internal hexagon

... flake coatings are just a few of the common finishes found on our products. The drive forms, including external and internal hexagon, cross and slotted, as well as internal and external six-lobe, ensure that our fasteners can be tightened with the required torque. Screws, nuts, washers, and locking elements, along with dowels, rivets, blind rivets, and threaded rods, represent just a small selection from our inventory.

...Plug-in system with elastic stainless steel collet – Hose assembly with one-hand operation for hoses of various materials (PU, PA) – Compact size and lightweight – Silicone-free O-rings – O-ring in sealing groove – for rough surfaces – Modular, flexible design – Internal hexagon for easy assembly...

...Note Delivery wheels GN 736 are used for adjustment processes with low torque. The coarse adjustment can be made via the rotating cylinder knob (finger grip), while the fine adjustment is done at the knurled ring. Execution Aluminum black anodized Cover Plastic, light gray Clamping collet / hex nut Brass Stainless steel threaded pin DIN 916 with internal hexagon and ring cutting Rotating cylinder knobs GN 599.5 Plastic, thermoplastic black, matte Shaft part stainless steel corrosion-resistant, 1.4305 Rotating cylinder knobs GN 599.5 RoHS...

...These guide rollers are designed for use on waves. Unlike the FRW/FRWE series, the rolling bearings are not mounted on a pin but on a shaft with internal threads. This allows the guide rollers to be attached from the wagon side using hexagon socket screws DIN 912 or DIN 7984. These series are also available in both concentric and eccentric designs, as well as in stainless steel (indicated by VA).

...Caps for screws with internal hexagon according to DIN 912 and 7991...

... Connectors and Elbows Gradual Ferrule (Brass) Hose Ferrules (Brass) Hose Ferrules (Metal) Internal Flared Hose Adapters Hydraulic Tube, Weld Union, Connector Hose Tee Connectors (Hosetail) Hose Fitting Caps (Brass) Male x Female Extended Hydraulic Adapter Metal Reduction Pipe Adapters R" - NPT" Hose Adapter Tipper Coupling Female Socket Sheet Iron Sleeves ...

...Pass screws similar to ISO 7379 for grid plates. Tighter tolerances, larger internal hexagon for frequent and precise positioning on hole grid plates. ISO:~ 7379 -B...

...Upright Angle Suitable for various module frame sizes Material: Aluminum Standard with support angle dimensions of 0.8 m, 1 m, or 1.5 m and a 30° angle Available with aluminum angle of 40 x 40 x 4 mm or 60 x 40 x 5 mm Custom designs available upon request Drill holes can be chosen freely upon request Delivery fully assembled with internal hexagon screw M8 x 20 and M8 locking nut Also available in individual parts...

...RFL Type Round Nuts with Internal Hexagon, Blind Hole Thread, and Decorative Flat Head for Visible Connections.

...Series: 0.600 Max Md: 6 to 250 Nm Deflection angle up to max. 45° Speed up to 5,000/min-1 Design: • Normal bore, bore with groove DIN 6885, internal square, internal hexagon • Quick-release coupling • With length compensation • Without length compensation • Precision shaft joints • Needle bearing Material: • Steel...

...In the field of eccentric turned parts, we have grown into specialists. We manufacture everything our customers desire, from small and prototype series to large-scale production. We enhance the complexity of eccentric turned parts with additional custom features such as: Positioned hexagon Hexagon parts with positioned eccentric Eccentrics on eccentric diameters Internal Torx, internal hexagon Markings in the form of notches, dots, surfaces...

... threads - UNC + UNF cylindrical threads - Trapezoidal threads - Special threads according to drawing Drives - Internal hexagon and internal Torx® - Internal multi-sided (e.g., internal 3, 4, or 5-sided), internal star - External multi-sided (milled) - Slotted, Phillips - Two or multi-hole drives Grinding / Polishing / Other Finishing Processes - External and internal grinding - Grooving and through-feed grinding - Mass finishing, tumbling, sandblasting - High-gloss polishing...

...Threaded pins with internal hexagon have been our core competence for decades.

...We produce screws for you with all types of heads and drives Slotted, Phillips, Abu-Star, Tri-Wing, One-Way, Combo-Cross, Combo-Abu-Star, Internal Hexagon, External Hexagon, Square, or customized to your specifications!

...These star and finger flanges serve as a foldable connecting element between the tedders in a hay rake. The internal hexagon machining requires extraordinary effort during heat treatment to maintain tolerances. We have a solution. Additionally, the parts are galvanized for corrosion protection.

