Results for

Manufacturer Producer - Corrosion-resistant metals

38 Companies

30 Products

ENERGIETECHNIK ESSEN GMBH

Germany

Energietechnik Essen GmbH – a member of the Georgsmarienhütte Group – bases its capabilities and skills on continuous research and development as well as on experience reaching back to 1811. The Energietechnik Essen GmbH develops, produces and supplies safety-relevant high-tech products, mainly for manufacturers of power generation machinery. When the first turbo-generator was built at the start of the 20th century, the Essen-based company supplied the retaining rings. Retaining rings are placed on the ends of the rotors to fix the copper coil against the centrifugal forces created by the high rotational speeds. The oldest documents in the company's archive relating to non-magnetisable retaining rings date back to 1901. Energietechnik Essen GmbH uses two remelting units, one electroslag remelting unit and one pressurised electroslag remelting unit, to produce the materials for retaining rings.

Website
KB SCHMIEDETECHNIK GMBH - A GERMAN DROP FORGE - CLOSED DIE FORGINGS - ALL STEEL GRADES

Germany

KB Schmiedetechnik GmbH is a highly certified West German drop forge - forgings of all steel grades, including duplex, titanium, nickel-based superalloys like Monel® or Hastelloy®, Incoloy®, Inconel® – up to 130Kg unit weight. We are a drop forge in Hagen (Westphalia), located between the historic “blade & metal" region Solingen and the “soccer city” Dortmund, specializing in small series production of safety-relevant closed die forgings from 200g to 130Kg unit weight of all steel grades and alloys according to following certifications, specifications, and standards: pressure equipment: valves, boiler systems, piping PED 2014/68/EU, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering American Bureau of Shipping (ABS) Bureau Veritas Marine & Offshore (BV) Det Norske Veritas (DNV) Lloyds Register (LR) Nippon Kaiji Kyōkai (ClassNK) Examples are forged components and equipment like brackets, holders, chain links, hoists, lifting hooks, fasteners, pipe connections, pressure-bearing parts, parts for valves like bodies, tube connectors like fittings, flanges and manifolds or pressurized parts for boiler systems like nozzles or headers/ caps, parts and pieces for wagon construction like articulation sockets or plates for buffer systems, parts for special vehicles, weapons, military and more.

All the products for "corrosion-resistant metals"

seawater-suitable, non-embrittling, corrosion-resistant

Website See all products
COLIMET SRL

Italy

COLIMET can claim fifty years experience in Europe regarding non-ferrous metals. It's in the corrosion protection business and is a leader for thermal spraying plants that it offers as an industrial diversification for industrial metal sandblasting and coating to provide corrosion protection coating for steel structures that will last for over 70 years without any intermediate maintenance. It supplies: -Zinc and zinc/aluminium wire from Vertic Zinc Wire OY in Pori Finland -Thermal spraying plants with electric arc spraying from OSU-Hessler in Bochum Germany -Industrial process dust extraction, filtration and collection systems -It trades metal wires (tin, aluminium, copper, bronze, brass, corten steel, stainless steel, etc.) for corrosion and wear protection deposition produced in Finland, Italy, Spain and Germany. It distributes zinc balls, grit and anodes; welded tin wires and alloys; tin anodes. Thanks to its international liaisons COLIMET operates in Europe-Far East-North Africa.

All the products for "corrosion-resistant metals"

LD/U-2 EMD Pistol with extension

LD/U-2 Pistol

300A AAC Push

AntiCor Pistol

Anodes, rods, spheres of Tin and Tin alloys

Website See all products
LBI

France

LBI (Les Bronzes d’Industrie) is a foundry that provides centrifugal (spun) casting. We have the capacity to handle a wide range of diameters, from 80 to 5000 mm and up to 20 tonnes, working with alloys created in-house. Our catalogue includes copper alloys, stainless steels, special steels and aluminiums. We manufacture and machine round items (rings, sleeves, tubes and cylinders) using centrifugal (spun) casting processes. We deliver parts as blanks or machined.

