Results for

Manufacturer Producer - Calibration services

71 Companies

24 Products

TEMPERATURMESSTECHNIK GERABERG GMBH

Germany

Since its foundation in 1990, tmg has established itself on the German and international market as a specialist in electrical temperature measurement technology. The family business is now run by the second generation of the same family. The product range offers intelligent and reliable solutions for almost all industrial sectors. To this day, the core business consists both in producing a wide variety of standard thermometers with an extensive array of design variants and in developing and producing customer-specific and industry-oriented sensor designs. The continuous production capacity expansion and the technological equipment extension enables the continuous new and further development of products. Quality control checks, calibrations and metrological tests are carried out during production in the company's internal calibration laboratory with DKD and DAkkS accreditation.

Website
HÖNTZSCH GMBH

Germany

Flow measurement technology has been the core of our business since our company was founded in 1966. From 1976 onwards, Höntzsch has worked to develop, manufacture and distribute innovative and groundbreaking products in the flow measurement sector, and has been part of the DMT GmbH & Co. KG group in Essen as of 2012. Höntzsch also offers solutions for special areas of application such as explosive zones in accordance with ATEX, for gases with operating temperatures up to 550 °C, for measurements under regulatory control in accordance with the "TA Luft" air pollution control regulation and sections 13 and 17 of the "BImSchV" (the German Federal Imission Protection Ordinance), for high flow speeds of up to 200 m/s or for flows with changing directions of flow. Our DAkkS-accredited calibration laboratory completes our range. Air flow meters, calibration service for electrical measuring and testing equipment, development of flow meters, intrinsically safe sensors for explosion protection areas, compressed air measurement, intrinsically safe equipment for explosion protection areas and compressed air flow meters

Website
B + B THERMO-TECHNIK GMBH

Germany

Since 1984, B+B Thermo-Technik gas been developing and producing innovative product and industry solutions with the highest quality standards for precise measuring jobs. Benefit from our many years of experience and expertise. We are based in the town of Donaueschingen in the south-west of Germany. From here, our quality products are distributed all around the world. The latest technologies in research, development and manufacturing and our certifications in accordance with DIN EN ISO 9001: 2015 and DIN EN 61340-5-1 mean that we produce our products to the highest quality standards. We also provide our customers with test certificates and DAkks (the German national accreditation body). calibration certificates. Quality and proximity to customers are integral parts of our strategy. This is why we predominantly manufacture in Germany and at fully owned subsidiaries all over the world. We guarantee continual quality controls, flexible responses to customer requests and modifications, as well as timely deliveries.

Website See all products
IL METRONIC SENSORTECHNIK GMBH

Germany

The company was founded in 1992 with just nine employees and built upon a 30-plus year tradition of manufacturing glass feedthroughs. This particular business sector has evolved in to the company's core business, creating customer-specific applications in the field of pressure sensors, humidity sensors and UV sensors in line with market demands. Innovative applications in the medical field or in corrosive environments use stainless steel as well as titanium or Inconel to make turned parts. In the UV and humidity sensor sectors, we develop, produce and distribute sensors, sensor modules and electronic equipment. We currently offer a complete range of UV sensors, measuring windows, UV display devices and reference measuring devices, in particular for the market of UV disinfection for drinking water, utility water and ballast water on ships. In 1996, the company was certified in accordance with DIN EN ISO 9001 and also became qualified to provide training.

Website
BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG

Germany

With passion for precision and quality the German brand burster precision measurement technology develops and manufactures since 60 years as one of the most important suppliers precision instruments, sensors and systems for sensor signal processing and process monitoring. burster applies highest quality standards in its production of components and systems in accordance with EN ISO 9001: 2015. burster supplies 7500 customers worldwide. burster’s innovative and experienced team provides intensive application support even before a decision to buy is made. Solving complex measurement problems and integrating measurement and test technology into production environments for production control, quality assurance and test-equipment monitoring are everyday's instrumentation tasks. burster supplies measuring technology ranging from individual sensors to system solutions, with emphasis on plant construction and engineering, automation, the automotive industry and its suppliers, electrical and electronic engineering and chemicals industry. It also has a presence in numerous other sectors and future markets such as electro-mobility, alternative energies, medical engineering and biotechnology. In addition to solutions employing standard products, burster provides custom OEM solutions. Many years of experience as manufacturer of measuring sensors and instruments guarantee optimum solutions. This has earned burster an international reputation for innovation geared to customers’ needs.

