wire strands Germany

...• For stripping single, multi, and fine wire conductors with standard insulation • Featuring a V-shaped cutting edge for wires and strands up to a maximum diameter of 5 mm or 10 mm² cross-section • Equipped with an adjustment screw for easy setting to the desired wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component covers • SoftGripp handles...

...Multi-wire springs are made from wire strands with a diverse strand structure and are used as compression, torsion, or form springs. Our multi-wire springs are technically advanced products and are primarily employed when single-wire springs made from round or profile wire fail due to high impact loads and high impact frequencies, or cannot ensure operational safety. The strand structure results...

...We offer you a comprehensive range of steel wire ropes and strands in various diameters and constructions. Our steel wire ropes and strands are available with and without coating in materials such as stainless steel, galvanized steel, and special alloys. S T A I N L E S S S T E E L R O P E S • Steel wire strand, material 1.4401 Construction 1 x 7 Diameter range: 0.09 mm - 0.75 mm • Steel...

... nickel, titanium, and copper alloys. We manufacture cold-wound springs up to a wire diameter of approximately 18 mm, and hot-wound springs for larger diameters. Our maximum rod diameter for hot forming is 65 mm. Additional processes such as heat treatment, shot peening, and pre-setting are tailored to your individual requirements. We also offer various surface treatments to improve corrosion resistance or for the desired finish.

... round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size...

...In order to meet the demands for robustness and efficient heat output, we have embroidered the heating element on a glass mesh fabric carrier material. Between the meandering arrangement of the heating strands, we integrate a recess for the temperature switch in the CAD layout. In addition, a second wire is laid concurrently as a PTC thermistor for the electrical connection of the safety switch...

...A single strand is an electrical conductor made up of many small copper wires, which makes the conductor flexible and bendable. It is usually encased in an insulating sheath. The strands are used in places where frequent movement or vibration occurs. A simple solid wire conductor would break due to its lack of flexibility. Therefore, single strands are commonly used in cars or airplanes...

... externally as a retrofit kit. Special features Precise high-speed, crimp force analysis For wire cross-sections from 0.14mm2 – 6 mm² (AWG 26 – 10) Integrated SPC (Static Process Control) with online option Absolute power measurement in Newton [N] TFT-graphic-colour-display with touchscreen Storing up to 50 different programs and parameters Quality assurance through documentation of each crimp Recognize the following crimp faults Missing strands Improper wire gauge Missing crimp contact Inadequate stripping Improper crimp depth...

...The HWWM-350 is designed for the continuous winding of heating wire strands. The unique feature of this machine is the interaction between very large spools and very thin material, achieved through powered spool stations. The carrier material is wound with 2 heating wires without crossings and at a constant pitch. All parameters are freely programmable and retrievable. Processes, winding devices...

...We manufacture spring strands according to your individual specifications and requirements. For more information, please visit our homepage. Wire diameter: 0.05 mm - 0.60 mm Spring diameter: 0.25 mm - 8.00 mm Length: up to approx. 6 m Materials: e.g. stainless steel, PTFE coatings, gold-plated tungsten, platinum...

...For over 70 years, we have been producing STRANDS, ROPE, and CORD, supplying manufacturers across various industries and products worldwide. This is just a selection of our standard delivery program. For additional constructions, materials, and diameters, you can submit your inquiry here. We are flexible and are happy to assist you in finding solutions for individual challenges - just ask us!

...TEX-2x24F-Cuvs | 10 m - Teflon Length:10 m Conductor:strand, Cuvs, AWG 24F, 2 x 0.22 mm² (19 x 0.127 mm) Conductor insulation:PTFE Teflon Conductor guide:individual conductors open strands Operating temperature:-190 °C to +260 °C Outer dimension:approx. 2.2 mm round Core colour:red, white...

... constantly changes along the entire length of the strand. The construction of a bundle strand is derived from the required cross-section and the resulting resistance of an electrical conductor. Cross-sections with the same resistance value can be realized using different wire diameters. Due to their good efficiency, bundle strands are versatile in use in cable and wire manufacturing. Copper: Cu-ETP1 (Cu ≥ 99.90 weight%, Oxygen max. 0.040) Oxygen-free copper: Cu-OF1 (Cu 99.95 weight%)...

...High-flex. Copper strands are crimped at the connection ends with cable lugs under high pressure in a die. Strands made of E-Cu single wires with a diameter of 0.1 mm, cable lugs made of SF-CU tube, annealed. Standard version drilled, other versions available upon request. Tinned strands, tinned or silver-plated cable lugs, heat shrink tubing covers, or custom modifications available upon request.

...), 1.4310 (AISI 301), 1.4401 (AISI 316), 1.4404 (AISI 316L) and 1.4441 (AISI 316LVM), all other cabling materials authorised for use can be supplied coated and un-coated. Applications: - Guide cables e.g. for stomach tubes - Hollow cables - Strands for Temporary Myocardial Pacing Wires (monopolar, bipolar and quadripolar) - Surgial cutting strand for example for sternal closure - Strands for vein eraser - Surgical cutting strands - Wire and cables for endoscopic applications - Wire and cables for orthopaedic applications...

