power resistor Germany

...A drive motor can also act as a generator. If the drive system is built so as to allow reverse power to flow then this power can be fed into a resistor, thus taking energy out of the system and causing whatever is driving the motor to slow down. Following to this the braking resistor converts the stop energy into heat. Electrical drive systems are being used more and more on ships, oil rigs...

... according to VDE 0570-2-6 / EN 61558-2-6 with built-in safety transformer input-side matching taps mounting dimensions according to DIN 41308 finger-safe connections to screw terminals with self-releasing terminal clamps output-side circuitry: varistor, filter capacitor (105°C) and discharge resistor output-side components covered and finger-safe according to VDE 0106, Part 100 high-quality, tropical...

... W — Manufacturing range 1 mΩ ... 100 mΩ — Construction in 4-wire technology — Error tolerance 0.02 % — Suitable for technical frequency 50 Hz Resistance value: 1 mΩ / 10 mΩ / 100 mΩ Tolerance: 0.02 % Temperature coefficient: ≤ ± 10 ppm/K Long-term stability: < 0.01 % over years Power: 20 W Operating temperature range: 0 ... +23 ... +40 °C...

...CSN® Dummy Load Resistors used as dummy loads for testing high frequency radio transmitter systems. Schniewindt had already supplied dummy load resistors with rated max. cont. power up to 1500 kW. CSN® Dummy Load Resistors are designed and manufactured individually to customer requirements and specific application. ...

... the size. It features an internal switching mechanism that toggles the output voltage from bridge rectification to half-wave rectification. The duration of the bridge rectification can be adjusted by replacing the external resistor (Rext) from 0.05 to 2 seconds. ✓ Operation of the consumer with over-excitation or power reduction ✓ Input voltage: 100 - 500 VAC ✓ Maximum output current Ieff: 3 A at 250 VAC...

...Frequency inverter for operating sensorless AC and BLDC motors 640VA / S1-100%, integrated brake chopper resistor, 28.5kHz PWM, 4000 Hz rotational frequency - When space is limited and high power is required - The ideal solution for all CAD/CAM and dental applications - Perfect performance across all power ranges with outstanding high acceleration and braking capability and 28.5 kHz PWM - For all temperature sensors: PTC, KTY, and PT1000 Power: 640VA PWM Frequency: 28.5 kHz Maximum Rotational Frequency: 4000Hz...

... protected from short-circuit and overload. The short-circuit current is limited by the output transistor switching off inthe event of a fault. It will automatically reset as soon as the fault has been remedied. The switch is available with ground-connected, plus-connected or potential-free DC switching output. The switch is open in the event of power failure or disconnection of the power supply, independed of the switching function. It is available both as normally open (NO) or normally closed (NC) switch.

...MKP Power Capacitor (Metal-Polypropylene) Technical Data: • Impregnation: Semi-Dry (biodegradable resin) • Power Range: 0.5 ... 40.0 kvar • Voltage Range: 230 ... 525 VAC; 50/60Hz • Inrush Current: up to 200 x In • Temperature Range: -40 ... 55°C • Total Loss Power: < 0.45W/kvar • Safety: self-healing, internal rupture protection • Lifespan: up to 135,000h (temperature-dependent) • Cylindrical Aluminum Housing • Connections: Screw terminal, finger-safe, IP20 • Discharge Resistor: standard • Standards: IEC 60831-1+2, UL810, cUL, CSA, GOST Circuit: Single-phase...

...Special construction 150 kVA in customer-specified color Feeser water-cooled diesel generator Continuous power PRP 150 kVA Current 216.5 A - Socket package - Load resistor - Special color as per customer request...

... SINECUT slitting technology and optimized winding geometries. This enables us to design AC capacitors with a high specific ratio of capacitance to volume, high AC-voltage load capacity and outstanding suitability for high rms and surge currents. The cylindrical capacitors of our universal AC/DC series "E62" are perfect for non-sinusoidal voltages and pulsed currents, e.g. as damping or commutation capacitors switched in parallel to a thyristor, or connected in series with a resistor (damping of undesirable voltage spikes during the switching of power semiconductors).

... Bigger Size LEDs Super Flux LEDs High Power LEDs (1 W, 3 W, 5 W, etc.) Low Current LED Lamps Bi-color (Tri-Color) LEDs 5V/12V Resistor LED Lamps Blinking (Flashing) LEDs Taped LED Lamps Axial Lead LED Lamps Backlight LED Lamps...

... power and short time constant. For high volume applications such as building air conditioning, automation and others, the JSIR 340 is suitable due to its excellent price/performance ratio. The packaging with reflector is good for measurement distances from 2 cm. The MEMS emitter chip consists of a multilayer hotplate membrane containing a high temperature stable metal C-MOSI layer. The...

...By using a power contactor sized for the rated input current in combination with a second power contactor tailored to the pre-magnetization current, the ICL can be used like a main contactor (coil voltage 230VAC). Connections up to 95A are made via terminals; above that, directly at the main power contactor. Up to 10 switch-ons per hour are allowed. The ICL is optimized for vertical installation on a mounting plate.

...Steel grid fixed resistance device with protection class IP 00, featuring side panels for installation in the control cabinet. Connection to the resistor. Particularly compact design, as the housing size is proportional to the steel grid installation • For small to medium power ratings • Continuous power ratings up to 22 kW • For installation in control cabinets • Optional with temperature switch (TS), with plug connections 6.3x0.8, type then FKEQ 31...

... of the measuring point is always unheated. To compensate for the resulting temperature gradient as much as possible, the cartridge is generally power-enhanced in close proximity to the measuring point. Available Dimensions exclusively custom-made Diameter 6.5 mm, 8 mm, 10 mm, 12.5 mm (metric) ¼'', 3/8'', ½'' (inch) Lengths 40 mm, 50 mm, 60 mm, 80 mm, 100 mm, 130 mm, 160 mm, 180 mm, 200 mm (metric) 1 ½'', 2'', 2 ½'', 2'', 4'', 5'', 6'', 7'', 8'' (inch) Power 100 W to 2,000 W Voltage 230 V...

... IE2 High Efficiency Special applikations Mechanical variants Protection IP56, IP65, IP66 Special flanges and shafts Without terminal box Uni-directional bearings, locked bearings or special bearings SPM-vibrations measurement Electrical variants Special voltage and frequency Heaters Bimetallic thermal protection (NC, NO), thermistor (PTC), platinum resistor (PT100) Single-phase with permanent...

... customized setup. Currently, two sizes are available, covering a power range from 0.55 to 5.5 kW. The INVEOR MP includes all essential features of the INVEOR M and additionally offers the following criteria that make it even more adaptable.

...To ensure the functionality of power generators and UPS systems, they should undergo monthly test runs. If the internal load is insufficient, load resistors will be used for this purpose. Our team is happy to assist you in choosing the load bank and the necessary accessories. Larger total capacities are also available upon request!

... infrared heat: from heaters for terraces, beer gardens, workplaces, etc., to industrial infrared heaters for large halls. Other specialists are needed when liquids, rather than air, need to be heated. A daily task for screw-in heating elements in various fields. Power levels from 500W to 12kW are available from stock, with series featuring and without controllers or limiters.

... electronics, sensor technology, and safety engineering. Other important specialty products from our own production include non-magnetic resistors for medical technology, adhesive chip resistors for automotive electronics, and high-temperature resistors for various applications such as deep drilling technology. Today, the export share of SRT Resistor Technology is over 65%. The Asian market, in...