martensitic

HQW Precision GmbH is headquartered and has its production facilities in Kürnach, near Würzburg, Germany. We specialize in the design and manufacture of high-end rolling bearings and assemblies tailored to the requirements and needs of our customers, delivered for a wide range of critical and demanding applications. The industries we serve include aerospace, high-speed machine tool spindles, robo...

... of forging into forging stainless steels, as these steels are increasingly present in automotive engines as well as in other segments of the use of forged parts. The advantage of stainless steels is that they are corrosion-resistant, and do not require additional surface protection. Through the hot forging process, we are able to transform both ferritic, martensitic and austenitic stainless steels. ...

...Precision Turning Parts 1) Mold design and construction 2) Cast and machine complete including heat treatment, NDT testing and coatings,turning. 3) Materials included but not limited to: austenitic, martensitic and precipitation hardening stainless steel alloy, tool, high strength steels, aluminum, copper, magnesium and cobalt-based alloy 4) Tolerance: o linear+/-0.1mm per 20mm 5...

...SPIROL's high-load spiral elastic pins are available in diameters ranging from 1.5 mm (.062") to 20 mm (.750"). Standard materials include high-carbon steel, nickel stainless steel (austenitic) 302/304, and chrome stainless steel (martensitic) 420. For diameters over 12 mm (.500"), they are available in 6150 alloy steel. SPIROL invented the spiral elastic pin in 1948. Spiral pins are available...

... state-of-the-art manufacturing facilities and current know-how. In our production halls, we manufacture equipment on an area of approximately 13,000 m², with diameters of up to 8 m and a piece weight of 100 t. The maximum crane height is 23 m. Complete systems can be pre-assembled and factory-tested. This reduces assembly and commissioning times for you, saving time and costs. Materials · austenitic, fully austenitic, ferritic, and martensitic stainless steels (e.g., 1.4000, 1.4301, 1.4541, 1.4571, 1.4404, 1.4529, 1.4539, etc.) · heat-resistant steels (e.g., 1.4828, 1.4878, etc.) ·...

...Large range of forging billets for the following markets: Oil and gas: flanges, valve bodies, valve balls, shells, B.O.P., gate bodies, pipes, and wind energy production. Available in the following categories: carburizing steel, heat-treated steel, creep-resistant steel, martensitic stainless steel, bearing steel, tool steel, alloy steel, and nitriding steel.

...Pressvit produces screws in various materials: stainless steels, carbon steels, and non-ferrous materials. Stainless steels: • Austenitic: 304 (1.4301) – 304L (1.4307) – 305 (1.4303) – 304Cu (1.4567) – 316L (1.4404) – 316Cu (1.4578) – 316Ti (1.4571) • Martensitic: 410 (1.4006) • Ferritic: 430 (1.4016) – 434 (1.4113) • Duplex: 1.4462 / 1.4162 / 1.4362 • Precipitation hardening: 630 (1.45242...

...In addition to a variety of partially low-alloy tool steels (cold-work, hot-work, and high-speed steels), we have many RSH steels in our portfolio. Starting with low-alloy corrosion-resistant martensitic and soft martensitic alloys, through corrosion-resistant duplex alloys (lean, standard, and super duplex grades), to highly alloyed fully austenitic alloys based on Fe and Ni. These highly...

...We produce precision machined components from 2mm to 52 mm diameter. Our customers are from automotive, electro, white goods, hydraulic, pneumatic and machine building industries. Using up to date production and quality equipment we can offer machining of parts from different raw materials like: Stainless steel (austenitic, ferritic, martensitic) Aluminum (bars or casted parts) Carbon and hardened steel (ETG, forged steel, steel for heat treatment) Brass Products for automotive industry. sensor housings screws pins pivot pins shafts connectors bolts washers bushes nuts...

