polyimide

... elements made of Polyimide (Kapton) are an ideal solution for many critical applications. Kapton foil heaters are also silicone-free and are characterised by an even heat distribution. The dielectric strength of a Polyimide film is very high and so the flexible Kapton (Polyimide) heater can be very thin. Due to the small thickness, the heat transfer to the component is improved and higher surface...

...Polyimide adhesive discs 260 °C...

...PRODUCT DESCRIPTION Heat Resistant Tape Kapton Polyimide Adhesive Tape High-quality polyimide film as the backing material, featuring excellent high-temperature resistance and mechanical properties. FEATURES * Polyimide film tapes coated with adhesive * High temperature, solvent resistant, stable and reliable * Easy peel with no adhesive residue * Class H insulation PCB and transformer insulation * High-temperature adhesive tape * Heat-resistant tape * Silicone adhesive tape...

...3000M25/850N201/00 - Polyimide(PI) track-etched membrane filter Pore size: 0.20 µm | Pore density: 5.00 E+08 /cm² | Porosity: 15.7 % | Thickness: 25 µm 90° parallel pores | translucent PVP treated (hydrophilic)...

... mechanical properties even at elevated temperatures and low wear, as well as a long service life. The polyimide rod can be continuously used at temperatures up to 350 °C and has various applications in the automotive, aerospace, and electronics industries. Polyimide rods have a standard length of 965 mm. The diameters of the solid rods range from 6.3 mm to 82.5 mm.

...The Industrial TactArray is a flat sensor that can capture and map pressure distribution in even the most extreme conditions. Constructed from high-quality Kapton or Polyimide, the Industrial TactArray can pressure distribution of up to 700 psi and in temperatures between -40° C and 200° C. This system is best suited for use in applications requiring tactile sensors that can withstand extremely...

... that we have the best choice for you. As primarily film-based products, these high-temperature tapes are malleable and flexible, meaning they can be used in delicate areas where there are many sharp corners. Discs are also available that can be used to seal and prevent small holes, such as screw holes, from filling during the coating process. For our complete selection of powder coating tapes/high-temperature tapes, please see below. Available Variants: - Matte Fabric - Polyimide - Polyester - Glass Fabric - Paper...

Röchling Industrial UK Ltd has three manufacturing sites dedicated to plastic machining. We manufacture bespoke parts – everything from micro to massive. We have the widest range of machining capabilities, materials, and manufacturing capacity in the UK. Our services include: • Material selection advice (we have > 150 different materials to match your requirements) • Bespoke machining, from proto...

...Spiral cables and cords axospiral® can be used for any electrical connection involving portable devices and moving equipment where flexing would cause damage to conventional wire and cable constructions. Axospiral composite cables have many advantages : flexibility, space saving, resistance to heat, chemicals, solvents. Axospiral wires and cables insulated with FEP, PTFE, ETFE, PFA, polyimide...

... material series DuroBest ® 110 - 280 offers you hard papers (Hp) and hard fabrics (Hgw) according to DIN 7735 and DIN EN 60893. Balanced resin systems based on Phenolic, Epoxy, Melamine, Polyester, Silicone, and Polyimide combined with high-quality carrier materials such as cellulose, cotton, aramid, and filament glass fabrics form the backbone of these composite high-performance materials...

...Base Material • FR4, FR4 High TG, FR4 Halogen-free, CEM1/3, Rogers, Ceramic (Al2O3), Polyimide, and others Technical Specifications • Max. panel size up to 1500mm x 670mm • PCB thickness from 0.1-17.5mm • Smallest hole 0.075mm • Smallest trace/spacing 50µm • Copper layer up to 1000µm • Number of layers up to 58 • Aspect Ratio 20:1 • Rigid-flex and Flex • Via plugging • Impedance control • Laser...

...Polyimide Adhesive Tape - Polyimide Adhesive Tape 7170 Article Number: 7170 Color: gold/yellow Adhesive: Silicon Total Thickness: 0.064 mm Film Thickness: 0.025 mm Adhesive Strength: 7 N/25 mm Temperature Resistance: short-term up to 400 degrees Celsius, continuous 180 degrees Celsius, Insulation Class H Length: 33 m Width: from 3 mm...

... (CR) polyimide film 10) Thermal Conductive MT polyimide film Yancheng Tiandi Insulation Co., Ltd Web: https://www.polyimide-pi.com/polyimide-film.htm Email: hsinsulation@aliyun.com hsinsulation@hotmail.com Tel: +86-139-61986280 Fax: +86-515-69011600...