All the products for "calibration services"

Precision RTD simulator -Model 4530

Universal calibrator - DIGISTANT® 4420

DIGISTANT® 4462, High precision calibration

TRANS CAL 7281

Precision PT100 simulator - Model 4506, 4506 S

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

ATEQ UK LTD

United Kingdom

ATEQ, founded in 1975, is the industry leader specializing in the manufacture and supply of automatic leak testing machines and leak test systems for assembly lines and laboratories. Our team, supported by industry experts, is fully equipped to address the product quality testing challenges you may face. With decades of experience, we have honed our expertise in leak testing, including tracer gas leak testing with Helium and Hydrogen gases, precise calibrations, and advanced flow testing solutions. Our long-standing commitment to excellence and innovation ensures that we deliver reliable and accurate results tailored to meet the specific needs of our clients across various sectors, including Automotive, Industrial, Medical, Packaging, E-Mobility, and Hydrogen. We understand that conducting quality checks within the shortest testing time is critical for your factory. Our team of experts, with multiple years of experience, is here to help you achieve the best results. Our service spans the entire lifecycle of your product, from technical consultation and installation to after-sales support and calibration. With a global presence in over 40 countries, we are equipped to meet all your leak testing needs, wherever you are. Our commitment to customer satisfaction and extensive experience make us the trusted partner for all your leak testing needs.

All the products for "calibration services"

Calibration Service

Cdf7000

Cdh6000 – Calibrator For H6000 Leak Detector

Cdf60 -compact Hand-held Leak/flow Calibrator

Cdp60 – Compact Hand-held Pressure Calibrator

Website See all products
TEST GMBH

Germany

Our universal testing machines for traction, pressure, bending forces and torsion are used in research and quality assurance for materials and components. Comprehensive solutions for testing screws and connectors form the second pillar of our product range. The portfolio is rounded off by force and torque gauges. Modern technologies entail new materials which, in turn, call for new applications, functions and components. We offer our customers a complete supply chain, from design and implementation, installation and training, right through to maintenance and calibration of the testing systems.

All the products for "calibration services"

Calibration Service

See all products
OPSYTEC DR. GRÖBEL GMBH

Germany

Opsytec Dr. Gröbel GmbH is a renowned manufacturer and provider of high-precision measuring equipment and radiation sources. Thanks to decades of experience in development and production, Opsytec provides innovative solutions for a wide range of applications in the fields of measuring equipment and light technology. The extensive product range includes UV lamps, UV measuring equipment, radiation detector and customer-specific systems used in fields such as material testing, environmental monitoring and medical technology. Opsytec places great emphasis on quality, reliability and precision, a fact that is reflected in the high level of customer satisfaction. The company also provides a comprehensive range of services, including calibration and consulting, to meet the specific requirements of its customers. Opsytec products are used in laboratories, research facilities and industries around the world and are characterised by their durability and excellent performance.

Website See all products
GENERAL MEASURE TECHNOLOGY LTD.