Website See all products
TECHNOLOGICA GESELLSCHAFT FÜR HIGH TECH MATERIALIEN UND VERFAHREN MBH

Germany

Technologica is an expert in high-tech metal, material and process technologies used in the aluminium industry, the electronics and electrical engineering industry, the biotechnology industry and in environmental protection, as well as beings specialists in high-tech products such as tantalum heat exchangers designed for use in the chemical, pharmaceutical and steel industries. In particular, we specialise in master alloys and processes for the aluminium and steel industry, non-ferrous metals, special scrap metals, caesium compounds, high-purity metal halides, corrosion-resistant devices made of Ta, Ti, Zr, Nb, nickel alloys, SiC and graphite. Our high-quality products are sourced partly from overseas and partly from our own production facilities in Germany and Austria. Furthermore, we also successfully advise companies in mechanical engineering, the foundry industry and plant construction. We combine extensive experience, highest standards of quality and cost-efficient thinking to create optimum solutions

See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

BIMO TECH

Poland

ISO 9001 & 14001 certified custom manufacturer and distributor of heat resistant and corrosion resistant metals and alloys in different forms including bars, pipes, tubes and tubing, wires, rods, sheets, plates, coils, angles, channels, springs, blanks, flanges, cylinders, discs, pins, fasteners, plugs, rings, rolls and strips. Metals we provide include: tungsten, tungsten carbide, molybdenum, niobium, tantalum, zirconium, titanium, nickel, copper, powders, and rare earth metals. We also produce a complete range of components, sputtering targets, resistance welding electrodes, custom shapes, and machined parts. We specialize in metallurgical testing and custom component manufacturing carried out by highly-skilled teams of professionals. The strict requirements we demand in every phase of production makes us an ideal partner for sensitive projects. Markets served include chemical, automotive, industrial, aircraft and aerospace, medical, sports, power generation, marine, mechanical, construction, food and beverage. No matter your need, the size of your order, or what industry you are in, we do our best to supply your products on-time, of the highest quality, and the best value. A non-exhaustive list of our services includes: filling all types of custom packing and delivery requirements, precision grinding and polishing, abrasive and bandsaw cutting, shearing, grit blasting and cleaning, ultrasonic and dye penetrate testing, and applying special protective coatings.
AMETEK SPECIALTY METAL PRODUCTS

United States

AMETEK Specialty Metal Products (SMP) is a global leader in manufacturing advanced high-quality metallurgical products for critical applications. Our custom-made specialty metal products range from precision metal strip, ultra-thin foil, specialty shaped wire, engineered components, thermal management materials, water atomized powders, precision tube and roll-bonded clad plate. Our businesses represent a world-leading force in producing high-performance metal products for markets such as medical, energy, nuclear, instrumentation and measurement, electronics, aerospace, defense, automotive, oil and gas, drilling and mining, and industrial. With operating facilities in the United States and the United Kingdom, the Specialty Metal business unit consists of five brands: AMETEK SMP Eighty Four, Superior Tube, Fine Tubes, Hamilton Precision Metals, and AMETEK SMP Wallingford. With 85 years of metallurgical innovation, whenever a new engineering challenge arises, our expert team is committed to support you and develop the highest-quality custom metal solutions that perform without fail and solve your toughest technical challenges.

All the products for "corrosion-resistant metals"

Cu-Ni 715 Copper Nickel Alloy

Nickel Strip And Foil

Clad Metal Plate

Instrumentation Tubes

HPLC Tubes

See all products
BÜCHI AG

Switzerland

Büchi AG – Reactor Systems and Pilot Plants. Büchi AG is a worldwide leading Swiss manufacturer of reactor systems and pilot plants for the chemical and pharmaceutical industry, as well as research facilities, from laboratory and pilot through to production. Our company offers two different product lines: Reactor systems made of glass, enamelled steel and other corrosion-resistant materials. Pressure reactors made of various metals and glass. We offer customised solutions tailored to your specific laboratory, pilot or production requirements. Thanks to our proprietary designs and use of high-performance materials, our reactor systems and pilot plants are suited for the most demanding corrosion and pressure requirements. . With over 75 years of experience, Büchi stands for superior quality and reliability. Our offer covers the entire life-cycle of the plants, from pre-sales consulting and engineering, manufacturing and assembly, right through to after-sales service and plant optimisation. Our sophisticated technical and customised solutions lead to the highest performance of your R & D activities and production processes. The company has all the necessary certifications. A global sales and service network is at your disposal. Reactor systems and pilot plants for chemical research, process development, scale-up, pilot production and commercial manufacturing – Büchi is your reliable partner!

