Results for

Manufacturer Producer - Mould cleaning

43 Companies

20 Products

HARTGE SCHALLREINIGUNG

Germany

For over 16 years, the name Hartge has stood for professional support in relation to all aspects of acoustic cleaning – from detailed analysis and consultation through to professional realisation of individual measures. In doing so, we combine precise handcraft with state-of-the-art technology, and fulfil the highest quality requirements. Small parts can be set to vibrate or kept in motion by sound waves. Deposits of ash and dust are consequently prevented. In contrast to other methods, acoustic cleaning keeps clean surfaces clean. As acoustic sound waves expand spherically, they can reach even the rear sides of complex structures by reﬂection. Acoustic cleaners are used in the following branches: Biomass and coal power stations, waste-fuelled power stations, the paper and wood industry, the chemical industry, food production, etc. These plant sections are favoured: Economisers, air preheaters, silos, hoppers, ﬁlter systems
JAMONES PESÓN

Spain

We are manufacturers of hams and cured meats in the province of Teruel, where we have been making artisan produce since we began, sometime around the year 1898. We follow a strict process for preparing our products, with final quality being our ultimate goal, resulting in a product of great distinction. We achieve this through strict selection of ingredients and exacting preparation processes where all our traditional expertise in making and handling products is combined with up-to-the-minute technology.

All the products for "mould cleaning"

Boneless Mould clean

Boneless Mould clean

Website See all products
ULTRA SYSTEM S.A.

Switzerland

A GOOD CLEANING GRANULATE CONTRIBUTES TO BETTER QUALITY. Colour changes, material changes, black patches, streaks. Every plastics processor faces this problem on a daily basis. With Ultra Plast products, up to 90% cost savings can be achieved during colour and material changes. When it was founded, the company's focus was on research and development in the field of new products designed to clean injection moulding machines, extruders, blow-mould and film-blowing systems: the use of plastics and additives with new chemical formulae on the one hand, and the demand for specific products from the plastics processing industry on the other require constant updating. Today, Ultra Plast is a globally recognised brand of cleaning granulates, and the Ultra System company is a competent and reliable supplier that helps solve all problems that might arise when cleaning machines. We provide specific products according to each sector of industry: packaging industry, medical/pharmaceutical and cosmetics industries, automotive and electrical/household appliances industries.

Website See all products
TECHNOTRANS SOLUTIONS GMBH

Germany

The fact that the gwk Gesellschaft Wärme Kältetechnik mbH company enjoys such a great reputation as a top expert and innovative specialist in high-quality temperature control and cooling technology is based on an abundance of experience that stretches back more than five decades. Anyone in need of well-thought-out high-tech products ranging from cooling plants via temperature control systems to water treatment solutions will find gwk to be a system provider that manages the entire thermal process, generating individually tailored designs and also delivering engineering and all the necessary components. Also in the area of close-to-cavity temperature control for mould inserts and mould cleaning, gwk offers its customers intensive and individual support. At present over 400 employees are engaged in producing complete process solutions for customers from the plastics, metal processing, food and chemicals industry on every continent. The technotrans group of companies focuses successfully on applications involving liquid technology as its core competence. With 21 sites and about 1, 250 employees, it has a presence in all major markets worldwide. For many years, technotrans has opened up new areas of application based on its core competences of cooling, temperature control, filtration as well as measuring and dosing technology. The strategy aims at a sustainable, result-oriented development.

Website See all products
PROFILE DEFLASHING COMPOUNDS LTD (DIEBLAST)

United Kingdom

Manufacturers of Deflashing and Shotblast media for the Plastic & Rubber Industries.Marketed under the brand name of DIEBLAST SYSTEMS, Profile Deflashing Compounds Ltd manufactures high performance blast media for a wide range of applications including cryogenic and ambient deflashing, mould cleaning and paint stripping.From the cleaning / deflashing of delicate substrates such as micro chips in the electronics industry to the cryogenic deflashing of precision mouldings, DIEBLAST SYSTEMS has a product to suit a diverse range of applications.