China

General Measure Technology Co. Ltd, a reputable company that specializes in the design, manufacture, and supply of a wide range of weighing equipment and solutions. With over 25 years of experience in the industry, we have established ourselves as a trusted name in the weighing industry, serving clients across different sectors and industries. We pride ourselves on our commitment to providing high-quality products and excellent customer service. We understand the unique needs and requirements of our clients, and we work closely with them to provide customized weighing solutions that meet their specific needs. Our product range includes precision balances, industrial scales, weighbridges, and many other weighing solutions. We also provide after-sales support, including maintenance and calibration services, to ensure that our clients' equipment is always in top working condition. Our team of highly skilled engineers and technicians are dedicated to delivering the best possible service to our clients. We use the latest technology and equipment in our manufacturing processes, ensuring that our products meet the highest standards of accuracy, reliability, and durability. At General Measure Technology Co. Ltd, we are committed to excellence in everything we do. Whether you are looking for a standard weighing solution or a customized solution for your specific needs, we are here to help. Contact us today to learn more about our products and services.

Website See all products
MINEBEA INTEC BENELUX

Belgium

Minebea Intec is a world leader in the design and manufacture of robust load cells, high quality laboratory and industrial scales, weighbridges and in-line inspection equipment. We propose a full service including legal metrology verifications of scales, industrial weighing systems and weighbridges. Our comprehensive range of Metal Detectors, Checkweighers and X-ray systems allow us to provide the most efficient and cost-effective solutions for all food product inspection requirements. Our core market position, that of a leading global product and solution provider together with our aim to set strong standards in all areas of our business, are both reflected in our company motto: 'The true measure'. We have almost 70 years experience in supporting the industry to ensure that manufactured goods have the right quality and do not contain any foreign bodies. Our ability to do this, is based on the 'German Quality' of our products and services combined with our continuous investment in developing leading technology. As a result, tens of thousands of customers put their trust in our company. Via our world-wide presence, we stand beside our customers around the globe and through the whole life cycle of our products and solutions: from assistance with selecting the right equipment, design-in support, installation & calibration and maintenance & repair services up to realising equipment upgrades and refurbishments and providing user trainings.

See all products

KÄFER MESSUHRENFABRIK GMBH & CO. KG

Germany

Käfer Messuhrenfabrik GmbH & Co. KG was founded in 1932 as a mechanical workshop for dial gauges. Today, the company is the largest independent manufacturer of dial gauges and measuring equipment in Europe with over 100 employees at our site in Villingen-Schwenningen (at the edge of the southern Black Forest). With our many years of expertise in construction, manufacturing and quality assurance, we manufacture according to the latest production standards and with consistent high quality. Our wide network of distributors now sells hundreds of different Käfer dial gauges. It is not just our flagship models that are produced in Villingen-Schwenningen, though – we also manufacture special dial gauges according to customer requirements. Our calibration and repair service in Villingen-Schwenningen provides the ongoing opportunity to have your dial gauges serviced quickly and reliably.

See all products
SIMCO-ION EUROPE

Netherlands

For over 50 years Simco-Ion Europe is a leading manufacturer of equipment for the elimination of static electricity. We are a partner for OEM worldwide and have an extensive knowledge base and many partners that operate locally worldwide. We supply many industries with standard or tailormade static eliminators or equipment to manage the presence and level of static electricity in machines and products. The plastic industry is of great importance to us, but also on the packaging, converting, printing, textile and graphical industry we have been providing fast and reliable solutions for many years. All of our products are distributed through a global network of skilled distributors and agents. Simco-Ion Europe produces: 1.Industrial static eliminators We produce a wide variety of static eliminators under with ISO 9001 certification. Complete DC-eliminator range is provided with 4 years warranty 2.High voltage generators We are producing a large variety of industrial high voltage generators for many different types of industries like IML, plastics and converting industry 3.Measuring tools We are producing handheld electrostatic fieldmeter for measuring and detecting static electricity as well as inline(in the machine) types 4.Service Full repair and calibration service for all Simco-Ion Europe products: Air knife, Air nozzle , ionizing air blower, static elimination blower, ionizing bars static control system, industrial static eliminator, FMX and Manager IQ Easy.

