internal hexagon

...This Widmann WM-88SS: 88-Piece 1/2′′ Bit Socket Sets: Spline, Internal Hexagon, T-Star Set is a comprehensive set of the most commonly used bit sockets. To make these bits, we use premium S2 steel that has been tempered using our proprietary heat treatment process. They are exceptionally durable and strong, can withstand high torque, and do not twist, protecting both the bit and the fastener...

...Sheet metal screws with countersunk head and internal hexagon, Form C (with tip) – C 3.5 x 9.5 T-10 A 2 7983 Drive Internal Hexagon: T-10 Diameter: 3.5 Length: 9.5 Standard: DIN 7983 – ISO 14587 Material Group: Stainless Steel...

...Spring-loaded pressure pieces are used for locking as well as for push and pull pins. Execution: Steel strength class 10.9 (blackened) or stainless steel; ball hardened, bright. Spring-loaded pressure pieces with pins (with internal hexagon) Execution: Steel strength class 10.9 (blackened) or stainless steel; ball hardened, bright. Spring-loaded pressure pieces are used for locking as well as for push and pull pins. The slot on the pressure pin side is used for screwing into blind holes. Pressure pieces with thread locking available upon request.

...Standard DIN 906, Product Category Closure Screws, Item Description, Closure Screws with Internal Hexagon, Shape, Material/Strength, Finish, Diameter NPT1/16, Length (mm) 0...

...• protects the internal hexagon (e.g., DIN 912) from corrosion and contamination • two versions available. Also suitable for countersunk screw heads • reusable multiple times • easy installation through patented fastening If you want to cover the entire exposed screw head, use our clamp caps type SW. Call us. We will help you choose a suitable protective cap. Technical Information The...

...The lightweight alternative for small and medium manhole sizes. Cover and frame made of polyurethane, reinforced with fiberglass. Load class D125 according to DIN EN 124. Slip-resistant surface. Locking by screws with internal hexagon SW6. Without level adjustment.

...- Internal hexagon for insertion and adjustment. - Corrosion-resistant stainless steel housing. - Optimally protected against demagnetization. Product features to your advantage: - Counterable for locking. - Waterproof. - Temperature resistant depending on the variant. - Neodymium up to 120°C. Samarium up to 180°C.

...ISO 7380-1 with flat round head and internal hexagon 'ULS'...

...Hexagon socket screws according to standard and drawing Thread sizes from M 1.6 to M 42 Countersunk screw with hexagon socket according to standard and drawing Thread sizes from M 1.6 to M 30 Hexagon head screws according to standard and drawing Thread sizes from M 1.6 to M 42 Deviating sizes available upon request.

...• Practical rotating holder for easy retrieval and storage of the pin keys • For internal hexagon screws • Face surface machined and edges beveled • Nickel-plated • Made of chrome-vanadium steel Size of hexagon pin in millimeters: 1.5 - 10...

...Hexagon Socket Head Cap Screw Form C (V Toles TCHC) Stainless Steel A2 Model: 62415...

...Round Shackle with Internal Hexagon - Shackle, Snap Shackle Marinetech Article Number: 8482405 EAN Code: 4022697165745 Weight per 100 pcs: 1.25 kg Packaging Unit: 10 pcs Material Type: Stainless Steel A4 Internal Width (iB): 10 Internal Length (iL): 19 Material Diameter (ø): 5 Breaking Load in KG: 1000 Material: Stainless Steel A4 - AISI 316...

...MBX magnetic clamping blocks have opposite clamping sides that are activated when actuated. They are designed to clamp workpieces on steel surfaces such as machine or assembly tables. Several MBX can also be connected together via the internal hexagon of the indexing shaft to clamp longer or larger workpieces.

...{"Features":["Optical expansion control replaces torque wrench","Holds in almost all building materials","Uniform expansion through internal cone","High holding values (metallic power transmission)"],"Description & Application Area":["4-part expansion body made of metal","Large surface washer Ø 24 mm","Hexagon screw strength class 8.8, galvanically galvanized with plastic sleeve"]}...

...Hexagon socket bolt, DIN-EN-ISO 4762 (old DIN 912 standard) Galvanized, strength class 8.8 Material: C1035 steel Coating: electroplating Thread: metric, normal, accuracy class - medium (6g) A bolt with a cylindrical head and a turnkey internal hexagon, complete and incomplete metric: thread. Material:C1035 steel Coating:electroplating...

...With our special screws, you can be confident even in unusual fastening situations. Turned special screws or forged blanks that are processed into special screws belong to our special screw program. • Hexagon screws in the stronger and longer range ISO 4014, ISO 4017, ISO 8676, DIN 931, DIN 933, DIN 961 • Internal hexagon screws according to drawing ISO 4762 • Special screws according to drawing...

