power supply 18-33 Vdc Current consumption <80 mA Resolution 16 Bit Connection via 1 meter cable and Binder M8 connector.
...In this unit, four systems of a path sensor are magnetized simultaneously. A special design shields the carrier parts against parasitic magnetization. The magnetization devices are integrated into the automatic line. The cycle time is approximately 5 seconds per part. The entire handling system was also designed and supplied by us.
...Application: Position detection on hydraulic steering cylinders Robust customized sensor, NOVOPAD non-contacting inductive measuring principle. - magnetic field resistant - redundant for safety category 3 / PLd - non-contacting position detection - protection class up to IP 69K Automotive-Applications.pdf For more information please contact: automtive@novotechnik.de, +49 711 4489-197...
...Article Number Description Note Use / Function DS0220000 Sensor Position Gate Threaded Design M12x1, incl. 6m Cable, OF 5070 Function: Locking Gate / Bridge Interested in this product? Order directly in the online shop using the article number!
Germany, Weissach
...Cylinder series with dimensions based on ISO 15552 with an integrated position measuring system based on magnetostriction. The position sensor allows a high degree of accuracy in measuring the cylinder position. Analogue output signal 0-10 V via M 12 connector.
... threaded models and sensors with smooth sockets. Proximity sensors operate on the proven inductive principle and switch without contact when approaching a metallic object. Proximity sensors are used for presence control, position and motion monitoring, as well as counting objects and speed control on conveyor belts.
Depuis plus de 30 ans, Visionerf conçoit et développe des solutions de vision et de traitement d'images pour l'automatisation de tâches diverses dans le processus de production. Visionerf est créé par une équipe d’ingénieurs passionnés ayant pour motivation d’appliquer le traitement d’images automatisé au contrôle en industrie. En 1990 réalisation d’un premier calculateur électronique dédié, bas...
Switzerland, Rossens
...The DI displacement sensor range allows for non-contact measurements of the absolute position of hydraulic or pneumatic cylinder pistons, as well as in other applications. Built robustly, shock-resistant, and ensuring a very long lifespan due to the absence of moving parts that cause wear, DI sensors are both economical and highly reliable. Magtrol sensors are designed to operate across a wide...
Germany, Nürnberg
...Rotary position sensors of type DWA are mechanically connected rotary position encoders. They measure the rotary position in accordance with the ohmic principle. These rotary position sensors are suitable for measuring the rudder or pitch position, for example. Mechanically connected rotary position sensor, ohmic principle. 360° rotation angle without mechanical limitation. Reference...
France, Saint-Rémy-De-Provence
... m. When placing your order, please specify your desired type of remote control (infrared remote control is highly recommended for any home cinema application – radio frequency remote control is recommended for all other applications). Difference between IR and RF remote control: With the IR remote control, it is necessary to position the generator's sensor in your dedicated cinema room; the RF remote control can operate your generator in adjacent rooms. WARRANTY: 2 years Supplied with a 5 V power adapter. SKU: KFOAT1 WEIGHT: 1.5 kg...
Germany, Wernau
...Multifunctional LT80 display with interface modules and clearly structured user interface for evaluating measurement values from up to 16 channels. Connection of up to 32 DK or DT sensors (DT sensors with MT adapter) Easy installation on DIN mounting rail High-speed triggering module When a rotary sensor with TTL output pulses is connected to the triggering module, measurement values from up to...
Austria, Gleisdorf
... During operation, the filled bags are transported to and from the bag closing system via a conveyor belt. A sensor detects the position of the bag and automatically puts it into the trimming area. After cutting the top edge of the bag a woven PP tape is applied over the open edge of the bag to seal it with hot air. The hot air to seal the bag airtight and odourless is produced by a heating unit...
Germany, Markgröningen
... motorized adjustment and positioning tasks. The pre-tensioned worm gear operates nearly play-free. The bearing of the worm shaft provides the highest radial rotational accuracy. The large bore in the hollow shaft allows for the passage of lines. With the adjustable positioning ring, the rotational reference point can be set arbitrarily to the position of the mounted component. Mounting of...
Popular countries for this search term

The europages app is here!

Use our improved supplier search or create inquiries on the go with the new europages app.

Download in the App Store

App StoreGoogle Play