All the products for "corrosion-resistant metals"

Metal free (inert) magnetic couplings & magnetic stirrer drives

Corrosion testing autoclaves

See all products
NANOMAGIC

Ireland

NanoMagic has an ability to deliver cutting edge self-cleaning nano coatings to clients in any part of the world. We can collaborate with our customers to establish, implement and integrate nanotechnology surface protections within a business or home to protect assets, reduce maintenance cost or resolve some common problems, like odor, algae, dampness, bacteria, and many more... NanoMagic is the future in high performance coatings and surface treatments. The NanoMagic range of protective coating products have been developed to provide high performance surface coatings solutions that will last for many years to come. Our high performance nano coatings can protect a number of different surfaces : glass, ceramics, metal, wood, solar panels, textile fabrics and many more. Hydrophobic and photo-catalytic coatings. Easy-clean, self-cleaning hydrophobic coatings.

All the products for "corrosion-resistant metals"

MAGIC HD COAT

See all products
RICA RESINE S.R.L.

Italy

Rica Resine Srl manufactures epoxy systems, monolithic floor coatings, removable, acid- and wear-resistant, for industrial uses. Manufacturer of anti-corrosion, non-toxic flooring for the food processing industry, epoxy adhesives for ceramics, wood and metals, and protective epoxy paints. We are specialised in Private Label production and we have been successfully working for third parties for over 20 years. Our production is for both the international and Italian markets.

Website

GOGEN LLC

Russia

GOGEN LLC manufactures and sells professional wood-fired heater stoves for bathtubs, barrels and pools, wood-fired bathtubs, sauna heaters, Furaco bathtubs and heater accessories. The company produces the following metal and stainless steel items under the MATEA brand name: • External heaters for Furaco tubs with a capacity of 25 and 45 kW. • Internal heaters for Furaco tubs with a capacity of 25 and 45 kW. • A stove pipe with safety screen against burns. • Sets for cleaning stoves and barbecues, ash dumps, grates made of stainless steel. • Wooden hot tubs that saturate the water with healthy substances from wood provide a soothing effect, help relax after a busy day, increase vitality and eliminate insomnia. GOGEN makes household stoves from AISI 304 food-grade stainless steel by method of high-precision argon welding. We check every batch of metal for consistency with the grade through measuring the percentage of chromium and nickel in the metal. The high content of these elements and the low carbon content make steel more resistant to corrosion and high temperatures. Every article is supplied with a datasheet including 1-year warranty and operation manual. MATEA stoves stay in good appearance and quality while in service; they are safe and easy to use. We are looking forward to cooperation with manufacturers of bathtubs and sauna vats, wholesale buyers of steel stoves.

See all products
GIDROLAST CO., LTD

United Kingdom

Gidrolast develops and produces hydraulic equipment for such spheres and branches as machine building and metal working, ferrous and non-ferrous metallurgy, mining; railway equipment; forge-and-press equipment; equipment for sea and river vessels; oil-producing; naval equipment; agriculture and many others. Most of these industries have particular challenges for hydraulic machine manufacturers, regardless of where the operation is planned, deep underground, in a wet or sandy shaft, whether it is a mast part of a forklift, an agricultural seeder operating under the scorching sun, or a marine drilling rig oilfield installation subjected to corrosive spray of salt water, hydraulic equipment produced by Gidrolast are characterized by high wear resistance, providing long exploitation period and productivity. The key characteristics of the equipment produced by Gidrolast are: Reliability; Resistance to corrosion; The simplicity of repair work; Low unit cost; Products of Gidrolast meets the growing requirements for hydraulic equipment. As a result, our products are highlighted by many companies worldwide. Why do companies choose Gidrolast products from the mass of competitors? This question is answered by a number of important reasons: Global Supplier Network; Stable quality; Reliable delivery; After-sales service of equipment; Engineering and technical potential. All the equipment produced by Gidrolast is made according to the customer’s specifications!