...Self-forming screw, Torx & self-tapping screw, internal hexagon Connection of two aluminum profiles; no threading required for assembly; the special shape of the screw head and the self-forming thread create a conductive connection between the profiles. Material: Steel, galvanized Self-forming countersunk screw, with internal hexagon For all fastenings on the end face of the profile; removable...

...This grip variant allows for the transmission of very high torque. Variants: Hexagon TORX® Socket wrench with internal hexagon Country of origin: Germany...

... steel 1.4305. Spring made of stainless steel 1.4310. CHC screw made of steel or stainless steel A 2. Finish: Locking element in blackened steel or shiny stainless steel. Shiny spring. CHC screw made of steel class 8.8, blackened or in stainless steel A 2-70, shiny. Ordering notes: For each of the internal tooth locking elements of shape A and B, 2 M3x8 or M5x10 hexagon socket CHC screws are included. For each of the external tooth locking elements (shapes E-H), a stainless steel spring is included. Reference: 07820...

...PLACOLOCK® rotary latch with a choice of insert (triangular, square, slotted, with internal hexagon). Vibration-resistant design, delivered with unmounted tongue, universal - opens and closes clockwise or counterclockwise. Compact size for thin walls. STANDARD MATERIAL Tongue and screw: galvanized steel Housing: zinc die-cast, chrome-plated or black textured powder-coated Insert: zinc die-cast, chrome-plated or black textured powder-coated Nut: brass, electro-galvanized Washer: stainless steel 304 STANDARD IP 54 IP 65 - upon special request DIN EN 61373...

...Safety Valve Insert Material: Stainless Steel 316L External Thread: 5/16”-20UNF Internal Hexagon Diameter: 5.5 +0/-0.05 mm Length: 51 +/- 0.1 mm...

...Cylinder screws with internal hexagon according to DIN 912 made of stainless steel A2 In the product range of schrauben-seimatec, you will also find cylinder screws DIN 912 made of stainless steel A2 with internal hexagon drive. These are the perfect solution for your requirements. These screws are manufactured according to the strict German DIN standards and offer a variety of advantages for a wide range of applications.

...Screw-in fittings with internal hexagon Article number: 30.201 Operating temperature [°C]: 0 - 60 Pressure range [bar]: -0.95 - 15...

...Maximum Machining Performance MAXXOS T211 is a clamping mandrel with a hexagonal pyramid shape instead of a round cone – ideally suited for demanding and process-safe manufacturing. The hexagonal clamping pyramid allows for maximum transmission forces to be achieved. Additionally, the segment clamping sleeve with the internal hexagon fits perfectly in every clamping position on the clamping...

...with ball and internal hexagon • automated steel, blued • ball hardened Form KM: Standard spring force (M3 - M24) Form KSM: reinforced spring force (M4 - M24) Max. operating temperature: 150° Thread locking and special designs available upon request...

...ISO 7380 Half-round head screws with internal hexagon A2...

...We offer hexagon socket screws according to DIN 912 from M4 to M8 made of steel in all strength grades. For the surfaces, we adhere to your customer requirements. We collaborate with certified service providers in the area who can apply any surface treatment to our screws. Of course, these screws can also be manufactured with washers, known as combination screws. Hexagon socket screws are also available with a DUO drive, meaning: with both internal and external hexagon on the same screw. This special production is possible with us starting from a batch of 10,000 pieces.

...These parts are manufactured by machining or pressing (cold forming) depending on the quantity. Versions: - According to drawing - According to various standards - Hexagon, flat, round, and half-round head screws Production types: - Pressed - Machined Diameter range: - M1 – M64 Drives: - Internal hexagon, multi-tooth Thread ends: - Domed, lens-shaped, pointed, radius, blunt Materials: - Automatic steels, C steels, heat-treated steels, grades 4.8 – 14.9 - Stainless steels in grades A1 – A5 - Brass, aluminum, copper, nickel silver, titanium...

...Hexagon socket with pin DIN 915 Material: STAINLESS STEEL A2 V2A...

... cone without internal thread, and a hexagon screw. Alternative: Version for embedding in concrete.Design - Powder coating in standard RAL colors or DB 703.The basic equipment of ABES Poller 071 with 3p technology includes: – Post, aluminum casting, powder-coated according to RAL or DB 703 iron mica – Dimensions (H above ground x Ø in mm): 937 x 90 – Ground sleeve 300 mm (000.001), galvanized...