... plastic ideal for applications where high temperature resistance is required, such as in the aerospace industry. TECASINT 5111 natural has good chemical resistance, especially to light acids and many organic solvents. In combination with the very good electrical insulating properties of the PI material, TECASINT 5111 natural is also perfectly suited for applications in the semiconductor industry, electrical engineering or mechanical engineering. Moreover, the polyimide material has good mechanical properties, good wear resistance and is also resistant to high-energy radiation. ...

...On 75 µm / 3 Mil polyimide film with 38 µm silicone adhesive. The tape is particularly used in the electronics industry, printed circuit board manufacturing, solar panel production, 3D printing, and other manufacturing areas where certain areas need to be masked for further processing. The tape is suitable for temperatures up to 260°C and can be removed without residue after the manufacturing process. The tape is flame-retardant, tear-resistant, and resistant to radiation and chemicals.

...Kapton® Adhesive Tapes Construction: - Polyimide support film 25 μm. Class H 180°C. - Thermosetting silicone adhesive. - Kapton® = registered trademark of Dupont de Nemours. Uses: - Masking of printed circuits during wave soldering. - Insulation of copper bars on traction motors. - Masking on galvanizing parts. - Holding cables during high-temperature processing. - Briefly withstands up to 400°C.

... functions for CMP/MPP cables, aerospace, and electronics applications. Composition: Aluminum foil, polyimide foil Format: Sheets, rolls & spools Color: Natural, gold Film thickness: Upon request Film type: AL/PI Country of origin: China...

...Enamelled copper wire is a copper wire coated with a varnish, enamel, or coating. This coating can be made from various materials, such as polyester, polyurethane, polyimide, etc. The table below presents the type of varnish based on the temperature that the wires must withstand during operation. We have compiled a non-exhaustive list of applications requiring this type of wire, depending on the temperature.

...Thickness range: 12,5-125 µm high-temperature resistant Polyimide film partially high-temperature conductive Application: Automotive, Electrical Industry, Engineering Use e.g.: Kapton®, Upilex® Optics:brown/ golden-yellow, transparent...

...Copper flat and round wire, insulated with polyimide film...

...What is PEEK Catheter Tubing? Polyether ether-ketone (PEEK) is a thermoplastic polymer that can be extruded into catheter tubing with desirable properties such as high tensile strength, buckling resistance, good pushability and radiopacity.  Why would you choose PEEK medical Tubing?  Unlike polyimide, PEEK is melt processable and can be extruded into small diameter tubes for vascular...

...For a few years now seamless polyimide belts have been used in toner fusing for desktop printers and multifunctional printers. The most important advantages compared to using traditional steel or aluminum cores are: significantly shorter times lead to reach run temperatures major improvements in energy efficiency weight-saving and lower logistic costs flexible belts enable higher print speed and...

...Rigid insulating materials for use at temperatures from +155°C to +1200°C. Polyester, epoxy, silicone, and polyimide glass fiber mats. Virgin PTFE, glass-bound mica, and insulation materials made from calcium silicate. Available as sheet material as well as custom parts according to customer specifications.

...Polyester films (PET) Mylar®, Hostaphan® PTFE films, PEEK™ films, Polyimide films Polypropylene films Formex®, flame-retardant Protective and splice films, adhesive Thermal conductive films...

...Smooth paper adhesive tapes, crepe paper, PVC film, polyester, polyimide, glass fabrics, for all masking issues in painting or sandblasting, as well as for the protection of electronic circuits during soldering in a "fluid bed". Our products ensure protection and residue-free adhesive removal from surfaces and can be used from room temperature up to 200 °C. For all these tapes, we can provide die-cut rolls or individual pieces.

...The techno polymers available on the market allow us to offer you alternative solutions for parts currently made from metals such as aluminum alloys (zamak) or copper (brass). Polyarylamide PAA PARA: IXEF Polyphtalamide PPA: AMODEL, VERTON … Polysulfone PES, PSU, PPSU: ULTRASON Polysulfide of phenylene PPS: RYTON … Polyimide PEI: ULTEM … Polyamide 4 6: STANYL Cost reduction, corrosion...

...Robust cables for crash applications, custom ultralight polyimide-coated cables for satellite applications, insulated hardline cables for temperatures above 600 °C, etc.

...Plastics: PTFE, PTFCE (VOLTALEF®), PVDF, POLYIMIDE, VESPEL …...

...Filter bags with microgreen coating Temperature range from -20 °C to +250 °C, briefly up to +280 °C Product features Made from the following materials: • Polypropylene (also modified) • Polyester • Polyacrylonitrile • Polyphenylene sulfide • Aramid • Polyimide • Polytetrafluoroethylene (PTFE) • (partly with IFA or EXAM certification) Length: 0 – 20m Design: • sewn • welded • sealed Applications Compressed air, pulse jet, vibration, flushing air...