position sensor

...Available with steel roller conveyor widths of 450, 550, or 650 mm. This stop (located on the right side of the machine) moves along a column on the roller conveyor. Steel rollers with widths of 450, 550, or 650 mm. Position determined by a magnetic rule system and sensor with digital display on the control panel. Motorized movement of the stop via a gear motor and friction wheel. Pneumatic...

... assembly - Automatic process via an integrated sensor (no start button or foot switch required) - Automatic groove position adjustment - Special application pieces - Custom designs possible (e.g., molded seals)...

... necessary. The DVR-120 is small, easily concealable, and can be installed in a position within the vehicle that is out of reach of potential aggressors. Anti-vibration, input for two cameras. Recording on SD Card up to 128GB. The duration of the recording depends on the capacity of the SD CARD and the quality of the recording. 32GB SD Card included (Supports SD Card up to 128GB) H.264/30fps External GPS 3G sensor Power supply DC12~24 Max consumption.

...coils, fuel pump, etc.). It allows technicians to perform factory maintenance procedures such as resetting the service light, unlocking the immobilizer device, and configuring the immobilizer/alarm device, injection adjustments (CO Trimmer), and adjusting the throttle position sensor (TPS),...

... powerful minimum sample weight, as well as very high weighing accuracy and precision. This allows users to analyze a variety of sample types at temperatures of up to 1600 °C. An additional DSC heat flow sensor captures thermal events such as melting and crystallization processes, ensuring accurate and precise transition temperatures.

...The infrared sensor detects individuals and triggers the light. The device identifies day and night and adjusts the lighting based on ambient brightness. When the LUX slider is in the SUN position, the lamp will operate under any brightness; when the slider is in the MOON position, the lamp will only function when the indoor light is below 3 LUX. REF:ST51 Detection range: 180°...

... (seated position) Continuous height adjustment of the knee stabilizer (seated position) Continuous adjustment of the knee stabilizer via pneumatic springs (seated position) Continuous adjustment of the lever bar length Adjustment of the start position in 10° increments Very fine weight gradation in 1 kg increments Rotatable and tiltable SmartPanel with training software Measuring sensor for isometric measurements Measuring sensor for measurement of mobility Protective panel made of frosted glass Options Pre-installed network equipment in compliance with the German Medical Devices Act...

...Optical Systems, Matrix and Line Cameras, and Sensor Technology What cannot be seen with the naked eye: We provide you with optical systems for precise specification of your sorting characteristics. Applications: - Inspection and counting technology, - Detection of qualitative features (color and contrast), - For internal or non-mechanically usable sorting characteristics, - Simple position detection, - For signal processing.

... position checks, and testing safety systems Connection for an external USB-TERPS sensor possible Connection for an external IDOS pressure sensor for range extension possible (via adapter IO620-IDOS-USB) USB interface for data exchange and connection of the optional IDOS sensor Compatible with Intecal V10 and 4-Sight software Extensive accessories available...

... control - Control of the injection of screws, nuts and other elements Tool chipping In order to achieve higher cost effectiveness of maintenance, we equip replaceable tool parts with RFID chips. The data that the buyer reads with the RFID reader is transmitted from the server of EMO Orodjarna. In this way, the buyer can read with the RFID reader all the necessary information required to produce or order a new position at EMO Orodjarna. Virtualization of tools Enhanced reality and virtualization technology enables greater reliability and repeatability of the work process for the buyer.

...-directionally working in pipes, whereby an operating pressure of 1.2 bar abs. and an operating temperature of 60 °C must not be exceeded. All sizes are tested against “stabilized burning” and withstand this up to a max. burn time BT ≤ 30.0 min. To detect a “stabilized burning” a temperature sensor must be installed at each endangered side. Mounting is acceptable in any position, in horizontal as well as in vertical pipes.

... well as cleaning detergents used for the machine. Therefore, it is easy to clean this grinder and maintain optimal hygiene of the equipment. This machine is also very secure as it has a sensor that ensures the head is properly closed before starting, preventing operation if the machine is not locked in its working position. Additionally, it features a waterproof start/stop button that protects...

... particularly powerful minimum sample weight, as well as very high weighing accuracy and precision. This allows users to analyze a variety of sample types at temperatures of up to 1600 °C. An additional DSC heat flow sensor captures thermal events such as melting and crystallization processes, ensuring accurate and precise transition temperatures.

... receiver. In indoor conditions where GPS signal is weak P21 uses GSM network to determine device location using triangulation technique. The device can be used in real time mode or sleep-wake up modes using simple @SET commands. In sleep-wake up mode P21 may send periodic location messages from 1 minute to 24 hours. This way the device may operate up to 3 months with single charge. P21 is compatible with high precision digital temperature sensor. This makes P21 an ideal choice for cold chain goods monitoring applications.

... sensor detects the fed sheets and automatically takes action. Maximum accepted formats: 330.2 x 468 mm Minimum accepted formats: 110 x 210 mm Dimensions: (H x W x D) 400 x 500 x 500 mm Power supply: 220-240 V/50 Hz Weight: 20 kg...

...1/4" color CMOS - high-resolution color camera module (420 lines) - wide-angle lens - swivel range: +/- 120° - endless rotation FEATURES - Parallel Laser for measurement functions - automatic horizon leveling - automatic zero position - automatic 90° left/right swivel function - automatic 360° inspection function - internal pressure monitoring - electric remote focusing - monitor overlays: rotation and swivel angles, - internal pressure in bar with alarm function for pressure drop - available in PAL or NTSC Specifications: Item No.: 5-0033-001 Item Number: 5-0033-001 Type: Swivel Head Camera...

