pump Italy

... specifications ensures a perfect fit and efficient operation, enhancing the reliability and safety of the systems in which they are used. Brass offers exceptional resistance to corrosion and the ability to be machined with precision, making pump bodies an ideal choice for harsh environments. Due to their robustness and versatility, customized brass pump bodies represent a reliable solution for any project requiring high-quality components and lasting performance. Investing in customized brass pump bodies means choosing quality, reliability, and innovation for your industrial applications.

...The valve isolates pumps from the system during pumps starting and stopping to protect pipe lines and pumps itself. The valve is equipped with a control solenoid valve that is switched on at pump starting and is able to fulfill pipe line gradually, reducing pressure rising peaks and allowing soft starting of the pump with closed outlet. The valve controls pump stopping as well, gradually closing before sending a closing signal to the pump. In case of casual pump stop, the valve acts also as an automatic check valve, preventing backflow over the impeller.

... possible to request a modification to the gas inlet system so as to be able to pack two bags per bar by entering the same quantity of gas for each package. Sealing bars length:mm 400 Chamber dimensions:mm 320x420x70/130(H) Vacuum pump:20 m³/h Working cycle:about 30 sec...

...Peripheral volumetric pumps capable of developing high pressures relative to modest flow rates and powers. - Brass impeller - Mechanical seal in ceramic graphite - Closed self-ventilated motor - Class F insulation - Single-phase power supply 230V 50Hz with thermal protection and permanently installed capacitor - Three-phase power supply 230/400 V 50Hz with user-provided protection - Maximum water temperature: 90°C Pump body: cast iron Shaft: stainless steel AISI 416 Protection: IP44 Maximum pressure: 6-8-9 bar...

...Set of 3 vacuum splints: hand, leg and arm Suitable for paediatric use Absolute, fast and painless immobilisation of fractured limbs (even exposed ones) High resistant washable material Compact suction plastic valve with external ¼ on/off. Ensuring a perfect immobilisation but do not compress, and allow physiological blood circulation 100% X-ray transparent (no metal parts included) Complete with transport bag and mini-pump Hand splint dimensions: about 50,5x33 cm Arm splint dimensions: about 47x75 cm Leg splint dimensions: about 64x92 cm Dimensioni of set: about 54x24x44(h) cm Weight: about 4 Kg...

...Pump plastic base, central steel tube SKU:Art Pump/Plasti/White L500 Size:35 x 35 cm h. 25 cm Weight:1,5 kg...

...Factory new triplex pump, Triplex 140 model Max flow rate 140 lt / 1 ' Pressure up to 50 bar Drive by hydraulic motor Accessories safety valve pressure gauge with pressure gauge suction pipe Producer:Project Template:Triplex 140 Condition:New...

...1 LEVETTA 450x460x450 2.5 L 29.5 Kg 1400 W 220-240 Vac 1N 50-60 Hz Manual portion control lever Bodywork all stainless steel or with painted iron – stainless steel water / steam wand Water tank capacity 3 L Possibility to be used with tank or be connected directly to a water supply Warning lack of water in the tank or boiler water level Thermosiphon system – volumetric pump with balanced bypass...

...The Nuova Slot Faberè coffee machine, produced in Italy and backed by a 2-year warranty, features all the characteristics of a professional espresso machine with a pump dispensing system and temperature stabilizer, allowing you to enjoy bar-quality espresso at home or in the office. - Stainless steel mechanism - Aluminum thermoblock - Plastic portafilter for home use - CE certification POWER SUPPLY: 230V 50 HZ POWER CONSUMPTION: 500 W THERMOSTAT: 95° – 98° SAFETY THERMOSTAT: 145° RM...

For over 50 years in the market, thanks to the experience gained and the trust of dealers, it is able to present itself in the market with a range of machines for soil processing, mowing fields, and cutting lawns. In our daily work, we passionately apply our skills and the expertise we have built over the years, while keeping our eyes on the future. Since its foundation, the company has always aim...

...Submersible pumps with agitator for charged and abrasive mixtures Main features Pump provided of agitator to stir things up High abrasion resistance Low rotation speed Able to handle up to 70% per weight material density Accessories: High depth kit Algae cutting blade Humidity and temperature sensor Jet Ring system...

The company LELI from Milan has been specializing in the distribution of motion transmission components for over 60 years and provides assistance and maintenance services for assembly, control, and diagnostics. The company has always been known for its professionalism, expertise, efficiency, and utmost attention to customer issues. A tradition that is renewed every day in the search for the most a...

... the high-pressure hose supplied with the pump to the special injector, which is suitably installed in the masonry. Immerse the suction pipe supplied with the pump (reinforced plastic pipe) in the container (bucket, bottle, etc. ) containing the resin to be injected. Insert the pressure relieving tube (transparent plastic tube) in the same container. Start the injection operations, by pumping the...

... of rinse water or sanitizing solution occurs only when the bottle is present, thanks to a contact micro-switch. To use a circulating solution, a kit with a recovery tray, pump, and connecting pipes is available. The machine is equipped with a filter for the rinse solution with a microfiltration cartridge of 0.45 microns. It is also available in a 20-position version and a blower-only mode. Production: 700 pieces per hour.