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

FELIS PRODUKTI D.O.O

Croatia

We are the Foundry specialized in manufacturing and exporting carbon, alloy and manganese steel castings. Our castings for machine building, shipbuilding, railroad equipment, processing industry, as well as for energy sector, cement plants and quarries are ranging from 1 kg to 12.000 kgs in weight. Production facilities, such as: Pattern shop, Melting furnaces, Hand & machine molding bay, Cleaning room, Heat treatment equipment, Machining shop, alongside with Quality control department, enable us to provide full service in supplying high quality castings. Felis Produkti’s strategy includes also the following QC and QA aspects: - Quality management system acc. to ISO 9001: 2008. Standard - Certified testing procedures (chemical analysis; mechanical testing; non-destructive testing). Situated in Industrial area of Sisak, the city about one hour of drive away from Croatian Capital - Zagreb, Felis Produkti holds the position of leading producer of steel castings in Republic of Croatia.
PROGRESS SILICONES

France

PROGRESS SILICONES has been specialised in the manufacture of silicone parts and other elastomers for industry and the medical sector since 1985. PROGRESS SILICONES designs, manufactures and sells silicone parts for the most demanding industries. Sectors, such as: the food industry, nuclear power, cosmetics, aeronautics, pharmaceuticals and biomedical. From single parts to mass production, we create all types of moulded parts, overmoulding, extrusion, co-extrusion, manufacturing and cutting. All our production can be associated with specific marking and packing operations, according to your specifications. We are equipped with 2 Clean Rooms covering 550 m2 classed ISO 7 and ISO 8, adapted to the manufacture of medical and pharmaceutical products. Our quality management system is ISO 9001 and ISO 13485 certified.

All the products for "mould cleaning"

A TEAM AT YOUR SERVICE

Website See all products
CHEM-TREND (DEUTSCHLAND) GMBH

Germany

Chem-Trend is the most proven partner in the world for release agents, purging compounds, and other related process chemical specialties. Using a customer-centric approach combined with deep research and development, Chem-Trend is dedicated to providing expertise and innovative solutions to improve product quality, production efficiency, waste reduction, and sustainability for its customers now and well into the future. Chem-Trend offers a globally integrated network of experienced, knowledgeable, and insightful production and technical experts, with leading-edge research and development facilities supporting myriad industries and needs. Chem-Trend serves customers through offices in North America, South America, Asia, and Europe and is part of the Freudenberg Group. We are specialised on the development, manufacturing and marketing of: Mould Release Agents Purge Compounds Mould Maintenance Products (Cleaners and Degreasers, Lubricantes, Mould Protectants, Anti-Corrosion Agents) Hydraulic Fluids Plunger Lubricants Moulding of composites Die casting Friction Moulding of Polyurethane (PU Foam) Moulding of Rubber Moulding of Thermoplastics Tyre Paints (Release Agents) for Tyre Manufacturing Tyre Paints (Release Agents) for Tyre Retreading Mould Maintenance Release Agents for Wood-Composites

Website
IMOLDING DEUTSCHLAND GMBH

Germany

iMed is an expert supplier of technical precision parts and assemblies made from plastic in small-, medium- and large-scale series for use in key industries. As a system supplier, iMed can look back on more than a decade of experience. This experience is not limited to a single branch of industry. It's not just the use of state-of-the-art technology that has ensured satisfied, long-standing customers and their trust in the production quality of iMed. Outstanding employees accompany each product from the first development step all the way through to series production. iMed values supporting the company's own new recruits as well as offering continuous and further training, and intensive courses. Our in-house experts therefore work with the same professionalism that is displayed by the customer's experts.