See all products

Product recommendations

United Kingdom

Germany

Germany

Germany

See more products

HEGEWALD & PESCHKE, MESS- UND PRÜFTECHNIK GMBH

Germany

Made in Germany: Hegewald & Peschke has been developing, producing and distributing high-quality machinery for material testing, component testing and furniture testing since 1990. Thanks to a modular construction concept for the whole of the testing technology, we can also implement individual customer requirements in addition to series production. Our product range includes universal testing machines, machines for component and furniture testing, special testing technology and 1D length measuring devices for industry and research. In addition, we offer you the respectively appropriate test software and we support our customers with free application support for our test software over the entire lifecycle of the test machine. Our company comprises approx. 75 employees. We create, design and build our products in Germany. Numerous regional sales and service offices all over the world guarantee quick and reliable consultation and support for our customers in the respective national language. In addition to our testing technology, we offer various services relating to testing and measuring, as well as the retrofitting of universal testing machines. We are certified in line with ISO 9001 and perform calibrations with DAkkS accreditation. We offer all services from a single source: Consulting, design, software development, production, calibration, service and maintenance.

See all products
F.LLI GALLI G. & P. SNC DI RENATO GALLI & C.

Italy

Since 1960, Fratelli Galli is Design, Manufacturing, Sales and Service of Laboratory and Industrial Equipment. Galli Co. is Certified UNI EN ISO 9001: 2015 and FGAS CE 303/2008 Fratelli Galli offers a wide range of Equipment where Temperature, Humidity, Lights, Gas, Vacuum, Vibration and other environmental parameters are under control. Standard or Customized with Galli you will find your Solution. >Environmental Simulations Climatic Test Chambers, Thermal Shock, Shakers. Emission Test Chambers for VOCs Formadeide. Lithium Battery Test Chambers and Apparatus. >Drying, Heating, Ageing, Ashes Ovens, Vacuum Ovens, Precision Ovens, Muffle Furnaces. >Heating, Growing, Testing Incubators, CO2, Cooled Incubators, Stability Climatic Chambes. >Cooling, Storage Refrigerators, Freezers, Deep Ultra Low Freezers. >Corrosion Test Cabinets Salt Spray Chambers, Ciclyc Corrosion Test Chambers, Acetic, SO2, Kesternich. >Thermostatic Baths and Circulators Water, Oil and Sand Baths, Criostats, Ultrasonic, Viscosity Baths. >Water treatment Distillators, Demineralizating columns, Flocculators. >Light Sources, Ageing, Test. UVC Light, IR Light, Xenon Light. >Service Installation, Calibration, Repair, Revamping. >Sell and Renting of Refurbished and Second Hand Equipments.

See all products
SCHMIERER GMBH

Germany

High-quality precision pressure gauges in line with certified quality standards and available worldwide in the shortest possible time. With 90 years of experience, we can fulfil special and individual requirements for pressure gauges and thermometers. With our in-house production facility and an extensive range of assembly and test devices, you receive your products from our production site in Groß-Gerau, Germany, in accordance with quality standard ISO 9001: 2015. It goes without saying that you get a special service from Schmierer! Calibration, filling and adjustment of pressure and DP transmitters and fitting of various diaphragm seals are also possible for third-party brands. You can also benefit from our proven repair service, whereby we repair your pressure gauges and transmitters, including those from third-party brands, to save you time, money and resources. Collaborate with a supplier with a long-term approach that conserves resources thanks to EcoVadis certification (sustainability certificate)
CHEMIFARM SRL

Italy

Accredited Laboratory WE ARE ACCREDITED FOR PRODUCTION (RMP n° 186) AND FOR CALIBRATION (LAT n° 186) Accreditation gives the calibration certificates and reference materials produced a high degree of reliability in terms of quality and safety of the goods and services subject to verification and guarantees their recognition on international markets. Meaning of accreditation: certification by Accredia, Single National Accreditation Body (Reg 765/2008) acting as guarantee above the parties for competence, independence and impartiality of calibration laboratories and manufacturers of reference materials, certifying compliance with the standards of products placed on the market; the accreditation attributes value and reliability to products and calibrations Reference materials, Calibrations, Set-up of laboratories and instruments We produce both accredited and ISO traceable reference solutions, with standard values or at customer's request. We perform both accredited and traceable calibrations. We design and supply laboratories complete with furnishings, instruments and structures (B-LAB line). Production We are the only centre in Europe (RMP N. 186), capable of producing synthetic reference materials in solution at such low electrolytic conductivity values 0.6 μS/cm. Producer of ISO reference materials. Calibration Accredited laboratory (LAT N. 186) for the accredited calibration of pH meters, conductivity meters and refractometers; calibration service with traceable report

