temperature controls

... rotating parts • Cost-effectiveness • Latest manufacturing technology • Compliance with all EU directives applicable to the drives • Available for explosion-prone areas • Available for 60Hz networks and other voltage supplies • Optional with temperature switch • Special designs available upon request Accessories • AViTEQ controls (voltage compensation, vibration amplitude controller, diagnostic and maintenance functions)...

... labor or long welding seams. Required electrical power: 208-240 volts - single-phase - 25 amps; 380-400 volts - single-phase - 16 amps. Air requirements: 2cfm@100psi (+12cfm if shop air). Power consumption: Approximately 6kW. Maximum temperature: Hot Air: 730ºC/1346ºF; Hot Iron: 450ºC/842ºF. Neck width: 0.86 cm (34”). Dimensions: Width: 0.6m (23”); Length: 2m (79”); Height: 1.65m (65”). Weight: 680kg/1,150lb. Welding width: 10 to 50 mm (0.5 to 2”). Welding cycle: Up to 30m/min (100ft/min).*...

... resistance to washing is required; can be washed with chloroactive detergent (detergent A); can be washed with alkaline degreaser (detergent B); can be washed with acid descaler (detergent C); can be washed with disinfectant (detergent D); resists temperature changes. Colored protective finish of concrete surfaces, cement plasters Anti-carbonation finishing of concrete structures Wall finishing for...

... manual backup control for the cover. You can select a temperature for automatic operation. 10 speeds in each direction of rotation. The first speed is silent for nighttime use. Removable and washable interior mosquito net. Operation is possible with the cover closed. NEW IN 2019: blackout interior shade with or without LED lighting. The shade is adaptable to already installed units. White, smoked...

... microplate reader (isopropanol was used as a blank). The viability rate for each experimental condition was calculated as the ratio of the average optical density of the treated cells to the average optical density of negative controls. Furthermore, the difference between the viability of the treated sample and the positive control was calculated, representing a direct index of the protective capacity of the product.

... touch display — USB interface for exporting documentation — Digital and analog interfaces as well as Bluetooth for communication with our orbital controls and other PSPS — Control and evaluation possible exclusively via the digital interface — User-definable settings for switching and alarm values — Acoustic signal generator — Color-coded display outside of target values ... Scope of delivery...

... door hinge. Heated door perimeter to prevent frost formation. Probe cycles: the temperature of the core probe controls. Required cooling capacity: 17977 W Liquid line: 3/8" [10] mm Suction line: 1/2" [12] mm Refrigerant gas: R744 GWP: 1...

...Stable and clean AC output alternative voltage with THD <2% Redundant ventilation system that controls temperature and airflow Static by-pass Efficiency in interactive line mode >98%, and in on-line mode >93% Manual by-pass switch, allowing maintenance of the inverters without disconnecting the load. Ability to support non-linear loads with minimal distortion thanks to high-frequency...

...230/400V/AC (+10%, -15%) 50/60 Hz, 3/N/PE Motor power: 0.75kW/1.5kW Rated current: 4.2A; 2.4A/7.5A; 4.2A Connection: CEE plug standard control voltage: 24V/DC, max. 2A Protection class: IP65 Housing color: Graphite gray RAL7024 Operating temperature: -20°C to +50°C Interested in this product? Order directly in the online shop with the article number!

... passes through the combustion chamber, and the hot air generated in this exchange is used to raise the temperature of the room to be heated. These devices are very useful in well-ventilated or open spaces, and their main advantage over other systems is the speed at which they reach comfortable temperatures. It is possible to incorporate a room thermostat that controls the starting and stopping of the equipment, depending on the desired temperature in the room, thereby optimizing gas consumption.

...Optimizes finishing The Orthopac VMC is a modular process control system for textile refinement. It optimises drying or fixing processes as well as the processes all about the stenter. The system measures, logs and controls critical process parameters over the entire working width like temperature, dwell time, residual moisture, exhaust air moisture, thread density, basis weight and more. This...

...Product Information "Pytes HV48100 Controller" The Pytes HV48100 BCU (Battery Control Unit) is the heart of the Pytes high-voltage battery system. It controls and monitors the entire battery bank by regulating critical parameters such as voltage, current, and temperature. The controller allows for up to 15 battery modules to be connected in series, achieving a system capacity of up to 76.8 kWh...

...Xenotest Alpha+ is a compact stand-alone rotating rack xenon instrument with 1320cm 2 exposure area. It comes serially with a complete set of parameter controls. Irradiance and temperature are measured and controlled directly on the sample level using on-rack XENOSENSIV sensor technology. Alpha+ complies with the vast majority of industry standards setting the benchmark in narrow tolerance...

...• Confirm the compliance of your process with AMS2750 and CQi-9 certifications. • Enhance performance and production by obtaining the thermal data and analyses you need to effectively adjust oven settings. • Optimize product quality by monitoring the temperature of products inside the oven. TP6100: 10 thermocouple inputs and compatibility with the widest range of thermal barriers. TP6200: 20 thermocouple inputs and compatibility with most conventional thermal barriers.