...Fence screw made of V2A (stainless steel screw) M8 x 40 mm 5.5 mm internal hexagon Item number: PZB-004 Weight: 0.1 kg...

...Sealing plates are used whenever sealing is required on flat surfaces and internal or external threads (stud bolts) are available on the test specimen for fastening. Our sealing plates are equipped with non-removable screws or nuts. The drive of the screws/nuts can be manual via cross or star handles, or machine-assisted using TORX® or internal/external hexagon drives. Leverage our years of experience; we look forward to your inquiry.

...Threaded pins with internal hexagon ~DIN 913 (~DIN EN ISO 4026) Minimum order quantity: 1,000 pcs. per order and dimension Material: PA 6.6 Colour: natural...

...Straight screw connection, only internal hexagon We supply push-in fittings in various thread sizes and for different hose sizes, made from brass, stainless steel, aluminum, and plastic.

...The cross screw clamps the upper and lower parts of the SWA play-free and form-fitting through two wedge-shaped jaws. SWA Quick Change Adapter Flat design for applications with limited space: Operation via internal hexagon key Lightweight made of high-strength aluminum, anodized Also available in steel version, optionally nitrided No assembly for energy transmission makes sense...

... numbers in black, ascending in (D) or counterclockwise (S) Standard version Bushing steel, blued, black, hole with H7 blind hole, attached to the shaft using the supplied retaining screw with internal hexagon and cover cap UNI 5929-85. Display The gear ratio indicates how many spindle rotations (long red pointer) are required for one rotation of the smaller black pointer. Pendulum system with ball...

...We offer various screws and nuts in different sizes. We provide plow bolts and nuts made from hot-rolled, highly wear-resistant boron steel (hardened to 500HB), as well as hexagon screws according to DIN 931, countersunk screws with internal hexagon according to DIN 7991, and hexagonal nuts according to DIN 934. Package prices available.

...The base is dull chromed, hardened and lapped. The metal collet attachment guarantees reliable fixing of the dial gauge. An additional internal hexagon screw makes exchanging the dial gauge easier. Each of our mechanical dial depth gauges is equipped with the 10 mm long special contact point 573/21.

...Adjustable - Form B - Internal Thread Functionality of the Kassner Lever: Adjustable clamping levers are used when the clamping range is limited or a specific clamping position is required. The torque is transmitted through a 12-point gearing, as has been proven millions of times in the connection between hexagon screws and ring wrenches. Material: Lever made of zinc die-cast / Nut made of steel...

...Our HF hand grips are thoughtfully designed, featuring an application-oriented outer contour that forms a secure unit with the generators. To meet individual needs, we offer different models for all common generator connections. - Without button, ergonomically designed and made from biocompatible plastic. - Twist-proof due to internal hexagon. - For 2.4 mm and 4 mm electrodes. - Long lifespan due to robust construction and encapsulated contacts. - Variants with permanently connected cable or plug connection. - Tested according to relevant standards.

...Back wall screws with cross slot or internal hexagon (TX) hardened or unhardened...

... occupational safety. Head shape: Round Dimensions: H 1000 mm - D 219 mm or D 323 mm - S 6 mm SURFACE DESIGN: - Galvanized base layer - High mechanical resistance (scratch, abrasion, and impact resistance) through electrostatic powder coating with polyester resin yellow RAL 1023. (according to EU Directive No. 92/58) with a self-reflective element on the front. FIXING: (optional) Fixing of the base plate using special anchors with internal threaded sleeves M16 (4 pieces), designed for chemical anchors and hexagon screws.

...The screw is pressed with the foot plate in a way that it cannot be turned or lost, and can be screwed in at the threaded end using an internal hexagon SW 4.

...Whitworth pipe thread with internal hexagon - Chambered O-ring - Seals NBR - Material Ms nickel-plated - Temperature range -20 to +80 °C - Operating pressure range -0.95 to 16 bar - Swivelable, but not designed for continuous swivel movements Mounting: Screw-in Shape: Angle Application: Pneumatic Material: Made of nickel-plated brass Type: Push-in...

...Single and series production in aluminum, stainless steel, steel, and plastics • Powered tools enable the production of finished parts: o turned o drilled o milled o notched o internal hexagon • Bar loaders help save costs through multi-machine operation. • Twin-spindle machines with multiple axes and rotating tools increase positional tolerances.