See all products
ANDJANA INSTRUMENTS UG

Germany

Andjana Instruments offers safe compressed-air quality – air quality monitoring – behind compressors – filters – activated carbon – measuring residual oil content and more: Comprehensive modular compressed air and gas measuring technologies for oil content, volumetric flow, humidity, pressure dew point, particle measurement, pressure, temperature, gases, emissions with optional data acquisition and remote diagnosis according to HACCP – GMP and FDA requirements, ISO 8573, EN 12021 breathing air; validated data records according to FDA 21 Part 11 with audit trail. Metrological safety for industry and hospitals – breathing air systems – laboratories, cleanrooms. Medical hospital breathing air systems according to ISO 7396 – European Pharmacopoeia; risk monitoring for medical compressed air – in-house production in accordance with the Medicinal Products Act; quality control for medical gases – oxygen – nitrogen – compressed air of own production. Standard and CE conformity assessments for medical gas supply systems; job measurements, calibration service, service
IMPACT TEST EQUIPMENT LTD

United Kingdom

Impact Test Equipment is a leading manufacturer and supplier of laboratory and site testing equipment to civil engineering, construction, mining and aggregate industries, as well as concrete, cement and asphalt manufacturers, geotechnical laboratories, educational and research establishments, government ministries, resellers, engineers and consultants. We also manufacture test sieves and have been supplying to engineering, mining, chemical, pharmaceutical, agricultural and food industries for over 20 years, and are proud to have a reputation for supplying quality products and excellent service. Our sieves are manufactured to the highest standards, with seamless frames to ensure a precise fit and superior quality. All sieves are supplied with certificates of conformity, or with UKAS calibration if required. Our products are designed, manufactured and tested to the highest quality, to ensure, reliability and durability with trouble free operation for site or laboratory environments, whilst returning accurate and repeatable results. From moisture content tins, to microprocessor controlled testing systems, Impact endeavour to be your one stop location for all your testing requirements. We also offer in-house or on site servicing and UKAS calibration for equipment and a full UKAS re-calibration service on all test sieves. UKAS accredited calibration laboratory number 0419.
GOLD STANDARD PHANTOMS

United Kingdom

Gold Standard Phantoms is a dynamic spinout company from the renowned University College London's Institute of Neurology. Our mission is to revolutionize the field of medical imaging by bridging the gap between pattern recognition and precise scientific measurement. Through strategic collaborations with clinicians, radiographers, radiological societies, imaging manufacturers, pharmaceutical companies, and regulatory bodies, we provide an all-encompassing solution for maintaining standards in quantitative medical imaging. Our vision is clear - to become the global leader in delivering calibration services for clinical quantitative medical imaging. We are dedicated to empowering the healthcare industry with cutting-edge calibration solutions, enabling medical imaging to transition from subjective pattern recognition to a robust, quantitative, and reproducible scientific measurement methodology. With unwavering commitment to excellence, innovation, and collaboration, we are at the forefront of driving advancements in quantitative medical imaging. Our team of experts works tirelessly to ensure that healthcare professionals and researchers worldwide have access to reliable calibration services that elevate the accuracy and reliability of their imaging results.

