raw steel Italy

...ART. 1200 WELDABLE FLAT HINGES IN RAW STEEL REMOVABLE PIN Packaging: 10 Size (mm): 80 x 55 x 2.8...

...Raw Iron - Nickel Plated - Zinc Plated - Stainless Steel Aisi 304 - BOLTS...

... careful selection of raw materials and the adoption of innovative production processes are the primary guarantee of quality and long-term reliability of our product. We conduct various tests for strength and durability, as well as quality control tests during the different stages of processing. Upon request, we can issue the relevant certificates in compliance with national and international regulations.

... connections provided. They can be installed on both inlet and outlet connections, offering maximum flexibility in the configuration of your filtration system. Stainless steel pre-filters and industrial applications Pre-filters are widely used in various industries. From the textile industry, for example to filter colours, to the ceramic industry to retain the grains of raw materials. In the chemical and...

... organic raw materials < 1% - practically nil VOC emissions during installation; once hardened, nil VOC emissions. - containing a fraction > 5% of sub-products from the production industry 100% recyclable at end of life. For seismic adaptation with absorption and transfer of pressure or traction during events with elevated dynamic forces (seismic, impacts, deflagration); - for structural reinforcing...

...This kind of mixer discharges the product on two or more trolleys by a tank tilting, allowing the complete recovery of raw material and a quick and easy washing of the tank itself. The mixing shaft system with intersecting paddles allows as well a rapid and safe working without smashing the product.

... enhance durability. The front part of the stair tread is painted yellow to highlight the tread and improve stair safety. They are produced in standard-sized bars but can also be supplied cut to size according to the dimensions of the steps to be covered. The stair treads can be easily fixed to existing steps with through screws, dowels, or adhesive strips. Thickness: mm 4 Color: Grey RAL 7004 (yellow footrest) Raw materials: Polyester resin Standard element Length: mm 3660 Standard element Width: mm 345 Standard element Height: mm 40 Weight kg/m2: 2 Surface: With quartz...

... filtration of civil and industrial wastewater, clarification of cooling water in the metallurgical industry, algae removal, pretreatment for membrane ultrafiltration plants, pretreatment for ozonation plants, finishing treatment with activated carbon. - Low initial and operating costs of the plant - High efficiency and reliability for the removal of suspended solids, including colloidal ones - Exclusive backwashing system that uses raw water instead of filtered water - External sand recirculation system...

...Our company employs the most modern machining techniques for medium-heavy mechanical carpentry works in Brescia, carrying out precision work for companies in the steel and oil sectors. You can turn to Scaroni Domenico & C. for CNC machining services for third parties, knowing that you are relying on a professional, serious, and punctual service. We produce single pieces and small batches, personally managing every production phase: from raw material selection to product delivery, every step of the process is carefully handled by an experienced and highly qualified team.

... p is multiple and at the customer's discretion, as for the types of meshes a x b. AVAILABLE SUPPORTING AND INCLINED BARS From plates 20×2 mm to plates 100×5 mm. EDGING Generally obtained using plates of 35×5 mm or 50×5 mm with holes to allow for quicker assembly. INCLINATION OF BARS: 30° or 45°. MATERIALS Galvanized iron, raw or painted, stainless steel, aluminum, or corten steel. INCLINATION OF BARS: 30° or 45°.

...Mega snc is a Brescia-based company specializing in mechanical processing of metals using transfer machines and machining centers. The production cycle can start from special profiles, turned parts, or hot stamped, die-cast, and forged components. We perform operations such as drilling, threading, milling, and tapping on various metals, including brass, steel, bronze, copper, aluminum, and its...

...In the steel industry, the bearings used operate under extreme conditions, from the extraction and handling of raw materials to casting. They are subjected to high temperatures, immersed in dusty environments, and experience highly variable thermal cycles. Techno Total Solutions, thanks to its experience and knowledge of the steel sector, is able to design long-lasting, durable, and reliable...

... an open long side, with 2 to 5 tiers, having shelves of 87x52 and 112x52 cm, or closed, with 2 and 3 tiers, having shelves of 87x47 and 112x47 cm. They are made of durable and resistant galvanized steel. Product Sheet Open Shelf 87x52 CL_BC_C2_K_02 cm87x52x80 CL_BC_C3_K_02 cm87x52x112 CL_BC_C4_K_02 cm87x52x144 Shelf 112x52 CL_BN_C2_K_02 cm112x52x80 CL_BN_C3_K_02 cm112x52x112 CL_BN_C4_K_02...

...The silencers from Sinterfiltri are made with medium-grain powders sintered onto copper-plated steel or brass bases. They are certified by the laboratory of the Polytechnic University of Turin. Quality is ensured through systematic control of both raw materials and all processing stages, with particular attention given to inspections of the finished product.

...The installation for recycling used tires allows for the recovery of secondary raw materials of various sizes while separating other components such as steel and textile fibers. The facility is equipped with a multiphase cleaning system that ensures the complete separation of textile fibers and the production of a granulated product that is 99% pure. The suction system includes filters and fire...

... for direct collaboration between operators, machines, and testing, as well as real-time data collection on production (pieces completed, processing times, etc.) to monitor productivity. Traceability --> integrated traceability in batches: raw materials, production phases, treatments, finished products. Testing --> Parts are systematically checked during all individual phases with instruments directly connected to the company software (MRP), automatically saving measurement data and avoiding human error.