Website
GDI CORPORATION

Bulgaria

GDI offers customised manufacturing services in various industries, ranging from producing a specific part to opening a new facility with dedicated teams and machinery. Our goal is to deliver a high-quality product at an economical cost for long term partnership. All GDI business ventures are strictly confidential. GDI Corporation consists of subsidiaries that focus on specific industries. GDI is the largest ISBM bottle producer in Bulgaria. Injection Machines from 50t-450t. 100% Made in Europe. Service include: -Manufacturing within a Clean room, Class 8 -Manufacturing of plastic components, Injection Molding -Manufacturing of plastic bottles, Injection Stretch Blow Molding/Blow Molding -Printing on plastic components/bottles -Blister Packaging of components -Ultrasonic Welding of plastic components -Assembly of semi-finished or finished products. -Others upon request We work with a variety of hard polymers, soft elastomers, and silicone. GDI has several trucks that deliver partner products in Europe, a total of 28 vehicles. Certifications: ISO 9001, ISO 13485 (Medical), SMETA 2 Pillar & Lego SQP. Upon request can comply with additional standards. GDI provide, solutions for: -Production Tooling -Logistics Optimization -Product Properties & Design -3D Printed Prototyping in house & QC testing -Graphical Design -Product Packaging -Warehousing and direct shipment -Others upon request Contact us for a quotation!

Website See all products

OR.P. STAMPI SRL

Italy

OR.P. Stampi started trading in 1980 and manufactures compression, injection and transfer moulds for rubber gaskets and technical articles, O-rings, chassis, washers, beads, collars, membranes and covers on automatic machines to design, machine and test the manufactured moulds.

All the products for "mould cleaning"

CHROME PLATING – HARD SURFACE

STEEL

Website See all products
SUPREMA DRY CLEANING 100% MADE IN ITALY

Italy

wish introduce myself as export Manager of dry cleaning machines manufacturer company Bergparma srl, Italy Our reputation is leading manufacture in Italy of high quality dry cleaning & laundry machinery, manufacturing machine with trade mark of SUPREMA, LINDUS, BERGPARMA and UNIVERSAL since more than 70 years The facilities insist on an area over 10.000 sq. meter fully equipped in order to guarantee a 100% MADE IN ITALY production During the years the production capacity increased till ca 100 machines per months, sold especially on U.S.A market, under private labels as Forenta, Stainer Atlantic, Aerotech, Hoffmann Our company export already worldwide in more than 60 countries, and we can support you for transportation/commissioning too The range of production start from a small 8 kg load capacity till 90 kg loading drum for industry, even in compact than in modular line, SLIM or LARGE version, and fully comply with the strongest world Standards requirements Can supply machines operate with many different kind of solvents beside the Perchlorethylene; any kind of Hydrocarbons, all Silicone family solvents & modified Alcohol to satisfy line for tannery and furs/leather production or textile and knitting manufacture, as well laundry, disinfections, hospitals, hotels, washing centers and coin-op, shoes and metal cleaning, industrial work clothes, gloves and technical cloths The line also include finishing machinery for a complete turn-key project for laundry and/or dry cleaning

All the products for "mould cleaning"

SOLE CLEANING

See all products

Product recommendations

Germany

WIWOX® 410 Cleaning chemical Alkaline cleaner

Germany

Spain

Italy

See more products

KNABEPOLYTEC GMBH

Germany

Knabepolytec GmbH - cleaning granulates for the plastics industry . Knabepolytec has specialised in the development and sale of cleaning granulates for the plastics industry for over 20 years. We provide the appropriate cleaning products for your injection moulding machines, blow-moulding machines, extrusion systems and hot runners. Knabepolytec offers you the most effective products on the market for removing burns and paint deposits from screws and extruders. Our products are suitable for articles in contact with food and comply with the REACH specifications. Using our products reduces your material and colour changing times and the associated energy, machine and personnel costs by up to 90%. In addition, your recycling costs are also reduced while quality problems and costly complains are avoided. Our products not only have a positive impact on your profitability and competitiveness, but also make a significant contribution to reducing your carbon footprint. Our service includes training your staff in order to ensure that our products are put to the most effective use. In addition to our universal products, we also provide customer-specific solutions. Do you have special process requirements and need a specific solution? Then we will work with you to develop them.

