working lifts Germany

... materials and the centimetre-level precision setting of the operating height always ensures the most ergonomically favourable position during any works. Both for transportation and for assembly/disassembly the new GEDA suspended working platform Standard benefits greatly from the low self-weight of the platform and the outrigger. Its ease of handling – without losable small parts – also translates into huge time and cost savings. Cargo:Persons and material Traction force:650 kp Lifting speed:8 m/min Power supply:1.4 kW / 400 V / 50 Hz / 16 A Platform length:3 m / 6 m Control voltage:48 VAC...

... grippers is the intrinsically safe spindle system, which makes the use of additional safety systems unnecessary. nationwide, factory-owned service Working under the lifted vehicle is also permitted during lifting and lowering operations. This is an advantage that our customers appreciate, for example, when installing and removing components, as the vehicle lifting height can be adjusted with millimeter precision while maintaining direct visual contact with the work area.

...With EdmoLift's level lifts, items can be effortlessly raised to a working height of 1,100 mm.

...With working heights of up to 28 m and lateral reaches of up to 19 m, you can access even hard-to-reach, intricate job sites, even over greater distances. We offer a solid selection of articulated boom lifts focusing on electric and hybrid drives, suitable for both indoor and outdoor use. With working heights of up to 28 m and lateral reaches of up to 19 m, you can access even hard-to-reach, intricate job sites, even over greater distances. Some machines are equipped with an additional so-called 3D joint, which provides you with even more flexibility and precision for your work at height.

...The Compact 10 DX scissor lift is part of the diesel scissor lift range, designed for working at height. - Hydraulic differential lock for off-road operation - Fully proportional control - Increased safety through platform overload shutdown - Robust, reliable, and easy to maintain - The tight turning radius allows for excellent maneuverability...

...simply attached at the bottom of the scaffold, with only the lightweight swivel arm mounted at the desired height on the scaffold; the maximum working height is 40 m, and with a higher set winch, up to 76 m. • Load capacity: 60/120/150/200/250 kg • Lifting speed: various • Maximum lifting height: 25 / 50 40 / 76 m • Rope length: 26 / 51 / 81 m • Power: various • Voltage: 230V, 50Hz...

...The 4-column lifts from Stertil Koni are designed with an ultra-low drive-on height, making them suitable for a variety of vehicle types and vehicles with low clearance profiles. Optimal working comfort and ergonomics: The 4-column lift from Stertil Koni is raised vertically without overhang, providing ample workspace for the mechanic. Drive surfaces are available in a variety of lengths to...

...The traction sheave hoist Gtrac admitted for the personal transport the costly scaffolding of a lift shaft is to be eliminated suitably. The lifting gear technology on the cabin roof is installed by tailormade adaptation, so that this can be used as a working platform. About an upper and lower pulley the resigning traction rope is led without ground touch and is free of soiling. As a safety barrier serves as a rule security brake belonging to lift. Security facilities like final disconnection, Overlooking and a supervision whether rope to end is, guarantees a reliable and sure function.

...Cost-effective alternative - Stable tubular construction - Non-slip working platform - Approved for 2 persons - Anti-slip safety sleeves - Galvanized toolbox - Technical inspection "TÜV" according to BGV...

...Versatile working with GEDA inclined lifts. Features: -Easy to transport, even in a car or on a trailer. -Assembly without tools -Easily operated even by an untrained helper -230 V alternating current connection is sufficient -Adaptable for any construction site and any transport situation Basic unit consisting of: -Electric winch 230 Volt / 50 Hz with 43 m rope ( 6 mm) -21 m limit...

... Conveyor Curves • Gravity Roller Conveyors • Driven Roller Conveyors Chain Conveyors: • Chain Conveyors • Traction Lifts Product transportation is an essential element of in-plant logistics. Exact and precise handling is a prerequisite for optimal material flow. Belt conveyors are ideal for transporting light to moderately heavy products. Roller conveyors can be adapted to a variety of space...

... exit rollers Lifts up to max. height: 13 Overall length: 1,550 mm Minimum working aisle width: 1,835 mm Turning radius: 1,367 mm Handle: Ergonomic shape Weight: 63 kg Surface: High-quality powder-coated Color of forks / handle: light green / black...

... accepts even dirty surfaces or warm sheets. Your Benefits: . Lifts sheets or steel parts weighing up to 25 kg. . Parts can be easily released via the lever. . Ergonomically shaped handle for fatigue-free working. Product Features to Your Advantage: 1. Protects your surfaces. 2. Leaves no technically relevant residual magnetism. 3. Is practically maintenance-free.

...Safe Working with Intelligent Technology The GX series, available in various versions, is a useful and intelligent work partner that operates electrically and lifts. Easy to use, with an integrated charger that allows for flexible battery charging at any outlet in the work area. Thanks to its excellent residual lifting capacity of 100%, the GX forklifts are capable of lifting heavy loads to the maximum height.

... (standard use) as well as for dome lights and roof lights (use for vertical mounting) Specifications: Mains voltage: 230 V ~ 50 Hz Power consumption : 0,12 A Power consumed with load: 15 W Thrust and traction : 200 N Idling speed: 10 mm/s Idle stroke duration (360 mm): 36 s Length of working stroke: 240 / 360 mm Minimum window height (distance between actuator to window opening band): - with top-hung assembly 250 / 360 mm - with pivot-hung assembly 500 / 900 mm - with dome 300 / 400 mm Limit switch: electronic When opening service S 2: 4 min Operating temperature: -5°C/23°F +...