See all products
SCALESMART.COM

United Kingdom

ScaleSmart was established in the 2001 to supply all types of weighing scales and laboratory balances at discounted prices. Scalesmart supply a selection of premium weighing scale brands, there are models from manufacturers such as AnD Instruments, Dini Argeo, MWS Ltd, Radwag and Tanita plus many more. You can be sure that any models supplied pass stringent quality tests for useability and durability. After sales support is taken care of by a third division of MWS Ltd. Betterweigh undertake calibration, repair and servicing of all types of weighing scales throughout the UK. Betterweigh support many bluechip clients such as Northern Foods, Premier Foods and PepsiCo. Scalesmart is owned and operated by MWS Ltd who have been manufacturing high end weighing machinery for the UK trade since 1994. MWS Ltd supply a diverse range of high profile customers with standard and bespoke weighing scales manufactured at their factory in Leicester. MWS Ltd has built up an enviable reputation as a prestige weighing scale manufacturer within the UK market place, a reputation which ensures major scale companies continue to use MWS products.

MICRO WEIGHING SOLUTIONS

United Kingdom

MWS gained an enviable name within the industry as a manufacturer of high quality equipment with many large Weighing Scale manufacturers buying the product range to rebadge as their own. To this day MWS still manufacture equipment for the biggest names in the weighing industry, a testament to the quality and innovation of MWS products. Nationwide UKAS Calibration & Service We are an experienced team of Weighing Scale professionals that travel nationwide to carry out maintenance and calibration of all types of weighing products from analytical lab balances through to weighbridges and silos. Our calibration service is traceable to ISO9001 and UKAS ISO17025 standards. We also offer a weight calibration service to ensure your test weight certificates are always current Accreditation’s, Awards & Associations Registered under the ISO9001: 2015 scheme for quality assurance in service, calibration, design and manufacture via the National Measurements Office and also ISO17025 UKAS approved Calibration Laboratory. MWS are also approved for the self verification of trade approved weighing machinery.
PCE INSTRUMENTS

United Kingdom

PCE INSTRUMENTS is a manufacturer and seller of test equipment, control systems, scales and balances as well as laboratory equipment, operating on an international level: Acoustic Noise Dosimeters, Control Systems, Laboratory Technology, Measuring Instruments and Weighing Equipment, Sound level meters ... We mainly sell test meters which are developed, produced and sold under our own label "PCE INSTRUMENTS ®". Test Equipment which is not manufactured by PCE Instruments itself is selected from other top class manufacturers. PCE offers advice during the customer’s selection process, information on how to use the equipment and repair and (re)-calibration services, which is beneficial and convenient for our customers because they get everything they need from one source. The company’s headquarters are in Germany, with offices in Italy, France, Turkey, the Netherlands, Spain, Hong Kong, China, the US, Poland, Bulgaria, Chile and the UK. At PCE INSTRUMENTS we distribute smart products and solutions for technical tasks in industry, research and development.
ITI DIRECT

United Kingdom

ITIUK was incorporated in 1986, but our history dates back to 1867, making us one of the oldest and most experienced instrumentation companies in the world. The knowledge that we have developed over these years allows us the ability to ﬁnd the solution to the most complex applications. This is helped by the fact that we manufacture in-house in Oldham, Gtr. Manchester. We manufacture pressure and temperature instrumentation in-house, but also source a variety of instrumentation through our network of approved vendors - this allows us to oﬀer a complete supply package to our customers. We make Dial Thermometers, Pressure Gauges, Digital Thermometers, Chemical Seals, e-Gauge, Temperature Sensors and other specialist instrumentation. Whilst our core business has been built and developed in the domestic market, ITIUK has a strong focus on developing our international presence. Our trained and experienced mechanical and electrical technicians carry out our ISO 9001: 2015 repair and calibration service at our custom built facility in Oldham, Greater Manchester, this allows us to work quickly.
BRANNAN THERMOMETERS LTD