...13-8 Mo VIM-VAR steel is a precipitation hardening martensitic stainless steel/ It offers excellent strength, fracture toughness and transverse mechanical properties. The material is resistant to stress, corrosion cracking and has the high strength characteristics common to the family of precipitation hardening steels. The alloy is double vacuum remelted (VIM-VAR) which assures low gas content, improved homogeneity and superior cleanliness...

... excellent characteristics of damping and super elasticity. Nickel Titanium (also known as Nitinol or NiTi) is in the unique class of shape memory alloys. A thermoelastic martensitic phase transformation in the material is responsible for its extraordinary properties. Diameter:0.25-6mm...

...HPM® 455 is a precipitation heat treatable martensitic Stainless Steel. The composition provides a good combination of corrosion resistance and heat treated strength favorable for fatigue applications. The material is well suited for demanding spring devices The alloy has reasonably good forming characteristics in the annealed temper considering that it has a hardness of RC30. A significant...

...<Product Description> SUS420 is a general purpose edium carbon straight chromium high hardenability martensitic stainless steel with good strangth and fairly good corrosion resistance. this grade offeres hardened & tempered martensitic stainless steel 420J1.420J2 440A grades,for custom stainless steel to meet your specific application requirments.high preformance stainless steel strip. <Our...

...CHEMICAL COMPOSITION (ANALYSIS OF MARTENSITIC AND AGE-HARDENED STAINLESS STEELS, FERROUS STAINLESS STEELS, AUSTENITIC STAINLESS STEELS), REFERENCE TO STANDARD EN 10088-3...

Stanford Advanced Materials supplies machined products of pure elements, alloys, compounds &amp; polymers. They&#39;re customizable and in many shapes for broad applications.

... first to manufacture a high-temperature nozzle of up to 420°C. The F430 comes equipped with a dual extruder; the left hotend at 260°C is capable of printing with PLA, ABS, PC, Nylon, carbon fiber, flexible materials, etc. The right hotend, which reaches up to 420°C, is made of martensitic steel, capable of printing high-performance materials such as PEEK, ULTEM, etc. The dual hotend is replaceable...

...Heat treatment at a high level Quenching (martensitic) is a hardening process followed by tempering at high temperatures. This results in a fine-grained structure with high strength and toughness. Steels with a carbon content of 0.22 – 0.60%C are used for this purpose. They are partially alloyed. For hardening, quenching steels are heated to about 820 – 900 °C and then quenched in oil. Tempering is done at temperatures of about 530 – 670 °C. Although this reduces hardness, it significantly increases strength.

...Referring to the ASTM B912 standard, electrolytic polishing or electropolishing optimizes the passive layer of stainless steel by preferentially bringing the chrome of the stainless steel to the surface during the electrolysis process. This process also improves the roughness of your fabrications and gives them a shiny appearance. Aupus 912 A Electrolyte for polishing austenitic stainless steels Reference: ASTM B912 Aupus 912 AM Electrolyte for polishing austenitic and martensitic stainless steels Reference: ASTM B912 These products meet the standards of the following sectors: industrial, medical.

...Reduction fittings, hollow cylinders, end caps, spherical bottoms, Y-pieces, hose pieces, angled fittings, rings, special forged parts NON-CORROSIVE STEELS ACCORDING TO DIN 10088-1 • Ferritic non-corrosive steels • Martensitic and precipitation-hardening non-corrosive steels • Austenitic non-corrosive steels • Austenitic-ferritic non-corrosive steels SPECIAL MATERIALS • Corrosion-resistant materials • Heat-resistant materials • High-temperature resistant materials • Heating conductor and resistance materials • Expansion and glass melting materials • Soft magnetic materials...

...Stainless steel is a material used in many different sectors. From construction to kitchens and white goods, the use of stainless steel sheets is possible. Depending on the area where the material will be used, the products can vary in size, dimensions, and types. Stainless steel is classified into a total of 5 different categories: Martensitic, Ferritic, Austenitic, Duplex, and Precipitation...