...The system automatically detects the position of steering valves in load carriers and installs them with force monitoring in rack and pinion steering systems. Additionally, the rack is lubricated and the support bearing is supplied within the system. An industrial robot is used for handling, equipped with an imaging system and a force torque sensor. The entire application is fully integrated into an existing assembly line and operates in a three-shift system. The result: consistently high quality at a 23-second cycle time and a reduction of the scrap rate to a minimum.

... chamber technology Adjustable ventilation speed Humidity control with capacitive humidity sensor and steam humidification Intuitive touchscreen controller with sequence and real-time programming Internal data logger, measurement values can be read in open format via USB Device self-test for comprehensive status analysis Hermetically sealing inner door made of safety glass (ESG) => More information in the technical data sheets below Volumes: 240 and 698 liters Doors: 1 or 2 doors Temp. / Temp. with lighting: 0°C to 70°C / 10°C to 60°C Humidity range: 10 % RH to 80 % RH...

... solution to enhance this communication and make it particularly noticeable. Integrated into the outdoor communication materials we manufacture, this display system truly comes into its own and reveals its full effectiveness. Moreover, it is exceptionally simple, allowing you to manage the displayed prices in real-time with just a remote control. With a range of 80 meters in open terrain, this operation is particularly easy. Additionally, it is equipped with a twilight sensor.

... Control for the Strip and Container - Speed Control for all Axes - PLC Control - Module for Remote Connectivity (Optional) Safety: - Emergency Stop - Progressive Start Valve - Double Pneumatic Safety Valve with Sensor via Limit Switch - Safety Relay - Perimeter Safety Bar Quality: - Designed for the industry according to European standards - Machined parts in our machining centers - Structure cut by laser and bent by CNC - Original pneumatic components from top brands - Non-contact position sensors for actuators...

...Simple and well-organized adjustment of the different units: - Saw and scoring saw adjustable in height and tilt via handwheel with display. - Independently adjustable scoring saw in height and lateral position. - Planing table adjustable in height via handwheel with display. - Height adjustment of the spindle moulder with display. - Various safety switches. Technical Description Circular Saw...

... the dimensions of the table - Max height of the wrapper (including pallet): 2400 mm - Optical sensor for scanning pallet heights - Gradual start and stop of the turntable rotation frequency - Speed controlled by frequency of the turntable - Speed controlled by frequency of the lifting slide - Turntable stops in the starting position - Easy to use...

... Ready for application, water-based, without silicone. When using CE15V+ customers benefit from increased productivity through safeguarding of the clamps’, minimization of cleaning time, and longer service life of jigs and fixtures due to reduced mechanical stress during cleaning. Further advantages • Long-lasting protection agent that facilitates cleaning • Tested and approved for cataphoresis • Prevents sensor failures • Tested and proven in the automotive industry • Maximum process safety for users and environment. Accessories: Sprayer HSP4K, drain valve, pressure-Sprayer.

...ATEX type PNP 3-wire magnetic sensors (switching on the positive potential load), with an M12 connector at the end of the included 30 cm cables. Sensor from the AIRTEC brand, series ZS-7302. The detectors are activated by magnetic fields; they detect the position of the piston located inside the pneumatic cylinder. They can be mounted in grooves present on certain cylinders or on supports...

...Control Cabinet LED System Light for optimal illumination of the control cabinet with easy mounting and through-wiring, motion sensor, door position switch, with control for the air conditioning unit. Control cabinet lights from 325mm to 1050mm 8-29W and 800-3500Lm 90-240V AC, 120V 60Hz, 210-240V or 24V DC available upon request. Whether it's a motion sensor or a door position switch with a...

... width with frame 3000 mm: 2900 mm Band motor power: 3/4 HP Band motor speed 400 Volt 50 Hz: 1400/2800 RPM Motor power for table up-down: 0.5 HP Diameter of abrasive belt pulleys: 200 mm Table width: 800 mm Electric vertical movement of the table: 550 mm Peripheral speed of the belt: 22/44 m/sec Work table (in fixed position) capable of supporting a weight of: 120 kg Net weight: 400 kg...

... messages • Field programmable engineering units • Magnetic sensor technology immune to problems related with dirty oil • Configurable to control based on rate of flow or valve position for applications where the Process Variable (PV) is Dew-point, Carbon Potential, etc. • Standard Modbus TCP for easy integration with control systems • Manual actuation of value possible • Field calibration for null and span • Advanced polynomial calibration for high accuracy over the entire range of the meter • Built-in Web Server with remote access to device • Full PID setpoint control The VALVE-TRONIC Plus™...

...To operate touchless water fittings in an energy-efficient manner, pilot valves from Staiger are used. These valves, powered by micro batteries, only function when activated by an electrical impulse. Any hand movement in front of the sensor triggers this impulse and starts the extremely robust pilot valve. After water consumption, the valve returns to a resting position. Robustness, durability...

... belt conveyor to the upper end position, allowing for the box change to take place. In the new, non-magnetic version, the workpieces are transported into the box using a studded belt. The inclined section can optionally be equipped with an overhead safety curtain to provide additional protection against the falling of workpieces.

...This fan speed controller is used to control EC fan speed. The unregulated output can control a water valve or an electric heating element. Via the rotary knob the temperature can be set between 5 - 35°C. Fan speed is regulated manually in 5 steps, there's an Off-position and automatic mode. In automatic mode a temperature sensor PT500 is required. Choice between cooling/heating mode can be done via Modbus communication or a jumper. This controller can be connected to our SenteraWeb or a BMS-system. .