Website
HTP EUROPE

Belgium

HTP Europe has since 1954 been specialised in plastic injection, injection blowing, the manufacture of matrices, moulds and tools. With over 60 years experience we have become a leader in this field. Our business is focussed on the injection of technical parts, injection blowing (IBM and ISBM) of bottles made form plastic and composite materials in clean environments. We carry out overmoulding of inserts which can be metal, textile or flexible TPE/TPU/SEBS type materials, and assemblies of plastic parts thanks to welding (ultrasound, mirror and vibration) or by bonding. We transform all types of thermoplastics which can be loaded with glass or carbon fibres. We are active in various fields, such as medical, pharmaceutical, food, aeronautics, electricity and safety. Since quality management is one of the keys to our success, we are proud to be ISO 9001 and EN 9100 certified.

Website
AYTEK PLASTIC MOLD AND MACHINE FOREIGN TRADE LTD

Turkey

Established in 1975, Aytek Plastik stands as a premier Turkish manufacturer specializing in plastic caps, cap molds, bottle molds, and packaging solutions. With state-of-the-art injection molding machines, including high-caliber European models, we seamlessly integrate mold manufacturing and cap production, catering to diverse sectors like cosmetics, shampoo, detergent, household cleaning, and food. Trusted by well-established companies, our comprehensive solutions prioritize quality production, customer satisfaction, and innovation, ensuring exceptional service worldwide. We emphasize timely delivery, competitive prices, and excellent customer service, driving continuous development of innovative solutions. At Aytek Plastik, we are committed to upholding the highest standards of quality and reliability. Adhering to strict ISO 9001: 2015 standards, we ensure that every product leaving our facility meets rigorous quality control measures. This dedication to excellence has enabled us to build enduring relationships with our clients, delivering products that are not only reliable and durable but also consistently exceed expectations. In addition to our commitment to quality, Aytek Plastik is deeply committed to environmental sustainability. Contact us today for more information on how Aytek Plastik can meet your plastic packaging needs while upholding the highest standards of quality, reliability, and sustainability.

All the products for "mould cleaning"

KP-00805

Website See all products
MATCO

Belgium

Trading & distribution of chemicals for the foods, detergents, adhesives, paints, textile & plastic industry. Product details available in catalogue comprising triacetin, citric acid, phosphonates, GLDA, TAED, STPP... Distribution of post-consumer PVB for the injection, extrusion & molding industry in PP, PE, PVC for plastic, household, textile and automotive applications. Recycling off-spec (e.g. TiO2), 2nd grade & damaged chemicals or raw materials. Production waste/side-streams (liquids & solids) are treated for re-usable applications. We aim to prevent waste and maximize the re-use of raw materials. Compounding, production and blending of custom-made chemicals for carpet and artificial grass backing. EVA based compounds with low VOC content. Management of hazardous and non-hazardous waste, industrial cleaning. *Matco is an ADR approved company with warehousing services & administration support. Sales & trading activities in Europe, CEE, Middle-East, India and China.

Website See all products
ENDURAMAXX

United Kingdom

We are the UK’s leading manufacturer of polyethylene products and utilise the very latest in rotational moulding and UV stabilisation technologies. We construct all of our tanks, bowsers and sprayers using the very highest grade materials ensuring exceptional quality and durability. Who We Are Enduramaxx has designed and manufactured outstanding Water & Chemical tanks, bowsers and sprayers metering solutions for the Cleaning and Hygiene, Water Treatment, Agriculture, Commercial & Industrial Processes markets and now delivers these throughout the UK. Enduramaxx is unique amongst its principal competitors through its scale and breadth of portfolio covering multiple business sectors and many different and varied applications and continues to deliver its way of doing business with quality products and first class service. Our Mission Enduramaxx offers a professional liquid storage solution buying experience that has customer satisfaction as the first priority. Our high-quality products are designed to meet customer needs and we are driven by integrity and loyalty in all we do. We have an open, transparent culture where we always treat others with kindness and compassion aiming to exceed expectations.