...EN GJS 800 2 hardened & tempered, EN GJS 900 2 as cast & normalized, EN GJS 900 2 hardened & tempered EN 1562 Malleable : Blackheart, Pearlitic, Whiteheart ALLOY CAST IRONS Austenitic :Flake Graphite , Nodular Graphite High Silicon White Cast Iron :High Chromium, Low alloy, Nickel-Chromium CARBON STEELS Low Carbon Steels Medium and High Carbon Steels ALLOY STEELS High, Medium and Low Alloy Steels STAINLESS STEELS Ferritic, Martensitic, Austenitic, Duplex, Precipitation Hardened...

...We manufacture rough or fully machined body and flange for 3 pieces ball valves in : • Austenitic stainless steel Alloys (CF8M, CF3M…) • Aluminium-Bronze (UNS C95500…) • Duplex and Super Duplex (CD4MCu, CD3MN…) • Nickel-based and high-alloys (CW-6MC, CU5MCuC, M-35-1 CW-12MW…) • Martensitic alloys (CA15, CA6NM…) • Other materials on request...

...Stainless steels: - Austenitic - Ferritic - Martensitic - Duplex Special steels: - Nickel alloys - Titanium...

... surface. Although stainless steels can passivate themselves in ambient air, additional passivation with diluted nitric acid proves beneficial under critical corrosion stress: Due to the oxidizing effect of nitric acid, the formation of the passive layer occurs more quickly and densely. We pickle all types of austenitic, ferritic, and martensitic stainless steel.

...Almost all stainless steels, whether austenitic or martensitic, can be deep drawn in subsequent processing. Sheet thicknesses of 0.1 - 3.0 mm are possible. What challenges do you face? For many products in the metal goods sector, stamping and forming technology offers an extremely efficient manufacturing option. We typically produce formed components from coils with a thickness of 0.05 to 3 mm, processing various materials such as deep-drawing steel, stainless steel, aluminum, non-ferrous metals, or titanium.

... Hardness of new grain +/- 640 HV (56 HRC) Grain shape: angular Melting point: approx. 1535 °C Specific weight: approx. 7.8 g/cm3 Bulk density (depending on grain size): approx. 3.0 – 4.6 g/cm3 Microstructure: martensitic C 2.80 - 3.20 % Si 1.00 - 1.50 % Mn 0.35 - 0.90 % P 0.10 - 0.20 % S 0.07 - 0.12 % Fe remainder Designation: G55 Main grain range (mm): 1.4-2.0 Art. No.: 6.1213.08.0...

...Under controlled furnace atmosphere Max. usable dimensions Ø 5,000 mm x 5,000 mm When steel is rapidly cooled from the austenite phase (i.e., from temperatures above 723 °C), a martensitic structure is formed, characterized by high hardness. Through tempering, the steel regains a certain toughness. During quenching, tempering occurs at high temperatures of up to 700 °C to achieve optimal results for all mechanical properties. This is particularly useful for workpieces that are subjected to dynamic loads and require high toughness.

... station, washing machine with salt recovery, chamber tempering furnace, and charging cart. The heat treatment goods are transported on special transport racks using the rail-guided charging cart, either via manual control or in automatic mode from station to station. Batches weighing up to 1200 kg can be heat treated. The salt quenching bath with air or water cooling is designed for both bainitic and martensitic hardening. Possible heat treatment processes: - Annealing - Tempering - Hardening - Quenching - Carburizing...

...Special processes for stainless steels. Edge hardening achieves a high surface hardness, a tough core, and excellent corrosion resistance. HARD-INOX-P (also known as SolNit) creates a hard and corrosion-resistant edge zone in ferritic (e.g., 1.4016, 1.4104) and martensitic (e.g., 1.4021, 1.4112) stainless steels. The surface hardness reaches 550 to 750 HV with a hardening depth of 0.1 to 1.0 mm.

...For direct installation in hardening tanks, we manufacture circulation units, as well as cooling and circulation units for water and polymer quenching media. For specialized applications in the field of salt bath hardening, we supply circulation units and air-cooled cooling and circulation units for martensitic and bainitic baths.