...The BalanceStand with height-adjustable telescopic mast is the optimal support system when a high degree of flexibility is required for the use of the Balance Lifts. The BalanceStand can be transported to the desired location using a pallet truck or forklift. By splitting the boom, a larger working area is created. The maximum load capacity is 100 kg with a 2 m boom and 65 kg with a 3 m boom. The BalanceStand is also available for floor, wall, or column mounting.

... reached faster - the technician can start working immediately - TÜV and EU type examination certificate - CE certification To optimally adapt the personnel lift to the conditions in the wind turbine, various lift sizes and guiding systems are available. There are lifts approved for one or two persons. The lift can be guided along the existing ladder or by ropes.

...Especially well suited for: Electric drive - indoor use Diesel drive - outdoor use All-wheel drive - rough terrain Ideal for applications... ...in tight spaces ...when overcoming obstacles ...in narrow passages ...with high basket loads max. working height 43.00 m max. lateral reach 19.80 m max. load capacity 450 kg ...

...The SB 76 E scissor lifts are specifically designed for tight assembly situations. With a device width of 76 cm, they can easily pass through doorways. A load capacity of 230 kg on the platform is more than sufficient given the dimensions. The platform can extend to a length of 2.65 m. Our electric scissor lifts are all equipped with non-marking tires. Working height: 7.76 m Platform height...

... liquid handling systems, measurement technology and sensors, lifts, and other ystral modular components. Performance: 4 kW Speed: Up to 12,000 min-1 Frequency converter Shear rate: Up to 60 m/s Voltage: 230 / 400 V, 50 Hz Material: Stainless steel 1.4404 (AISI 316 L) Powder suction capacity: Up to 15 kg/min Batch size: Range from 5 l to 200 l...

...external dimensions in working position: Diameter: 1600 mm, Height: 2425 mm, Lifting height: 15 m, Lifting speed: 0.2 m/sec., Drive: manual two-crank operation, Load capacity: 1,500 N (150 kg), Weight of drive unit: 87 kg, Weight of tripod: 30.5 kg. For the second device of type 6-1600 H, the "H" must be replaced with an "S". Test certificate: Construction 98013 Tripod: Width = 300 mm, Height = 1,500 mm, Depth = 300 mm, Drive unit: Width = 350 mm, Length = 1,000 mm, Height = 300 mm.

...Genie® IWP™ Super Series • Two chassis options available (standard and wide) • Various platform and drive options to choose from • Quick to set up, easy to operate • No outriggers required • The patented aluminum mast system and a sturdy steel chassis provide high stability. • Automatic level monitoring • Integrated leveling screws • Emergency descent to lower the platform • 60 cm additional reach with the optional platform extension. Drive Electric (Battery) or AC: 12V DC or 230/50-60 Hz AC worldwide model Working height*: 9.44 m Load capacity: 159 kg...

...The Haulotte scissor lift, with its platform working height ranging from 8 m to 14 m, is used in various fields: construction, cleaning, events...

... value for your company together with you, leveraging our experience and expertise as logistics specialists - differentiation and value should be at the core of our efforts. We look forward to working with you!

... solution for your company. We are happy to assist you in selecting the right equipment. GILTEC Our company is particularly characterized by its reliability and flexibility. All employees of the company live their profession with the utmost conviction. We are confident that with passion and conviction, even mountains can be moved. We will show you that you have found an ideal contact person in all matters with us. The GILTEC team looks forward to working with you!

...{"Aerial Work Platforms":"For rent: We offer telescopic aerial work platforms with a working height of nearly 40 meters, as well as scissor lifts up to 21 meters. We are happy to advise you with our experience in renting aerial work platforms!","Autocranes":"Our crane fleet: The right solution for every challenge. Successfully deployed in a variety of construction and assembly tasks, even the...

Kuhnle takes you higher. Easier. Safer. More comfortable. We rent aerial work platforms and lifts for every need. And we are here for you when you need us: with plenty of service and a team that makes your work easier. With us, you will always find the right platform for your job: from truck-mounted platforms to scissor lifts, from mini cranes to crawler lifts, and telescopic forklifts, reaching working heights of over 100 meters. And if we don’t have it in our yard, we will source it for you through our professional network.

... is the largest provider of lift systems and daily living aids in the eastern part of Germany. For over 15 years, we have been working to make daily life easier for people with limited physical mobility. Our goal is to provide barrier-free access to all types of buildings. Whether in the private, public, or municipal sector - with our variety of lift systems, we find the most suitable solution for...

... lifts from 16 m to 33 m. Scissor lifts, both electric and diesel, ranging from 6.6 m to 22.5 m are also part of our portfolio. Furthermore, we offer telescopic lifts and articulated telescopic lifts with working heights from 11 m to 43 m, powered by diesel or battery. Due to our proximity to the aviation industry, we have equipped our machinery with electric devices featuring low-wear tires up...

... K 28-34 weighs only 7.5 tons - Can be used in paved driveways - Low ground pressure - Large outreach of up to 46 m - Equipped with a hanging basket for working in hard-to-reach places, e.g., behind the house - Easy operation via remote control - Quick setup time - The crane operator can assist through the flexible remote control - Small hook block diameter of 10 cm - No pulley The application...