See all products

Product recommendations

Germany

R134a Refrigerant Recharge Kit with BPV31 Bullet

Thailand

Si3N4 Silicon Nitride Heating Element Protection Tube

China

China

See more products

NOWENTA

Slovakia

Nowenta is a Slovak manufacturer of GRP (Glass fiber Reinforced Plastics) gratings, and a supplier of diverse composite materials products such as profiles, cover shafts, gully grids and other tailor made products. Recently Nowenta has added to its product portfolio air filters, drainage systems, composite GRP gratings have unique properties that do not have any metal materials. They are used in environments where there is increased humidity, aggressive environments, and where increased material life requirements are imposed. Pultruded GRP Profiles are made from high quality raw material and are provided in different shapes and sizes. They are widely used in hi-tech fields such as aerospace, modern sewing machinery, the petrochemical industry, medical machinery, automobiles, machinery manufacturing, and construction. GRP Tailor Made Composite structures and products consist of composite profiles and gratings which are made of isophthalic resin and glass fibers with a topcoat. The properties of these materials allow installation in high-demand environments where there is a requirement for chemical and corrosion resistance. Within HVAC filters, the current program covers more than 2, 000 different standard and special filters, which provide clean air in commercial, industrial and residential areas. Finest emulsion mists, toxic vapors, fine dusts and material chips are filtered just as reliably as odors, bacteria, fungus pores or viruses.

See all products
ZAVOD KRONAKRIL LLC

Russia

Zavod Kronakril is the major Russian producer of inorganic zinc phosphate — a corrosion protection pigment for industrial paints in the form of a white powder that exhibits low toxicity, increases adhesion and improves the protective properties of paints and varnishes. The company also produces non-food pigments and dyes for manufacturing paints and varnishes. The company has been working in the Russian and international markets since 2003. Since 2018, 80% of Russian producers of corrosion-resistant paintwork materials opt for products by Zavod Kronakril®. The pigment is also used in the production of primers or single layer anti-corrosion coatings for metals based on epoxy, acrylic and alkyd binders and in water-based systems. The range of corrosion inhibitors produced by the plant includes: •KRONPHOS® PZ is the zinc phosphate dihydrate with zinc content of 45.0-52.0% •KRONPHOS® PZC is a pigment with an optimal combination of zinc, phosphorus and calcium. •KRONPHOS® PZA is the basic hydrate of zinc orthophosphate and aluminium with a higher phosphate content than that of zinc phosphate. •KRONPHOS® PZM is the basic hydrate of zinc orthophosphate and molybdenum. It exhibits increased resistance to corrosion currents, both anionic and cationic properties. •KRONPHOS® CP is a calcium phosphate. It enhances anti-corrosive properties and adhesion strength. Since 2019, the products of Zavod Kronakril® are certified pursuant to the REACH standard for free circulation in the EU.

All the products for "corrosion-resistant metals"

Anti-corrosion pigment zinc phosphate

Anti-corrosion pigment zinc phosphate

See all products
ACEROS METAL TREATMENT

Netherlands

Emergo Metal Treatment specialises in the cleaning and maintenance of stainless steels and non-ferrous metals. Stainless steel is resistant to wear and dirt but not unless it is properly maintained! By eliminating rust and carrying out regular maintenance, lifespan is extended and problems of corrosion avoided. Emergo Metal Treatment has in stock all the products necessary for maintaining stainless steel in perfect condition: rust removal products, maintenance products, tarnish removal and polishing products.
TRANSCERAM GMBH

Germany

Manufacture of carbide formed parts and erosion blocks and corrosion-resistant carbide blanks and semi-finished products. Manufacture of parts to design from carbide, silicon carbide and other technical ceramics to customer specifications. Carbide and technical ceramic wear parts for pumps (seal rings, plain bearings, compression rings, valves, pistons, etc.) made to order; metal-ceramic components and feedthroughs (sales) portfolio; using materials including: Carbide (tungsten carbide); corrosion-resistant carbide; silicon carbide (SSiC and SiSiC); zirconium oxide (ZrO2); silicon nitride (Si3N4); aluminium oxide (Al2O3); metal-impregnated graphite; precision grinding for hard materials and hard coatings; flat grinding, cross grinding, cylindrical grinding and jig grinding, flat lapping and cylindrical lapping and polishing; using joining techniques including: Shrinking, brazing and adhesives. Our products include: Ceramic for technical applications, high-performance ceramics, ceramic plain bearings, carbide wear parts for machines, carbide blanks and ceramic seal rings
TK BATO SP. Z O. O.