...PRODUCT SHEET PRODUCT Organic Extra Virgin Olive Oil PRODUCTION YEAR 100% 2017-2018 COUNTRY Italy REGION Calabria TERRITORY Hills of the Calabrian Presila ENVIRONMENT Unpolluted and pure CULTIVATION Intercropping with natural substances: grass, fava beans (cover crop) HARVEST Mechanical shaker with umbrella EXTRACTION Cold extraction (less than 27°) within 24 hours of harvesting STORAGE Stainless steel tanks CERTIFICATION Bio CERTIFICATION NOP: USDA 100% Organic CULTIVAR Monocultivar "Carolea" USE Raw on salads, legumes, and soups First courses Meats……and fish Mediterranean Diet...

...The increasing focus on the environment and the reduction of raw material consumption has led to the design of high-tech recycling plants with a low environmental impact. Officine Conterno is capable of creating complete systems for the recycling and recovery of inert waste of various types, such as: - DEMOLITION WASTE - BRICK PROCESSING SCRAPS - STEEL AND FOUNDRY SLAG - INCOMBUSTIBLE ASHES FROM...

... plastic. The extrusion phase, accomplished by means of low-temperature diabatic machines, represents a technological innovation which permits to obtain an extruded section with excellent technical, aesthetical and lasting standards. Plastic waste is turned into sections of various shapes and dimensions and is structured, when needed, with steel reinforcements and processed. The potentials of this brand-new material with an unlimited duration without maintenance, have been used for TECNOWALL recycled plastic panels, that have been designed and commissioned for their triple function of environment...

...Precisinox is a company specialized in the trade of stainless steel items. The firm, located in Ciserano, in the province of Bergamo, offers a wide selection of products such as thin stainless steel strips, tempered stainless steel strips, raw strips, carbon strips, and wire for springs. It also carries out sheet metal shearing, cutting, and edging work both for its own account and for third parties. Precisinox is a specialized dealer of Alleima/Sandvik.

...<p>Metalpress: 50 years of experience in the processing and cold stamping of sheet metal and steel. It performs deep drawing and is particularly specialized in the production of D-type and E-type domes. It has mechanical and hydraulic presses; primarily works with carbon steel and stainless steel. Certification UNI EN ISO 9001:2015, for complete monitoring of the production process: from the raw...

... produce and develop high-quality products in accordance with Italian and European regulations in the sector. With the advancement of gas/diesel thermal units, and the rise of increasingly efficient stoves and fireplaces using both wood and pellets, the company has adapted over time, designing and developing new flue systems using raw materials other than stainless steel, such as aluminum, copper, iron, and PPS plastic.

... finished product, is carried out in the facility with over 40 special machines, designed in-house, and two furnace lines for steel treatment that allow for optimal standard structures 45H, as well as other special requests. Arser is located at Via Bruno Camellini, 5/a - Zola Predosa.

... safety and cost-effectiveness, ensuring the best performance even in the most critical uses. Our raw materials, highly selected, come from the best metal refineries and are all rigorously controlled for mechanical and chemical properties. In addition to standard production, Metal Leghe also offers specialized processing (one-off pieces) upon specific customer request. The group is sensitive to the evolution of the steel mechanical sector and participates as a member of Assofond and Assomet.

... allow us to offer our customers attentive and punctual service, making deliveries thanks to a widespread logistics organization and an efficient fleet of vehicles.</p><p>Our headquarters is in Tuscany, but we operate efficiently even beyond our reference region.</p><p>We also have important decentralized storage points in Arzignano (VI), Mantova (MN), and Santa Croce sull'Arno (PI).</p><p>For customers who need it, stainless steel storage tanks are available for better inventory management. In our facilities, liquids are managed with a high level of safety.</p>...

The spazzolificio Bustese, located at Via Industria, 30 in Arconate (MI), has been specializing in the production of industrial brushes for over 50 years; it manufactures a wide range of products entirely in its own facility: from the assembly of raw materials in its workshop to the execution and completion in the tufting departments. This methodology, combined with the experience gained, allows...

...Dentis Recycling Italy srl specializes in the mechanical recycling of plastic in Sant'Albano Stura, province of Cuneo, at Via Mondovì, 15. Founded in 1987, Dentis Recycling Italy S.r.L is focused on recovering PET from separate collection or processing waste. The PET to be recycled, processed within the Dentis facility, undergoes all the necessary steps to become secondary raw material. The...

... mold construction. The company's very flexible structure allows for the management of changes and evolutions, always studying new tailor-made solutions for the client. The mold processing is carried out with high-quality raw materials (aluminum or steel) using the latest technology machines and paying particular attention to finishing, ensuring impeccable results with very short delivery times. FAEPROJECT is one of the few mold manufacturing companies that has a well-equipped testing department capable of testing all the various types of molds it produces.

...electronics, household appliances, faucets and industrial valves, windows and locking systems). Other elements that enhance our company profile include the use of raw materials with high-quality standards (such as carbon steels, alloy steels, stainless steel, copper, phosphor bronze, beryllium copper), meticulous control of the production and post-production supply chain, and collaboration with exclusive partners for heat and surface treatments (including a patented hydrogen-free galvanizing process). The company is certified ISO 9001-2015, ISO 14001:2015, and is registered with EMAS.

For over 25 years, we have been producing aluminum shutters in a wide range of models, among which the minipack stands out, a modern design shutter with reduced packing that allows for the closure of even large surfaces. The quality of our products is guaranteed by the exclusive use of aluminum and stainless steel screws for construction; furthermore, for a better finish, most of our shutters are built raw and painted afterwards. Particularly suitable for renovations, they can be made in versions with fixed slats, shutters, adjustable, door-style, curved, and many others.