See all products
TURKKIM CHEMISTRY PHARMACEUTICAL HEALTH PRODUCTS

Turkey

Our company is located in Istanbul, Turkey. We produce cleaning products(hand soaps, detergents, surface cleaners, disinfectants, multi-usage wipes), protective equipment(medical masks), health products as well as other products. We have machine equipment and professional employees who can quickly produce solutions by preparing the products you require in our R&D and laboratory. Our Chemistry Laboratory's authority is one of Turkey's leading chemistry professor instructors, and our team is made up of skilled experts in their respective fields. Turkkim also plays an active role in contract manufacturing and private label production. Turkkim can produce the exterior packaging by making/designing a special mold for you with our blowing molding machines and injection molding machines. With your request, we can produce contract products for your brand.

See all products
T.S.T. SRL

Italy

T.S.T. S.r.l. / Plastics Technologies is a structured organization with the know-how to provide "tailor-made" solutions for the customer: - Product engineering and industrialization -> Tool desig & co-design; Stress and mold flow analysis; Reverse Engineering; Production of additives. -Design of the mold and related equipment; - Rapid prototyping and metal replacement; -Construction of molds; -Tests mold and molding of thermoplastic articles; -Production in ISO 7 clean room and gray room. T.S.T. offers high-tech customized products using 1-K / 2-K and 3-K molding techniques. The company is equipped with: -13 mono-injection presses from 25 to 250 Tons, -10 bi-injection presses from 90 to 175 Tons. -3 full eletrics presses from 28 to 130 Tons. -4 assembly and testing lines. To ensure a quality product, T.S.T. is certified: UNI EN ISO 9001: 2015, IATF 16949: 2016 and UNI EN ISO 13485: 2016. It operates in the sectors: 1-Automotive: Seat belt assemblies, buckles and pretensioners, Solar and fuel sensors, Cooling pump components, Control panel and door panel escutcheons and actuators, Transmission and flow control components, others 2-Medical: Manufacture of components and groups for fluid filtration, boxes for hemodialysis and cardiac monitoring, Components for cardiac surgery, Valves and fluid control components, others 3-Industrial: electronic parts, household appliances and household appliances, others.

All the products for "mould cleaning"

Appliances

See all products
ULTRATECNO POWER ULTRASONIC CLEANING

Spain

UltraTecno is manufacturer of heavy duty ultrasonic cleaning equipment and it is well known for smart, robust and cost-effective ultrasonic cleaning solutions for demanding cleaning applications. UltraTecno Ultrasonic washing machine are specific for their design and construction, and have been developed for superior performance and long life. This approach is reflected both on our standard ultrasonic models, and as well as on our customized ultrasonic installations. Washers together with our cleaning fluids and surface tension additives deliver perfect cleaning results.. UltraTecno provides solutions for this heavy duty industrial cleaning: Ultrasonic cleaning of Engines and Engine components Ultrasonic degreasing in Automotive, Aeronautic and Railway industry Industrial cleaning Solution in Automotive Services and Ship Maintenance Machining and Milling Workshops Ultrasound installation for cleaning and disinfection in Food Industry Cleaning bath and degreasing tanks in Injection molding maintenence UltraTecno is now leading manufacturer in Europe, as: 1. In comparison with standard high frequency 40kHz ultrasonic cleaners, our own technology delivers sound waves with frequency 28kHz which creates bigger cavitation bubbles this means bigger cavitation bubbles and more POWERFUL CAVITATION 2. Our Green Label features provide up to 45% reduction at RUNNING COSTS 3. Our stainless steel design and manufacturing concept is aimed for heavy duty industrial use.

See all products

IMPACT GROUP UK

United Kingdom

Impact Group the UK's leading Suppliers and Installers of Hygienic Surfaces and Systems for Walls, Floors, Ceilings & Doors Nationwide. When undertaking a project that involves hygienic wall cladding, it's essential to get it right the first time. Hygienic wall cladding is crucial in environments where cleanliness and hygiene are paramount, such as hospitals, commercial kitchens, and food processing facilities. Ensuring that the installation is done correctly from the outset not only saves time and money but also guarantees compliance with health and safety regulations. The first step in a successful hygienic wall cladding project is selecting the appropriate materials. High-quality cladding supplies are designed to provide a seamless and easy-to-clean surface that resists mould, bacteria, and other contaminants. PVC and stainless steel are popular choices due to their durability and ease of maintenance. Working with reputable suppliers ensures that you receive materials that meet industry standards and are tailored to the specific needs of your project. Proper installation is the next critical phase. Hiring experienced professionals who understand the nuances of hygienic cladding can make all the difference. Our in-house installation teams will ensure that the walls are properly prepared, the cladding is correctly fitted, and all joints and edges are sealed to prevent contamination.