... - removable stainless-steel blade technology rinse arms for improved rinse power and coverage boiler and wash tank temperature displays - simple, intuitive controls - pressurised rinse system Insulated boilers - low water usage - double rinse zone - break tank panoramic, counterbalanced inspection doors for safe and easy maintenance access...

... required heating and cooling curves for each plastic. Thus, we can achieve not only an exact temperature during forming, but also control the cooling process accordingly to accomplish a nearly distortionless plastic. We can process plastics two-dimensional, as well as three-dimensional.

... Child safety feature for Touch Faucet "hot water" function (95°C). Convenient Remote Touch Controller for setting exact quantity and temperature. Filter's life monitoring feature. Four pre-set options and ten programmable quick dials. Available with type G plug (UK) or type F plug (EU)...

...The BS-04 can be equipped with two irradiation controls: the UV-MAT and the UV-MAT Touch. Interior chamber:86 x 65 x 32 cm Dimensions:95 x 73 x 70 cm Power consumption:400 W Lamp lifetime UVA:up to 4.000 h Lamp lifetime UVB:up to 4.000 h Lamp lifetime UVC:up to 9.000 h Irradiance UVA:8 mW/cm² Irradiance UVB:5 mW/cm² Irradiance UVC:12 mW/cm²...

... gray) as standard Mounting bosses for securing components (mounting rail, etc.) Polycarbonate model offers advantages in terms of impact resistance, UV resistance, and temperature range Configuration: flush-mounted Shape: rectangular Material: ABS / polycarbonate Applications: for electronic equipment Protection level: IP65...

...We develop and produce electronic controls for temperature regulation and control of heating elements.

...Suitable temperature controls are available for the HT furnaces. Different numbers of control zones, heating capacities, and control types ensure precise temperature generation in the heating chamber. As an example, the MSRA-61 standard control is listed below. For additional measurement-related tasks, such as signal amplification, corresponding electronics, devices, and complete systems are offered.

... support. NXP iMX6 ARM Cortex A9 single-core processor ARM NEON coprocessor 1GB of Low Power DDR3 memory MicroSD or eMMC storage devices Wi-Fi & Bluetooth optional Up to 60 GPIO lines with selectable 1.8 or 3.3 voltage levels Extended operating temperature range Android and Ubuntu Linux LTS operating systems supported...

... and power outputs which can be adjusted to meet the precise needs of your application. As well as being cost effective over electric motor controls, their air throttling and pressure control can be stalled or overloaded for long periods without damaging the motor. The non-lubricated corrosion resistant air motors by Gast are available in hub or foot mounting configurations and can operate in any position, providing complete system flexibility.

...special vehicles, overhead cranes, winches, cranes, hoists, garage doors, conveyors, hydraulic and pneumatic equipment, PLC interfaces, and many other industrial machines. F25: Designed for a variety of equipment, they offer 6 to 11 functions, particularly for needs such as lifting or steering, available at different speeds. Operating temperature: -35°C to +75°C Protection rating: IP65 Additional information: CUSTOMIZED, REQUEST ADVICE...

...What is the Thermostat effect on the Fan? The thermostat in the cooling unit controls many of the electric fans. When the temperature in the engine gets to a certain preset temperature, the fan will begin cooling the engine. When the temperature dips below that preset temperature, the fan will turn off. ...

... via PT100 • Precise temperature control • Always keep an eye on the temperatures of all heating plates • Manual or automatic operation possible • RCD for personal safety • Available with 2 or 4 outputs • Voltage 3 phases, 400V (other voltages available upon request) • Data recording to document all important parameters • (Temperature, humidity & pressure) • Optional with pipe protection frame • Touch display suitable for gloves...

... / contactless forehead thermometers - Thermometers with permanently attached temperature sensors. In accordance with the Medical Devices Operator Regulation, commercially used blood pressure monitors and fever thermometers must regularly undergo independent testing. This is also recommended by most manufacturers. To save effort, devices are often disposed of within their normal usage period and replaced with new ones. A check often represents a more cost-effective and sustainable alternative to replacement.

...The CarbonSender™ transmitter provides a cost-effective solution for carbon potential and temperature transmission (4-20 mA) to your PLC or SCADA system via Modbus RTU. This DIN rail module provides full probe maintenance / probe burn off functions and reports probe status after each test. Up to four CarbonSenders can be integrated with reference air and burn off functions for up to four probes in a single enclosure.

...Flame controls that operate permanently and comply with EN746, flow meters, air/gas ratio regulators, temperature and pressure controls, transformers, and ignition electrodes: for over twenty years, we have been developing and testing cutting-edge hardware and various electronic components in our laboratories, designed for detection and management purposes, safety, regulation, and automatic process control. A key feature is the ability to be managed both locally and manually, as well as automatically and remotely, in addition to full compliance with standards.

... AND EVIDENCE Download standard JPEGs, create reports, and share your findings via a WiFi connection to the FLIR Tools Mobile app. DESIGNED FOR YOUR CHALLENGING WORK ENVIRONMENT Lightweight and well-balanced, the E8XT camera is housed in an IP54-rated casing that can withstand a 2-meter drop in testing conditions. Temperature range: -20°C to +550°C...