Poland

TK BATO is a Polish manufacturer of high-quality anti-corrosion liquid paints, thinners and wood products manufactured in accordance with Polish and European standards (PN-EN ISO 12944). For almost 30 years, we produce corrosion protection paint systems for steel and non-ferrous metals have been an ideal solution for professionals, special applications and general-purpose sites. Our paints are widely used in steel structures, machines, pipes, metal roofs, high operating temperature equipment, etc. They form a durable coating that provides the highest corrosion protection in the corrosion categories C-1 to C-5.As a manufacturer, we are able to modify our products to meet customer needs and also offer new solutions for corrosion protection and other special applications of paints and varnishes.Our offer includes: one-component paints: alkyd, polyvinyl, chlorine rubber, acrylic, phthalate, hammer, water-base two-component paints: polyurethane, epoxy, heat-resistant, fireproof, chemical-resistant, which are available in different packages from 0.8 l can to IBC 1000 l.

See all products
MEKSIS MECHANICAL SYSTEMS

Turkey

MEKSIS A.Ş. prides itself as one of the most prominent manufacturers of Turkey, the Middle East and Europe, in the field of heat devices (hot water boilers and steam generators) and bolted modular water storage tanks with a worldwide aftermarket services and leading equipment supplier. Since 1982, MEKSIS A.Ş. specializes in the design, production and assembly of various kind of sectional modular water reservoirs in both rectangular and cylindrical shape construction ranging in capacity from 1 ton to 10, 000 tons with using state of the art components and high-quality materials such as stainless steel, hot galvanized steel, GRP (Glass reinforced polyester) and steels coated with epoxy, special membrane and paint which are resistant to corrosion, chemical attack and wear. Our company has very advanced metal preparation, coating, blasting and painting facilities which are able to accommodate any size of panels.
JELN IMPRÄGNIERUNG GMBH

Germany

JELN GmbH develops and produces coatings for wear protection and corrosion protection as well as casting compounds for machine maintenance and the production of new machines. Our production range also encompasses impact-resistant adhesives (for attaching wear protection ceramics) and adhesives approved for food products. Our impregnation agents division includes sealers for rapid prototyping, casting and thermal spraying. Our own sealers are certified by TÜV. Jeln also offers the development of new, customized products produced in cooperation with our customers. Together with our partner companies, we offer a full maintenance service, meaning from worn parts through to ready-to-install parts. Our products include: Impregnation resins, epoxy resins, casting resins, polyurethane-based coating agents, epoxy resin adhesives, incombustible adhesives, wear-resistant non-stick coatings, impregnation agents for cast parts, metal impregnation and wear-resistant coatings
SWINTON ELECTRO-PLATING LTD

United Kingdom

Metal Finishing Services. Manchester based providing Hard Chrome coatings up to 8.5 metre lengths for abrasive wear-resistance. Electroless Nickel coating service to provide high, corrosion resistance. Serving all engineering industries including Automotive, Rail, Defence, Aerospace, Hydraulics, Oil & Gas, Chemical, Pharmaceutical, Paper & Board, Printing - and many more OEM's. Also providing a repair service to reclaim worn components to extend the service life of Production Equipment in any Manufacturing sector. Mould & Press Tools are a speciality utilising in-house facilities and expertise. All metallic machine parts can be coated for protection and to provide a surface finish that gives low friction and extended life. Highly polished or textured surfaces can be achieved to suit individual applications. One off, unique, components or large production batch coatings can be accommodated. Preparation by Grit Blasting, Polishing and Cylindrical grinding also available on-site.

VISTA METAL ALM. LTD. STI.

