titanium tubes Germany

...Cannulated titanium tubes made of Ti6Al4V ELI - from 100 pcs Bars in medical grade are cannulated and ground to your specifications. ID depending on the ID...

... pressure relief system, which allows for the most efficient insulation and enables the system to travel through every stage of your process. It can also be used in other solution heat treatment processes up to 900°C (1652°F) such as that for Titanium. Data Logger The Datapaq TP6 is the perfect solution for the most demanding high-temperature profiling applications with a 316-grade machined stainless...

...pacemaker housings, and surgical instruments. Titanium alloys have tensile strengths ranging from 290 to 1200 N/mm², which falls within the range of structural steels (310-690 N/mm²) and alloyed steels (1100-1300 N/mm²). Titanium materials are classified into pure titanium and titanium alloys, which are further divided into different grades (Gr) based on their alloying components. We offer bars, rods, wires, plates, foils, as well as the machining of titanium components according to drawings from all titanium alloys.

... in cramped fitting conditions. An IS-version is also available. Features: — nominal pressure: from 0 ... 4 mH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 22 mm — diaphragm ceramics 99.9% Al2O3 (on request) — highly appropriated for wastewater, sludge and viscous media Optional Features: — IS-version — housing material titanium — drinking water certificate according to DVGW and KTW — temperature element Pt 100 — mounting with stainless steel tube — different kinds of cables and elastomers...

...EGE flow rate sensors for the flow rate detection of 10...100 l/min feature one-piece measuring tubes with an inner diameter of 20 mm from highly resistant stainless steel V4A (1.4571). For particularly aggressive media EGE offers special materials, such as bronze, Hastelloy, titanium or even PTFE. The devices can either be set up intuitively using a potentiometer and LED indications or easily...

... flows through the tubes under the influence of gravity. Heat is transferred from the jacket side through the tube wall, causing the more volatile fraction to evaporate from the liquid film. Figure 1 shows a falling film evaporator as a co-current apparatus, where vapors and liquid flow from the lower part of the evaporator into an evaporation vessel. Material: Stainless steel, carbon steel, titanium, Hastelloy...

...Material: Stainless steel, titanium, copper, nickel silver, bronze, brass, aluminum, and special materials such as tantalum, NiCr, Monel, nickel, etc.

...AMETEK Specialty Metal Products offers a wide range of precision tubes manufactured by its subsidiaries Fine Tubes in the UK and Superior Tube in the USA.

...Manufacturing of seamless titanium tubes, titanium plasma parts according to drawing, raw blocks, sheets, etc. in various dimensions and materials according to specifications.

...Tube bag separating knives made from various material qualities, designed for separating very large sealed bags. Available in different versions, e.g., single-sided or double-sided serration, and with various tooth configurations - also available with a tear aid upon request. Depending on the application, they can be coated (in this case, TIN titanium nitride). Tube Bag Separating Knives Many...

...The raw material consists of seamless or welded, cold-drawn smooth tubes made from various materials (copper alloys, titanium, stainless steel, steel). Through a rolling process, the fins are produced from the tube wall – the tube and fin are made from a single piece. This ensures optimal heat transfer. In these application areas, types N and M have proven effective in a variety of processes...

...Angle thermocouples for measurement in salt or metal melts. Cost-effective design with a one-piece bent steel protection tube or a screwed version with interchangeable protection tubes made of, for example, steel, heat-resistant steel, SIC, titanium, or enamelled steel.

... other industries. In addition to copper or nickel alloys such as CuSn8 or CuNi18Zn20, we also utilize various titanium or stainless steel grades, along with a range of special materials. Thus, we are also specialized in the production of plated, multilayer tubes and wires that combine the positive properties of precious metal alloys with those of other materials.

... injection molding), and HIP (hot isostatic pressing). Available components: Thermal protection tubes, heating conductors, heating inserts (hot zones), holders, furnace installation parts, charging carriers, frames, boats, fastening elements, shields, MOTEX® components, retorts Typical materials: Molybdenum, titanium-zirconium-molybdenum (TZM), molybdenum-lanthanum (ML), tungsten, tantalum, niobium, rhenium...

...We offer bundle heat exchangers made of stainless steel or titanium. The pipes are welded or rolled into the tube sheet. In some cases, they are first rolled and then additionally welded. The bundles are made from U-tubes or straight continuous pipes. The shell space is equipped with segment or ring and disc plates to guide the secondary medium. In principle, we design the heat exchangers individually based on your requirements according to the VDI Heat Atlas.

...In CNC tube bending, we process tubes ranging from Ø 4 mm to Ø 50 mm made from all materials, including brass, steel, aluminum, stainless steel, and special steels like titanium or duplex. In CNC bending, the tubes are bent around a fixed die that always has the same radius, while the bending and rotation angles, as well as the lengths between the bends, are controlled by the CNC program. The...