...Submersible pumps compliant with NEMA standards, fully made of stainless steel, suitable for pumping clean water in 6" wells, water supply systems in residential and industrial settings, pressurization systems, and irrigation. Flow rates: 0 – 1333 lt/min Head: 0 – 662 m Power: 4 – 45 kW All pump components are made of AISI 304 stainless steel (AISI 316L available upon request). The maximum diameter of the pump is 147 mm. Flow rates: 0 – 1333 lt/min Head: 0 – 662 m Power: 4 – 45 kW...

... the option of either in built fixing nuts or external fixing without nuts for F series. The pump body is pressforged and has integral non welded Tri clamp or DIN118643 connections. Elimination of slots ensures easy C.I.P. cleaning with no cleaning fluid retention. F series (without nuts on rotors) has obtained, after Cleanability Tests at München Engineering University, EHEDG’S certification (European Hygienic Engineering & Design Group) show that this kind of pump meets all requirement for hygienic design and is to be classified as “easy cleanable”.

...The best solution for tertiary filtration: high solid removal efficiency, minimal water and energy consumption. The PPC series - PPC VM (VM = metal tank) was developed for medium to large potential plants. For the filters in this range, the washing of the fabrics is carried out with only two pumps (one of which is a backup pump) that serve all the discs. The selection of the discs for...

...Complete ivory-colored cushions Anchor and 50 m chain. Tow rings Autoclave with shower system Horn Retractable mooring cleat Electric winch Compass Self-draining system Double bed Outdoor sink Retractable awning toilet Tinted windshield Automatic bilge pump Length m: 9.95 Width m: 3.54 Weight: 2,228 Kg CE Certification: B...

... ensured by the touch-screen panel, also found on other Frigofluid temperature controllers. Models with an increased pump are also available for users characterized by high pressure drops. Temperature Range:up to 90°C...

...Errecinque designs and manufactures a significant number of variants of connecting pipes for the SCR system, such as the connection between the sender unit (tank), urea pump, water circuit valve, and the corresponding connection to the urea injector. In addition to the typical versions equipped with water pipes to thaw the urea, since 2015, the range has expanded to include electrically heated...

...DIAMANT check valves can be used in all systems where there is a need to prevent the reverse flow of fluid. They are particularly suitable for installation in boilers on the discharge pipes of circulation pumps to ensure that the flow occurs in one direction only, thus preventing backflow. They are also necessary to prevent the system from draining in the event of a pump shutdown. DIAMANT check...

...Premixed radiant screed, grain size 3 mm, wet earth type, fiber-reinforced with amorphous stainless steel fibers, featuring high thermal conductivity, based on hydraulic binders, with compensated shrinkage for quick drying and controlled curing. It is ideal for manual or machine application, including pressure pump, for subfloor screeds to be applied directly on any stable internal surface that...

... lt boiler) and 19.5 kW (16 lt boiler) power pump with VITON components for mains hot water> 80 ° C two steam powers with L / selector H 1.3 bar pressure for barriques and wooden barrels 6 bar at 165 ° C for steel tanks and various applications soft wheels for nonplanar floors ease of handling inside the cellar...

...Lightweight 10.2 to 10.6 kg (under 23 pounds)The lowest profile: only 14cm (5.5in)Scrub and dry in both directionselectronic control for automatic pump shut-offCarpet cleaner (LW30)Injection / extractionWindow cleanerMinimum consumption of water and detergents...

...The Airless method guarantees a high-performance painting without fog formation. Thanks to the high operating pressure and top-tier flow rates, this model allows for truly impressive execution speed. A strong point of the Airless Testarossa series pump model Superventimila is its dual head, which offers the possibility to apply two different products simultaneously. However, it is always possible...

...A PRACTICAL AND MANEUVERABLE AIRLESS PUMP FOR LIGHT PRODUCTS! Technical specifications: - CE-compliant electric motor with motor protection - Power: Single-phase kW 0.9 V.230/50 Hz - Noise level according to CE standards (75 dB) - Maximum pressure: 220 Bar - Free delivery: 4 l/min - Maximum spray nozzle diameter: 0.021" - Head: 30 m. When it comes to small Airless pumps, our model Testarossa...

...It is distinguished by the filtering group contained within a transparent Plexiglass cylinder and by the pump group whose components are made from rods and sheets of polypropylene and PVC, excluding molded components. This results in greater robustness and durability over time. The CESE series includes models characterized by actual flow rates ranging from 2,000 l/h to 5,000 l/h and free discharge flow rates from 4,700 l/h to 9,200 l/h.

...COMET pump dedicated especially to those who use herbicides: impervious over time to the products. 3 Pistons Flow rate 71 lt/min Maximum pressure 20.0 bar Power absorbed 0.4 HP at 550 RPM For herbicide treatments and liquid fertilization in solution Applications on mounted and trailer sprayers Parts in contact with the liquid made of plastic materials resistant to the chemicals used in...

...The 100 kW heat pump chiller offers efficient cooling with the added benefit of heating, providing maximum flexibility and a compact footprint. The 100 kW heat pump chiller uses R410 refrigerant. Portable frame with ISO 4-point lifting devices and fork pockets for forklift handling. Unit base and frame made of heavy-duty steel. Fully compliant design with CE regulations. Ground and three-phase...

...Complete processing of pump casing for jet grouting...