Turkey

Vista Metal is a leading Company in the Aluminium sector in Turkey. Aluminium systems are important to construction sectors and have been continuing to give strong and aesthetic view both inside and outside of buildings. Aluminium has given a different view to buildings and has a strong, aesthetic and decorative view. Together with aesthetic view it has resistance to corrosion, long life and low cost. Our main products: Aluminium Balustrade accessories, Aluminium Windows and doors accessories, Aluminium Glazing balcony and Aluminium Glazing balustrade systems.
GREEN CITY INTERNATIONAL

Serbia

Manufacturing, selling and servicing of metal and steel waste containers and waste managment equipment and systems. Company offers wide range of recycling bins with different storage capacity. Galvanized waste containers with capacity of 660, 1100, 2400 and up to 3200 liters. All bins are manufactured in Serbia with high quality deep pressed steel and metal sheets with appropriate design that ensures stability and resistance to mechanical stress. Also there are all galvanized and hot diped that ensures strong and effective protection against corrosion. Companies main product is galvanized steel bin with a capacity of 1100 liters. With this products company is among leaders in this field in Balkans. Other company products are skip and roll containers transfer stations and outdoor cleaning trolleys. Company is a worldwide oriented with main markets in United States, United Arabian Emirates, Great Britain, Germany and others. For more details about products visit companies website.
SINTEX A/S

Denmark

We are an ambitious Danish development and production company, which finds innovative new solutions in order to help our customers to step into a greener solution. Our employees are dedicated specialists in their fields, who create valuable, innovative applications in close cooperation with our customers working from idea generation all the way to high volume production as a one-stop-shop. We work with powder metal applications such as: Sintered stainless steel, sintered stainless steel filters, MIM (Metal Injection Moulding), metal spraying, permanent magnets, SMCs (soft magnetic composites) and permanent magnetic systems such as magnetic couplings and magnetic rotors. Our thermal spray solutions are used as frictions shims in large constructions as well as bearing systems designed for water applications. Our latest development is within powder extrusion where we can make very complex shaped parts equal to 3D printing - but with a production rate that enables high volume production. We serve industries as automotive, pump manufacturer, food industry, offshore, medico, sound etc. where high quality combined with demand for corrosion resistance, lower weight and higher efficiency is a need in order to become more sustainable.
VISAN VIDA SANAYI

Turkey

Visan Vida Industry started its activities in Istanbul, Turkey in 2013. Our factory, which is established on a total area of 5000m2 with 3.500m2 closed area, 1500m2 open area and raw material warehouse, has an annual production capacity of 1.5 Billion Pieces. It provides services in the supply of screws and fasteners to companies from many different sectors, primarily White Goods, Electrical Appliances, Electrical and Electronic products. As a product item, we manufacture products up to 100mm in length with a min Ø2 max Ø8 dimensions. Screws in all head shapes (Pan Head, Countersunk Head, Raised Countersunk Head, Hex Washer Head, Button Head Etc. PZ-PH-TX-SW Recess Types) and All Thread Types (Metric, Sheet Metal, Chipboard, Plastic, Plastic 30°, HiLo, Braked, Grooved), rivets, eye rivets, pins, stepped pins etc. We manufacture our products from iron, steel, stainless steel, brass and copper materials. In our own laboratory; We perform Hardness Test, Salt Spray Test, Tensile Test, Profile Projection, Recess depth and all other measurement determination processes. We are coating Black, Yellow, White, Geomet, Galvanized coating types in accordance with 48H, 72H, 120H and 720H corrosion resistance. Tufloc and Loctite types can be made as Screw Locking types. It offers its customers free of charge raw material, heat treatment, coating and material output quality reports for all shipped products.
INTECHEM POLYMER SYSTEMS

United Kingdom

Intechem is a global supplier and manufactrer of speciality thermoplastic polymer powders based in London. We specialise in fine thermoplastic polymer powders engineered and formulated specifically for end user market eg. anti-corrosion coating of metal parts in powder and granule form, 3D SLS powder, as additive in liquid paint and floropolymer systems and much more. We formulate and supply nylon, polyester and thermoplastic polymer Alloy powders offering high abrasion resistance, flexibility, high impact resistance, temperature resistance from boiling water to minus 50c . Our powders are supplied within the average particle size range 30 microns to 300 microns depending on the polymer, application process and end user market.
3P - PRODUITS PLASTIQUES PERFORMANTS