... in all variations upon request. We also offer stainless steel tubes with side holes, various grinding shapes (facet, back, crown, biopsy, and epidural grinding), as well as different tip shapes. Are you interested in a custom design? Then we assure you absolute confidentiality right from the start. Please send us a drawing, sketch, or sample. We will be happy to provide you with a non-binding quote and, after consultation, create a prototype.

... the permanent cooling of the piezoceramic oscillator and the titanium booster. The cooling air hose is integrated into the HF control cable, eliminating the need for disruptive connection elements for a separate hose, and the cooling air is directed straight to the areas that need cooling. For this purpose, the handle is equipped with an outlet for the cooling air, which can be fitted with cooling tubes. In this version, the generator is also cooled by a built-in fan. An energy monitoring system can be integrated as an option. Booster Material: Titanium...

Titanium Pipes, Titanium Tubes, Titanium Semis, Titanium Rods, Titanium Sheets, Titanium Screws, Titanium Bolts...

... parts made from molybdenum, tantalum, tungsten, titanium, and their alloys (TZM, Alloys Invar, Alloys Kovar, Inconel). We supply you with finished parts according to drawings at attractive prices. Our own manufacturing facility produces according to your requirements, including individual parts or small quantities. We are also happy to assist you with design or suitable material selection. The...

... copper, brass, or aluminum. We offer the following forms of delivery: semi-finished products such as plates, sheets, foils, bars, wires, and pipes. Turned and milled parts, precision components, edge and bent parts, laser or water jet cut components, wire-eroded parts, standard + DIN fasteners, custom fasteners, micro screws, and titanium cast parts. As a surface finish, we offer brushed...

... our warehouse in Dinslaken. We manufacture according to national and international norms and standards, such as DIN, ISO, EN, NORSOK, ASTM, or AMS. Please contact us - we would be happy to create a suitable offer for you. Contract manufacturing: Titanium (semi-finished products, components, foil, round bar, wire, screws, nuts, Ti-AMS 4911, tantalum, zirconium, niobium, tungsten, molybdenum, copper, nickel, stainless steel, alloys, sintered alloys...

For over 50 years, we have been developers and manufacturers of precision tubes made from zirconium, titanium, and nickel-based alloys for use in the demanding sectors of the nuclear and chemical industries, the oil and gas industry, as well as for various special applications. As a partner to our customers, our manufacturing is consistently based on non-cutting forming processes using cold...

Hermith GmbH is a dynamic and innovative titanium manufacturer and supplier. Founded in 2004, Hermith has quickly emerged as a key player in the Titanium plates, round bars, tubes and wire landscape, known for its commitment to excellence, cutting-edge solutions, and customer satisfaction. We are able to arrange special production of flat product within the following dimensions: We can produce...

... sizes • Titanium powder, gas-atomized / spray-dried / PREP in various grain sizes for all common printing processes • Titanium wire on spools (special chemical composition available upon request) from 1.0mm to 6.35mm Possible processing: • Sawing • Cutting (shear, water jet, laser, wire cutting) • Welding • Forming • Mechanical processing • Pipe manufacturing for automotive applications (heat-resistant pipes for exhaust systems) Especially in the field of galvanics and surface treatment, we are an active and dynamic partner.

... our close integration of customer requirements and products, the experience from products used worldwide is incorporated. This holistic approach, combined with constant investment in facilities and personnel, ensures the high and innovative level of our products. In 1989, Thomas Lüdke took over the company and further expanded the area of titanium and special materials. The renaming to Schumacher...

...motorsport, aerospace, offshore, mechanical engineering sectors, and many more rely on this knowledge. Service Center: Nickel and titanium alloy sheets are processed using a water jet cutter. This machine cuts thicknesses from 0.4 to 50.0 mm according to customer drawings and specifications. A coil processing system ensures that sheets up to 1.6 mm can be quickly unrolled and, if necessary, rewound...

Since 1938, Marburger has been a manufacturer of heat exchangers and finned tubes for thermal equipment, the chemical industry, and plant engineering. From individual components to complete compact systems, we produce heat exchangers and finned tubes for our customers and their applications. The materials used include copper and copper alloys, aluminum, steel, stainless steels, titanium, and...

...:2008. The plastic is weather-resistant and UV-resistant. The aluminum is available in many alloys. The distribution of technical extrusion or press profiles made from various materials such as plastic, rubber, aluminum in different alloys, brass, copper, titanium, and many other materials is part of our core competence. Regardless of the industry – we realize custom profile solutions from A to Z. Through our development and planning department for extrusion or press tools, we can respond flexibly and individually to customer requests.

... titanium (Ti Grade 1 / Ti Grade 2) as well as titanium alloys (Ti Grade 5), also known as aerospace grades according to material performance sheet 3.7164, AMS 4928, we can meet even the most complex requirements for you - with a quality that withstands even the most extraordinary demands.