... the power of 9 Ohms Inner core: UPE, smooth, electrically conductive Outer cover: EPDM, black, fabric-patterned, abrasion-resistant, weather-resistant Reinforcement: with steel wire spiral and copper strands Note: For chemical hoses, please check/inquire about compatibility with your media.

...The Metzner AM 1000 is a sensation among the tabletop units. The automatic cutting and stripping machine processes cables, strands and wires up to 9 mm diameter and 6mm² cable cross-section with a special cutting and pull-off force (optional 10 mm², depending on material). The presettings are conveniently made via the modern 12" touch panel, where the operator can define all processes. Thanks...

...Meter strands in stock, outer diameters from 1.5 mm to 90.0 mm, wire thicknesses from 0.15 mm to 10.0 mm. Ends untreated. Spring steel according to DIN EN 10270-1 SH or DH. German production, no imports.

... for your application. Tension spring strands can be used as kink protection or to shield hoses or cables from mechanical stress. The wire diameter range for our compression springs is from 0.18 mm to 2.00 mm for custom manufacturing, small series, and large series production, and from 0.18 mm to 10.00 mm for custom and small series. Various surface finishes are possible through our competent partners.

...The damping function is the result of the relative frictions between the ends and the strands of the rope. The suspension function is generated by the inherent bending elasticity of the rope, which is pre-shaped into loops. The unmatched properties of the wire rope are specifically valued in SOCITEC's products. The ropes are manufactured from stainless or galvanized steel according to our own specifications, ensuring complete traceability of all manufacturing materials.

...special cables, coaxial cables, motor cables, control and signal cables - Assembly of complete wire and cable sets (cross-sections up to 120mm², others upon request) - Customized delivery of cable and wire sets: bundled, labeled, and commissioned according to the installation process - Design and planning with material procurement (total or partial) - No storage costs due to just-in-time delivery - Electrical testing of all cables using test computers...

...Hollow pin chains (also partially referred to as double bushing chains) are almost exclusively used for double-strand conveyors. In this case, the chain strands are connected, for example, with cross rods, hinge bands, or wire belts. In addition to the standard versions according to DIN 8165 and DIN 8168, we also manufacture hollow pin chains according to factory standards and coordinate the design with our customers.

... strands cross over each other, a tight cohesion of the braid is maintained even under static or dynamic loads. The strands of the copper strips FCB are either crimped with copper sleeves under high pressure or press-welded at the connection surfaces. Cross-section 10 - 50 mm²: Special designs available upon request With insulation in silicone or PVC: Current load 65 - 222 A Single wires 0.15 - 0.20 mm: Connections press-welded Connections crimped with Cu sleeves: Other connection variants available upon request Hole center distance 100 - 300 mm: Hole Ø 6.5 - 10.5 mm...

...Manufacturing in wire diameters from 0.2 mm to approximately 20 mm, depending on the type of eyelet. Tension spring strands also available as stock items of 1 m, and upon request in lengths of up to approximately 20 m.

...Unique bow design according to the T-beam principle. This allows enormous weight savings (about 40%) without loss of robustness. Lower weight makes handling easier during replacement. Maximum energy savings and longer rotor bearing lifespan thanks to extreme weight reduction. Additional cast steel strands in the bow edges provide optimal protection in the event of wire breakages – especially with hard wires. Wire guides depending on product and customer requirements: Roller, ceramic, carbide or tempered steel guides possible.

...OCTOPUS, an extremely lightweight textile suspension, machine-made, without oval ring: • available with 2 or 4 strands. • particularly easy to use due to its very low self-weight. • versatile and customizable (can be combined with various hooks and fittings). • standard load capacities (WLL) ranging from 1.4 tons to 4.2 tons. • made from robust polyester double-walled tubing. • strand lengths from 1 to 6 meters available as standard. (custom and intermediate lengths or chain suspensions available upon request)...

...The processing of strands at BK-Metall includes the following steps: Straightening, stripping, cutting to length, bending, and forming flanges. For this purpose, a wire straightening and stripping machine as well as a flange press are available. Using specially manufactured bending tools for this purpose, the prepared strands are shaped according to customer specifications.

... and UP wire electrodes Overhead line ropes Aluminum-steel ropes Aluminum ropes High-temperature ropes Steel strands for earth lines Westfälische Drahtindustrie GmbH remains a significant player in various industries and contributes to technological development worldwide.

Your competent partner for enamelled wires and electrical insulating materials Our product range includes not only solderable and heat-resistant copper enamelled wire, aluminum enamelled wire, and baking enamelled wire but also copper wire, aluminum wire, copper strips, aluminum strips, HF strands, insulating materials, as well as insulating lacquers and resins. Tinned copper wire is also part...

...Delivery of baling wire/binding wire, Bremen rings/patent wound rings, binding wire rolls, directed rods, long strands, partitioned rings, corrugated wire mesh, fences, wire pins, nails...