United Kingdom

BRANNAN THERMOMETERS & INSTRUMENTATION are leading European manufacturers of Thermometers, Pressure Gauges and associated products and have been manufacturing and supplying thermometers, pressure gauges and instrumentation since 1913. Our glass thermometer and pressure gauge manufacturing facility in England is highly mechanised offering high quality glass thermometers and pressure gauges at internationally competitive prices. Complimenting our production facilities, the company provides a calibration service operating its own UKAS accredited laboratory. We supply OEMs, Resellers and End-users in Retail, Scientific and Industrial markets worldwide a vast array of glass thermometer and pressure gauge products. The company has operated a quality management system since 1991 and currently operates within the scope of ISO 9001: 2008. We also have a UKAS accredited calibration laboratory that operates within the scope of ISO 17025: 2005.
FILTON PROCESS CONTROL ENGINEERING

United Kingdom

FILTON is specialised in Industrial Flow Measurement Systems.FILTON can offer the package that best meets your requirements and budget, whether you need a single flowmeter or a complete instrumentation system / turnkey project. We provide flowmeter service, calibration and hire facilities, so we are more than just a supplier: Measuring, Analysing & Controlling Instruments, Manufacture of instruments and appliances for measuring, checking, testing, navigating and other purposes, except industrial process control equipment.
JAMES TECHNICAL SERVICES LTD

United Kingdom

UK based design and manufacture of environmental test chambers. Providing a maintenance and calibration service for our temperature, humidity, combined temperature and humidity, vibration, sand and dust climatic test chambers. Standard range includes bench-top, floor standing and walk-in chambers. We also produce bespoke high accuracy ovens for the oil and gas industry, thermal conditioning chambers for tensile test machines, epoxy curing ovens for aerospace applications and conditioned air supply units for temporary enclosures. Temperature ranges from -80°C to +300°C. Mechanical (compressor) cooling, LN2 and CO2 cooling options as appropriate.
FONDERIA MESTIERI

Italy

Our company offers numerous services in various fields: mechanics, electronics, information technology, mechatronics, optical-measurement, video & multimedia, graphics - web design and scenography. We design, manufacture and trade technical articles and products in plastic and metal, also equipped with electrical and optical parts; equipment and molds for processing plastics and metals; components for energy generation from renewable and non-renewable sources; installation of plants and machinery c / own and subcontract; technical instrumentation calibration activities. We also offer services of design, construction, assembly, installation, maintenance, technical assistance and staging of sets and stage machines for shows and events.

See all products
MWS LTD

United Kingdom

MWS are industrial scale manufacturers who design and build scales at the factory in Leicester, United Kingdom MWS gained an enviable name within the industry as a manufacturer of high quality equipment with many large Weighing Scale manufacturers buying the product range to rebadge as their own. To this day MWS still manufacture equipment for the biggest names in the weighing industry, a testament to the quality and innovation of MWS products. We are an experienced team of Weighing Scale professionals that travel nationwide to carry out maintenance and calibration of all types of weighing products from analytical lab balances through to weighbridges and silos. Our calibration service is traceable to ISO9001 and UKAS ISO17025 standards. We also offer a weight calibration service to ensure your test weight certificates are always current Registered under the ISO9001: 2015 scheme for quality assurance in service, calibration, design and manufacture via the National Measurements Office and also ISO17025 UKAS approved Calibration Laboratory. MWS are also approved for the self verification of trade approved weighing machinery.
TEKSAN TEKNOLOJIK ÖLÇÜM SISTEMLERI SAN. VE TIC. A.Ş.

Turkey

With manufacturing and operation facility in İstanbul, TEKSAN is a market leader in water metering industry of Turkey. TEKSAN brand is rooted in 55 years of water metering experience - and focused squarely on the future. TEKSAN delivers reliable, flexible and proven solutions that provide advance measuring equipments, test benches and calibration services along with component production for other water meter manufacturing companies. From its origin of more than a century ago to today's latest products, TEKSAN has maintained a wide range of products from DN15 to DN800 sizes to the international and domestic partners.
LIBBY

United Kingdom

SMTXtra Repair Centres, located in the UK and USA, specialise in Fuji Head repair service and also offer SMT feeder calibration and repair services for Panasonic, Fuji, Yamaha and Juki feeders. Contact us for more information.