See all products
ROMMEL PRÄZISIONSTEILE GMBH

Germany

We are your reliable partner for the supply of precision parts. We have been mass-producing precision parts for almost 40 years. our machinery includes Variomatic automatic revolving transfer machines with 9, 11 and 12 stations, some of which are cam-controlled and some NC-controlled with up to 60 NC axes per machine. The machines are specially designed for smooth-running part production with the same performance and quality as series parts. Fully automated production processes and a large range of machining options put us in a position to machine even complex parts in all aspects. We process steel, aluminium, copper alloys and brass, from rings, large coils, rods, lengths or moulded parts to feed magazines. Our range of products is complemented by various deburring technologies, slide grinding, surface processing, ultrasonic cleaning, assembly work and heat treatments.
MASID - UMWELTERHALTENDE PRODUKTE VERTRIEBS-GMBH

Germany

Based on a philosophy that recognises the mutual dependency and interconnectedness of all life, the Masid company was able to find ways that satisfy the aim of replacing toxic products that pose a threat to nature and people with environmentally friendly and life-sustaining products. And a new wood protection concept was developed on this basis – with the development of our products, we have found means that allow wood to be disguised from insects and fungi. This method requires no toxins, so both the wood and the insects (which are also important) are preserved. Masid offers biocide-free products: • Wood-Bliss1: Wood protection, protected against fire and termites • HM1: Wood protection • Stone-Bliss: For masonry restoration • Masan: Anti-mould paint • Moss-free: Protects against algae, moss, lichen virucide: Alkaline Cleaning agents against viruses/bacteria. Cosmetic product: • Nail-Balance: Nail care products for fungal infestations
SPLICE CAST LTD

United Kingdom

SPLICE CAST develop, manufacture and supply an innovative range of quality-critical plastic products for the health-care, pharmaceutical and analytical industries. Our flexible approach allows us to offer you a custom solution to dosing, measuring and sampling challenges. By supporting you step by step, in a logical sequence of product development, we manage the project for you to ensure on-time, within-budget product realisation. By responding quickly to the changing needs of ‘the people who care’ in an ethical, innovative, quality-driven manner, we offer solutions which have an indispensably positive impact on the lives of people. Last year, over 38, 500, 000 plastic products were manufactured in the UK production facility. With 30 years of experience and insight into the world of precision plastic injection moulding, our products are developed and manufactured, not to duplicate, but to provide you with a time and cost saving solution. Facilities are available for controlled manufacturing in clean-room type environments. Consistency, traceability and efficiency are achieved through audited management systems including ISO 9001: 2008. Long-term, rewarding relationships are built up through attention to detail and a flexible approach to your requirements. In a world of electronic catalogues and online ordering, SPLICE CAST Ltd strives to offer a personal, friendly, and helpful service.
PACOSAR SERVICES

Romania

Pacosar Services is a provider for raw material and injection moulding machines for in the thermoplastic industries in Romania. - Exclusive distributor in Romania for JM Polymers : * Mineral fillers : Calcium carbonate and Talc (CACOLIN®, TALCOLIN®) 70% to 82% + PE/PP/PS... * Nucleating Agent : Rapid Inject® for PP and HDPE. * Additives : Antiblock, IR, Processing Aid, Purging/Clean agent... - Sales representative for Bole in Romania (70To to 7000To) * Hydraulic Injection Moulding machine, * Electric Injection Moulding machine, * Two Platen Injection Moulding machine, * Glass and Carbon Finber Injection Moulding machine Plastic industries : Injection, Extrusion, Thermoforming and Injection industries.
ADOMAST MANUFACTURING LTD