France

3P manufactures innovative products in high-performance polymers (PTFE, PFA, PEEK, etc.) and composite materials for the most demanding industries. With their outstanding characteristics (resistance to very high temperatures, resistance to stress, corrosion, wear, chemical inertia, low friction coefficient, etc.), 3P's products are especially designed for the automotive, the aerospace, the fluid handling system, the energy industries, and the general industry. Very light and resistant, they are the perfect solution to replace metal parts in industrial equipment’s and can be used in the most critical exposures. 3P's ranges of products include tapes, tubing and hoses, bands, custom products, basic shapes, and composite products. 3P works on request, and designs and develops innovative parts to answer specific needs. Certified ISO 9100, ISO 9001, ISO 14001, and ISO/TS 16949.
PJSC SPU DNEPROPRESS

Ukraine

Dnepropress, heavy hydraulic presses plant, was established in 1955. The plant has developed and produced more that 140 models of presses with total number of 12, 000 items as well as hundreds of mud pumps and high pressure pumps that are used in a variety of sectors in industry and extraction. The plant’s technical resources enable it to conduct the full maintenance cycle from melting to mechanical processing and assembly of large-size units and machinery. We manufacture: PRESS-FORGING EQUIPMENT AND REPLACEMENT PARTS HIGH-PRESSURE PUMPS FOR PRESSES, MUD PUMPS AND REPLACEMENT PARTS FOR OIL AND GAS INDUSTRY REPLACEMENT PARTS FOR MINE-MILL MANUFACTURING EQUIPMENT HEATING PLATES FOR WOODWORKING INDUSTRIES METAL STRUCTURES OF ANY COMPLEXITY REPLACEMENT PARTS FOR METALLURGICAL AND ROLLING EQUIPMENT FORGINGS: • ingots up to 12, 5 tones • forgings of all levels of complexity of carbon, alloyed, corrosion resistant steel grades and titanium alloys.
UAB KUBILU PASAULIS

Lithuania

UAB Kubilu pasaulis manufactures and sells professional wood-fired heater stoves for bathtubs, barrels and pools, wood-fired bathtubs. The company produces the following metal and stainless steel items under the KP brand name: • External heaters 26 and 30 kW. • Integrated heaters of 35 kW. • A stove pipe with safety screen against burns. • Acrylic hot tubs that help relax after a busy day, increase vitality and eliminate insomnia. UAB Kubilu pasaulis makes stoves from AISI 304 and AISI 316 food-grade stainless steel by method of high-precision argon welding. The high content of these elements and the low carbon content make steel more resistant to corrosion and high temperatures, also this steel is very resistan for chemicals that are often used for hottubs. Every article is supplied with a datasheet including 2-year warranty and operation manual. KP stoves stay in good appearance and quality while in service; they are safe and easy to use. We are looking forward to cooperation with resellers of bathtubs , wholesale buyers of steel stoves and hottubs or hottub shells.
NANOGRAPHENEX

United Kingdom

At NanographeneX, our mission is to facilitate the distribution and adoption of nano-sized building blocks in various industries including the Aerospace, Defense, Chemistry, and Automotive sectors amongst others. The materials will also be supplied to forward-thinking research centres, universities, and institutes of excellence to further the understanding of their unique properties. Thus, enabling the continued productions of advanced technologies with the remarkable thermal and electrical conductivity, density, and resistance to corrosion that these wondrous materials provide. Through our combination of industry and academia, Nanographenex is able to develop new nanomaterial applications for challenging engineering works while providing them to over 80 countries. Our company was founded in 2020 and works with the most progressive, dynamic, and smart minds in Europe to create pioneering Nanotechnology that we believe will change the world for the better. The following are some of the products we offer: Graphene, CarbNanotubes, Fullerene (produced in different ways for different applications) High Quality Nanoparticles and Microparticles (Elements, Alloys, Metal and Non-Metal Oxides, Compounds) Nano and Microparticle Dispersions 3D Printer Materials Anti-Friction Coatings Infrared (IR) Dyes Wafers of Various Kinds and Properties (Si, SiO2, Si-SiNx, Borosilicate Glass, Fused Silica, Quartz and GaAs Wafers)
MEGAL

Serbia

Company Megal has a 30 years-long tradition of producing various metal furniture for versatile purposes. All our products are made of high-quality steel, protected with modern powder coating technology, which makes our products highly resistant to corrosion. Our price-quality ratio is well known in the Serbian market and we are one of the leaders in metal shelving and furniture producer.