United Kingdom

Adomast Manufacturing Ltd, has been producing chemicals for the construction industry for over 40 years and as such we have developed a reputation for offering excellent quality products at competitive prices. Our products are very well established within the industry and we never compromise on customer service.Offering a wide range of products, from mould & formwork release oils, concrete curing agents, cementitious repair mortars, admixtures such as accelerators and plasticisers, along with waterproofing and cleaning products.We are an ISO9001 acredited company, and have WRAS approved products.
E-PROPLAST GMBH

Germany

Our company works with synthetic materials and specialises in the manufacture of PET bottles. Development, design and production of PET bottles and containers: We make PET bottles with volumes of 20 – 1000 ml. We have a production capacity of more than 150 million bottles per year. The one-step injection stretch blow moulding plant and two-step stretch blow moulding plant we use are state-of-the-art technology for the production of PET bottles and containers. We produce our own preforms in modern facilities. Use in industry: Cosmetics, cleaning products, chemicals, honey, mustard, sauces, fruit juices, spirits, vinegar and cooking oil, milk, mixers and other beverages. One of our specialities is the development and production of so-called panel-less PET hot fill bottles. Our flexible manufacturing technique allows us to fulfil small as well as large batch orders at low prices.
DNEPROSTEKLOSERVIS ENTERPRISE

Ukraine

LLC DNEPROSTEKLOSERVIS is one of the Biggest Manufacturer of the Sodium liquid glass and the Sodium silicate. We are ready to offer you the Sodium silicate, module 2, 0 - 3, 5 and the Sodium liquid glass made by the State Standard 13078 -81, module 1.6 - 3.5, density 1.3 - 1.6. The products, made in our company are characterized by the high quality and the strictly controlled technological process. Usage of a sodium liquid glass is mainly due to its binding properties. Sodium liquid glass is used in the following areas: manufacture of molding sand in casting production; as a component of heat-resistant and acid-resistant concrete; as a soil strengthening agent; manufacture of building materials (mastics, putties, primers, etc.); mining and processing industry; chemical industry; pulp and paper industry. Due to the high concentration of the sodium oxide, liquid sodium glass is widely used in the production of detergents and means of chemical cleaning.
SEASON GROUP

United Kingdom

SEASON GROUP is a vertically integrated Electronic Manufacturing Services (EMS) provider founded in 1975: Electromechanical Assembly, Printed Circuit Board Assembly (PCBA), Cables and Wire Harness Assembly, Mold Manufacturing, Plastic Injection Molding and Plastic Thermoforming. With manufacturing facilities in USA, Canada, UK, China and Malaysia (and manufacturing partner Logatech GmbH in Germany), we are dedicated to providing our customers around the world with complete customized manufacturing and engineering services. Season Group has over 800, 000 sq.ft. of manufacturing space and a total of over 1800 employees worldwide. We are ISO9001, TS16949, ISO13485 and ISO14001 certified. Markets Served: Medical / Life Sciences Security / Safety Commercial / Industrial Automotive Clean Technology Niche Consumer Communications / Network Global Locations: Havant, UK Tsuen Wan, Hong Kong Dongguan, China Shenzhen, China Penang, Malaysia San Antonio, USA Reynosa, Mexico Vaughan, Ontario, Canada Richmond Hill, Ontario, Canada Sheffield, UK
DSS

Ukraine

LLC DNEPROSTEKLOSERVIS is one of the Biggest Manufacturer of the Sodium liquid glass and the Sodium silicate. We are ready to offer you the Sodium silicate, module 2, 0 - 3, 5 and the Sodium liquid glass made by the State Standard 13078 -81, module 1.6 - 3.5, density 1.3 - 1.6. The products, made in our company are characterized by the high quality and the strictly controlled technological process. Usage of a sodium liquid glass is mainly due to its binding properties. Sodium liquid glass is used in the following areas: manufacture of molding sand in casting production; as a component of heat-resistant and acid-resistant concrete; as a soil strengthening agent; manufacture of building materials (mastics, putties, primers, etc.); mining and processing industry; chemical industry; pulp and paper industry. Due to the high concentration of the sodium oxide, liquid sodium glass is widely used in the production of detergents and means of chemical cleaning.